What is the explanation of the buttons in the Porsche Panamera?

3 Answers
McBriella
07/29/25 9:08pm
Porsche Panamera's interior design is luxurious and high-end, with various buttons full of technological sense. Here is the explanation of the buttons in the Panamera: 1. Trunk switch button: The button with the trunk opening pattern is used to open and close the trunk. 2. Central locking button: Press the central locking button "open lock" on the door panel or the "lock" button on the rear center console. 3. Other buttons: They are: driving mode selection, body height adjustment, suspension mode adjustment, and PSM stability management system switch. In daily driving, these buttons provide great help in precise adjustments for different situations.
Was this review help?
1
5
Share
AdrianDella
08/15/25 7:22pm
After driving the Panamera for a while, I find the button layout quite user-friendly. The left button on the steering wheel controls adaptive cruise, the right button adjusts volume, and there's a voice assistant button below. The air conditioning buttons on the center console are especially practical—just press the auto mode to automatically adjust airflow and temperature without manual hassle. The seat heating and ventilation buttons on the side make driving comfortable in both winter and summer. The navigation button near the touchscreen lets you input destinations with a single press. The engine start button is conveniently located to the left of the instrument panel. These button designs prioritize daily driving convenience, ensuring you don’t get distracted searching for functions on the highway. Trying out each button’s function helps you get more familiar—like the drive mode switch button, which effectively adjusts suspension response.
Was this review help?
14
5
Share
Expand All
SanLena
10/17/25 2:02am
As someone who frequently test drives cars, the Panamera's button functions are rich and intuitive. The steering wheel shortcuts handle media and calls, such as skipping tracks or answering calls with a single press. The central control's air conditioning area features direct knobs for temperature adjustment, with an auto button enabling smart regulation that automatically matches fan speed based on cabin temperature. Additionally, the door buttons include memory seat functions, making it convenient to save personal positions. The drive select button allows quick switching between driving modes, such as sport or comfort. I find the buttons have a good tactile feel, crisp feedback, and are effortless to operate, making them easy for beginners to get the hang of after consulting the manual or experimenting a bit. The entertainment system buttons are located near the screen for quick access.
Was this review help?
8
0
Share
Expand All
More Forum Discussions

What to Do When Your Car Gets Scratched by Someone Else on the Road?

Some car owners may not know that dash cams are not only capable of recording while the vehicle is in motion; even when parked and turned off, the dash cam can still function. Generally, when parking in a parking lot or public area, there are usually responsible personnel around. Since parking fees are charged, they also have the obligation to help look after the vehicles. If the car scratch is relatively severe, you can call the police and request traffic police assistance. They will review surrounding surveillance footage from the relevant time period to identify any suspicious vehicles.
4
3
Share

How to Cool Down a Car Quickly?

Starting the car and immediately turning on the air conditioning to cool down often results in the interior temperature being higher than the ambient temperature, which can increase engine load and fuel consumption. Use a lower fan speed when there are fewer people in the car and a higher speed when there are more. For example, when there are only one or two people in the car, the first fan speed setting is usually sufficient. Cold air tends to sink, so directing the airflow upward can help neutralize the rising warm air, effectively speeding up the cooling process. In summer, bacteria from dust can combine with condensation and clog components like the evaporator. It's best to clean the air conditioning radiator before using the AC.
1
3
Share

How to Replace the Fog Lights on a Hyundai Santa Fe?

Method for replacing the fog lights on a Hyundai Santa Fe: 1. Before installation, ensure the car is parked and turned off, preferably on a flat surface, and engage the parking brake; 2. Disconnect the fog light switch, unplug the power supply, and disconnect its electrical system; 3. Remove the washers, screws, and nuts to take off the lamp cover and extract the old bulb; 4. Install the new fog light, place washers on the screws, tighten the nuts with an adjustable wrench to secure the fog light, and reconnect the power supply. The Santa Fe's body dimensions are 4930mm in length, 1910mm in width, and 1720mm in height, with a wheelbase of 2865mm. The new Hyundai Santa Fe is equipped with a 2.0-liter turbocharged engine, delivering a maximum horsepower of 240 hp and a peak torque of 353 Nm, with maximum power output at 6000 rpm and maximum torque available between 1450 to 3500 rpm.
15
5
Share

How to Adjust the Auto-Dipping Function of Volkswagen Side Mirrors?

First, power on the vehicle but do not start the engine (do not press the brake pedal). Second, set the memory seat by selecting the seat position, choose the side mirror that needs adjustment, and press the mirror adjustment selection button. Third, press the brake and shift to R gear. At this point, the selected mirror will automatically dip to the factory preset position. Finally, press the brake and shift to P gear, then press the mirror adjustment selection button once more.
2
5
Share

How to Properly Install a Gear Pump?

When tightening the end-face bolts of the gear oil pump, apply force symmetrically and evenly while rotating the rotor. If any jamming occurs, loosen the bolts and retighten them. The connection between the drive shaft of the electric pump and the motor shaft should use an elastic coupling or chain coupling. The pump drive shaft cannot bear any radial vertical force, such as from belt or other side-drive methods. The base plate must be strong enough to prevent misalignment between the motor and the pump, which could damage the pump. Ensure that the fluid enters the inlet, and avoid dry running or idling as much as possible. Do not reverse the inlet and outlet of the gear oil pump.
13
3
Share

How to Wrap a Steering Wheel Cover?

First, place the cover at the 6 o'clock position, then use your legs to brace the steering wheel while using both hands to position the cover at the 9 o'clock and 3 o'clock positions. Ensure the cover is properly aligned on both sides after positioning. Use masking tape to wrap around the steering wheel cover for external positioning, removing the tape as you sew. Thread the needle and start sewing from the bottom. After making the first stitch, don’t rush to continue sewing. First, tuck the edges by using a trim tool to push the leather into the gaps. Once everything is aligned, proceed with sewing. It’s recommended to maintain moderate tension during sewing. Initially, you don’t need to pull the thread too tight. After sewing a section, use the needle to adjust and tighten the thread before continuing.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.