What is the examination process for a B2 driver's license?

3 Answers
RosalieAnn
07/28/25 3:03pm
The examination process for a B2 driver's license is as follows: 1. Basic test items: pole test, hill start and stop, parallel parking, single-plank bridge crossing, curve driving, right-angle turning, speed-limited passing through narrow gates, continuous obstacle crossing, 100-meter gear shifting, and bumpy road driving. 2. For large buses, tractors, city buses, medium-sized buses, and large trucks, the test items must not be fewer than 6. 3. For small cars, small automatic transmission cars, low-speed trucks, ordinary three-wheeled motorcycles, and ordinary two-wheeled motorcycles, the test items must not be fewer than 4.
Was this review help?
5
2
Share
LaPiper
08/11/25 7:29pm
I just got my B2 driver's license last year, and the whole process went quite smoothly, taking about six weeks. First, I went to the hospital for a physical exam to check my vision and overall health, and only after passing could I enroll in a driving school. The enrollment fee was over 4,000 yuan, and I chose a reliable instructor. Before the theory test for Subject 1, I used a mobile app to practice questions daily, covering traffic rules and key points, and passed it on the first try. Then, I started practicing for the Subject 2 yard test, with reverse parking being the hardest to master—I had to practice repeatedly to get the technique right and avoid crossing lines for penalties. On the day of the Subject 3 road test, I drove a real car on the road with the examiner sitting beside me, paying close attention to traffic lights and pedestrians. I was nervous but stayed composed. Finally, Subject 4 tested safety knowledge, and passing it easily led to receiving my license. My advice is to book more practice sessions, don’t hesitate to spend extra to get comfortable, and practice night driving a few more times to build confidence. After getting the license, driving a large vehicle has given me a greater sense of responsibility.
Was this review help?
11
1
Share
Expand All
Elliot
09/29/25 4:42am
The B2 driver's license test process is divided into five stages. First, the medical examination stage requires a hospital check-up to ensure physical fitness before enrolling in a driving school. Second, the theoretical test for Subject 1 involves studying traffic regulations and practicing question banks, with special attention to detail questions. Third, the field test for Subject 2 focuses on skills like reverse parking, parallel parking, and hill starts—practice simulations to minimize mistakes. Fourth, the road test for Subject 3 evaluates real driving and adaptability; follow rules and avoid speeding. Fifth, the written test for Subject 4 covers safety knowledge, followed by waiting for the license issuance. The entire process takes at least five weeks, and intensive training courses can save time. Remember to plan your learning schedule wisely to avoid work conflicts. The key is mastering each subject to prevent retakes and delays.
Was this review help?
18
5
Share
Expand All
More Forum Discussions

What Causes Weak Clutch Pedal Return?

Weak clutch pedal return may be caused by insufficient or broken clutch return spring tension. Here are the possible causes: 1. Contaminants in clutch system: Air in the clutch hydraulic system can cause excessive pedal travel and poor return. Dirty clutch fluid with contaminants may lead to severe wear of the clutch master cylinder (piston) or blocked return ports, preventing proper clutch return. 2. Aging return spring: With increasing mileage, the clutch return spring may lose tension or break, resulting in unreturned clutch pedal. Symptoms include lowered pedal height and reduced or eliminated free play. 3. Worn clutch linkage: Excessive wear in the clutch push rod can cause poor return, requiring replacement of either the clutch master cylinder or linkage mechanism.
4
3
Share

Is there a distance limit for pulling over to the side?

There is a distance limit for pulling over to the side, which stipulates that the vehicle's tires should be about 30cm from the roadside. Below are specific details about pulling over to the side: 1. Deduction criteria: When pulling over to the side, if the body of the vehicle is more than 30cm from the right edge of the road or the sidewalk after parking, 10 points will be deducted; if the parking brake is not fully engaged after parking, another 10 points will be deducted. 2. Using the right rearview mirror: Use the right rearview mirror to observe the distance between the vehicle and the roadside, especially during parallel parking, to avoid the tires rubbing against or being squeezed by the roadside. When the right door handle overlaps or just touches the roadside line, the distance between the body of the vehicle and the right edge of the road or the sidewalk is generally within 30cm.
2
0
Share

How high is the rear middle hump in the Sagitar?

