What is the extreme fuel consumption of the Accord Hybrid?

Where is the motorcycle three-way catalytic converter located?

Motorcycle three-way catalytic converters are located inside the exhaust pipe. Here's some information about three-way catalytic converters: 1. Installation regulations: According to the regulations of the Ministry of Environmental Protection of the People's Republic of China, not every motorcycle is equipped with one. 2. Three-way catalytic converter: It is the most important external purification device installed in the exhaust system, which can convert harmful gases such as CO, HC, and NOx in the exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. When high-temperature exhaust passes through the purification device, the purifying agent in the three-way catalytic converter enhances the activity of CO, HC, and NOx, promoting certain oxidation-reduction chemical reactions. CO is oxidized into colorless, non-toxic carbon dioxide gas at high temperatures; HC compounds are oxidized into water (H2O) and carbon dioxide; NOx is reduced into nitrogen and oxygen. These three harmful gases are transformed into harmless gases, thereby purifying the vehicle's exhaust emissions.

15

2

Share

How to Repair a Crack in Glass?

Fill the crack with liquid resin, clean the gap, and use a vacuum injector to remove the air inside the glass crack. Then, fill it with liquid resin. After repeatedly extracting and pressing, use a UV lamp to irradiate for two minutes in all directions (up, down, left, and right) to allow the repair solution to solidify. Next, apply a high-concentration repair agent to the crack, cover it with a glass piece, and dry it. Finally, use a blade to level the surface, apply a polishing agent, and polish it with a cloth. Below is relevant information about automotive glass: 1. Manufacturing Process: Automotive glass is made by heating the glass in a furnace to near its softening temperature, then quickly transferring it to air grids with different cooling intensities for uneven cooling, creating varying stress levels between the main viewing area and the peripheral areas. 2. Types: It is divided into laminated glass and tempered glass. Laminated glass is a glass product made by bonding two or more layers of glass with one or more layers of transparent adhesive material. Tempered glass includes physical tempering and chemical tempering, with the commonly referred tempered glass being physically tempered.

4

2

Share

Which way to steer when the front is narrow and the rear is wide?

When the front is narrow and the rear is wide, steer towards the wider side to make the wider side narrower and avoid the other side crossing the line. Below are some steering precautions: 1. Check behind the car before reversing: Estimate the reversing route and determine whether the front of the car will hit obstacles during reversing. Especially when the steering wheel is turned significantly, the turning radius of the front wheels is larger than that of the rear wheels, and the front of the car swings outward more during reversing. Be careful to avoid scraping the front of the car. This method is more suitable when parking on the right side or when a longer reversing distance is required. 2. Rear steering: If the rear of the car needs to move to the right rear, turn the steering wheel to the right; conversely, turn it to the left. This is the same as the steering operation when driving forward. 3. Reversing: Do not only look behind the car while reversing. While ensuring safety behind the car, occasionally observe the left and right rearview mirrors, pay attention to the distance between obstacles and the car body, and use the steering wheel to adjust the car's position while reversing.

10

0

Share

What is the impact of toe-in size on handling?

Excessive toe-in can cause excessive wear on the inner edges of the front tires and make the steering wheel heavier to turn. On the other hand, insufficient toe-in can lead to excessive wear on the outer edges of the front tires and prevent the steering from automatically returning to center. Below is an introduction to toe-in: 1. Definition of toe-in: Front wheel toe-in refers to the condition where the front edges of the two front wheels are closer together than the rear edges. The difference in distance is called the toe-in value. Viewed from above the car, the two front wheels form a "V" shape pointing upwards. Toe-in can also refer to the angle between the front wheel plane and the direction of the car's movement, in which case it is called the toe-in angle. 2. Precautions for adjusting toe-in: Measure the distance between the centers of the front wheels at the middle, then measure the distance between the rear edges of the front wheels. The difference between these two measurements is the toe-in value. Correction is needed when the toe-in value exceeds 0-12mm.

5

0

Share

Does Carburetor Cleaner Have Corrosion?

Carburetor cleaner is not corrosive. Here is the relevant introduction about carburetor cleaner: 1. Definition of carburetor: Carburetor cleaner is a type of cleaning agent mainly used for cleaning amorphous carbon deposits and graphite carbon deposits on various workpieces, carburetors, and inside engines. It can also be used for cleaning amorphous carbon deposits and graphite carbon deposits on various catalysts. 2. Function of carburetor: Effectively cleans oil sludge and other contaminants on the surfaces of throttle valves and engine components. Effectively removes gum and carbon deposits from throttle valves, intake passages, and exhaust gas recirculation systems. Improves starting performance, enhances acceleration, eliminates unstable idle, and reduces emissions.

2

4

Share

Why is there ghosting on the car's front windshield film?

Ghosting on the car's front windshield film may be caused by poor film quality or improper installation. Here are some precautions for car window tinting: 1. Avoid washing the car: Try to avoid washing the car within three days after tinting to prevent the film from peeling off due to moisture. Also, refrain from using the rear window defroster for a week, as moisture can adversely affect the defroster lines. After installation, you can gently wipe the film surface with a wet towel, sponge, or soft cloth. Additionally, you may notice a hazy appearance caused by water vapor inside the film during the drying process, which is normal and will gradually disappear. 2. Avoid rolling windows up and down: For the first week after tinting, try to avoid rolling the windows up and down (especially for newly tinted cars). It takes 5-7 days for the film to firmly adhere to the window. During this period, the edges of the film can easily curl or shift when the windows are operated. 3. Be careful when cleaning: If stains appear on the film, avoid using chemical solvents. Instead, use a damp cleaning towel, water-soaked paper towels, a cloth with mild detergent, or a rubber squeegee for cleaning. Avoid using abrasive materials or tools that could scratch or damage the film to protect the window tint.

3

4

Share

What is the extreme fuel consumption of the Accord Hybrid?

Where is the motorcycle three-way catalytic converter located?

How to Repair a Crack in Glass?

Which way to steer when the front is narrow and the rear is wide?

What is the impact of toe-in size on handling?

Does Carburetor Cleaner Have Corrosion?

Why is there ghosting on the car's front windshield film?

What does Porsche PASM mean?

Why does the car overheat after driving for a while?

What is the tire size?

How long does it take for the water temperature to normalize after starting the car?