What is the ESQ car?

Does Minor Cylinder Scoring Require an Overhaul?

Minor cylinder scoring does require an overhaul. The main cause of cylinder scoring in automobiles is insufficient engine oil, which leads to excessively high temperatures during continuous engine operation. This can cause certain damage to bearings and pistons, and the extreme heat may also result in cylinder block cracking, severely affecting vehicle performance. Automobile cylinder scoring refers to the 'welding' abrasion between the piston, piston rings, and cylinder liner surfaces due to high temperatures. Specifically, it occurs when the oil film between the piston and cylinder liner breaks down, causing dry friction. The intense frictional heat leads to microscopic metal melting and adhesion, tearing nearby metal particles. According to gas sealing requirements, the clearance between piston rings and cylinder liners should be as small as possible, creating extremely unfavorable lubrication conditions.

19

1

Share

Why is the gear shifting not smooth after changing the transmission oil?

Gear shifting not being smooth after changing the transmission oil is likely due to the poor quality of the transmission oil used. It is recommended to replace it with transmission oil of the appropriate viscosity. Transmission oil is a lubricant that maintains the cleanliness of the gear system, providing lubrication to extend the lifespan of the transmission components. It offers effective lubrication even in low-temperature conditions and reduces oil loss under harsh operating conditions. Depending on the structure of the transmission, transmission oil is categorized into automatic transmission fluid (ATF) and manual transmission oil. ATF is specifically designed for automatic transmissions, while manual transmission oil is used for lubricating hypoid gear drive shafts and manual transmissions that operate under severe conditions with high impact loads.

16

4

Share

How to solve the low-speed jerking issue of Peugeot 408?

The solution to the low-speed jerking issue of Peugeot 408 is to clean the carbon deposits in the throttle body, fuel injectors, and intake manifold. Taking the Peugeot 408 2020 230THP 10th Anniversary Edition as an example: The manufacturer of this car is Dongfeng Peugeot, classified as a compact car with gasoline as the energy type, featuring a maximum power of 100kw and a maximum torque of 230nm. The car's dimensions are 4750mm in length, 1820mm in width, and 1488mm in height, with a wheelbase of 2730mm. It is a 4-door, 5-seater sedan with a 6-speed dual-clutch transmission, a top speed of 205 km/h, and a turbocharged intake form.

5

4

Share

Where is the Wiper?

The wiper is located in front of the windshield. Its technical name is the windshield wiper, which refers to the blade structure installed in front of the windshield. It consists of components such as an electric motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly. Its primary function is to clear rain, snow, and dust from the windshield that obstructs visibility. The intermittent flexible wiper allows the driver to adjust it according to the intensity of the rain and visibility conditions. Unlike ordinary wipers installed on other vehicles, it can automatically adjust the wiping speed based on changes in vehicle speed. This is because, with the same amount of rainfall, the faster the vehicle speed, the more rainwater hits the windshield. Additionally, when the vehicle is stationary, the wiper operates at a reduced speed, thereby minimizing noise.

19

1

Share

What is 220kpa in tire pressure?

220kpa equals 2.2bar tire pressure. Tire pressure refers to the air pressure inside the tire, and the level of tire pressure plays a crucial role in the performance and power of the vehicle. Tires are circular elastic rubber products mounted on various vehicles or machinery for rolling contact with the ground. Tires are usually installed on metal rims to support the vehicle body, cushion external impacts, achieve contact with the road surface, and ensure the driving performance of the vehicle. Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must have high load-bearing capacity, traction performance, and cushioning performance. At the same time, tires are also required to have high wear resistance and flex resistance, as well as low rolling resistance and heat generation.

18

5

Share

How many liters of transmission oil does the MG GT need?

MG GT requires 5 liters of transmission oil. The relevant information about transmission oil is as follows: Consequences of not changing the oil for a long time: Automatic transmission oil is different from manual transmission oil. Automatic transmission oil not only lubricates but also facilitates gear shifting. Therefore, not changing the oil for a long time can lead to poor lubrication, severe wear of components, and a shortened lifespan of the transmission. It can also cause strong jerks during gear shifting. Hence, it is necessary to change the transmission oil regularly, and the transmission oil filter should also be replaced at the same time. Methods of changing transmission oil: There are two methods: gravity change and machine circulation change. It is recommended to use the machine circulation method because it can clean the transmission, whereas the gravity method only replaces the oil and does not clean the transmission.

3

4

Share

What is the ESQ car?

Does Minor Cylinder Scoring Require an Overhaul?

Why is the gear shifting not smooth after changing the transmission oil?

How to solve the low-speed jerking issue of Peugeot 408?

Where is the Wiper?

What is 220kpa in tire pressure?

How many liters of transmission oil does the MG GT need?

What is the Function of the Grille?

Can I switch to C2 after failing the C1 subject 2 test once?

What are the reasons for the sudden loss of power in the battery?

Where is the air intake for the car's internal circulation located?