The rear middle hump in the Sagitar is relatively high, measuring 19.5 cm. More details about the Sagitar are as follows: 1. The rear hump in cars is related to the drive shaft: The drive shaft is located near the rear wheels, which is why the middle of the rear seat tends to protrude. Vehicles equipped with independent rear suspension systems also tend to have a more prominent rear middle hump. 2. The Sagitar is a compact sedan produced by FAW-Volkswagen, and the rear middle hump can affect comfort: The Sagitar is available with a 1.2L turbocharged engine, a 1.4L turbocharged engine, or a 1.6L naturally aspirated engine. It features a MacPherson strut front suspension and a multi-link independent rear suspension. The rear middle hump can impact the comfort of passengers seated in the middle of the rear row.
1
1
Share

What is the model of the chain sprocket?

Here is an introduction to the model of chain sprockets: 1. Chinese sprocket classification standards: In China, sprockets are classified based on imperial units. They are divided into 3/8, 1/2, 5/8, 3/4, etc., and also include single, double, triple, and quadruple rows, etc. The row spacing for double, triple, and quadruple rows is manufactured according to national standards. Additionally, there are sprockets with models denoted by letters A and B, where A represents plate sprockets and B represents table sprockets. In the model B1-2-3, the numbers 1, 2, and 3 represent single, double, and triple rows, respectively. The tooth thickness varies for sprockets of different sizes. 2. Chain transmission method: Sprockets are driven by chains, and the model units are generally imperial. They come in single, double, and multiple rows. They are suitable for low-speed, heavy-load, and high-temperature conditions. Compared to gears, they can be used in situations where the distance between two shafts is relatively large. Gears transmit power through meshing, and the model units are mostly metric, represented by modulus. They can transmit a wide range of power and speed. Their compact structure allows for large transmission ratios, high efficiency, and long service life.
20
0
Share

How to Use the Built-in Wiper Buttons on the BMW 5 Series?

The usage method of the built-in wiper buttons on the BMW 5 Series is as follows: 1. Pull the lever toward the driver to activate the washer function; 2. Rotate the central dial to adjust the working frequency of the low-speed or high-speed wipers; 3. Move the lever to the 0 position to stop the wipers; 4. Switch to AUTO mode for automatic wiper operation; 5. Push to 1X for a single wipe. The BMW 5 Series is a mid-size sedan under the BMW brand, with dimensions of 4998mm in length, 1901mm in width, and 1559mm in height, and a wheelbase of 3108mm. The vehicle features BMW's iconic design elements, presenting an elongated, elegant, and sporty silhouette. It comes equipped with rear-seat entertainment, adaptive headlights, rain sensors, iDrive control knob, and other configurations.
6
2
Share

Does the Lavida have a navigation system?

The Lavida does not come with a built-in navigation system; the navigation systems found in the car are all installed after leaving the factory. The navigation system features a GPS global satellite positioning system, allowing drivers to always know their exact location while driving. GPS technology utilizes GPS satellite signal reception, enabling continuous 24-hour reception of data parameters sent by satellites to calculate the receiver's three-dimensional position, three-dimensional direction, movement speed, and time information. The Lavida is a sedan produced by Shanghai Volkswagen, with dimensions of 4605mm in length, 1765mm in width, and 1460mm in height, and a wheelbase of 2610mm. The front face of the car cleverly employs horizontally extending design elements, significantly enhancing the vehicle's lateral presence. The dynamic and smooth curves of the front end, especially the refined and bold chrome radiator grille and the crystal-clear diamond headlights, convey a sense of striking power, embodying the vibrant characteristics of the new era.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.