What is the equivalent of the Mercedes-Benz ML350 today?

How to tighten the handbrake on a Passat B5?

Open the center console and remove the two fixing screws inside, then loosen the handbrake cable fixing bolt to its most relaxed state. Start the car in neutral, press the brake pedal a few times, and you will see the previously stretched cable retract. Begin tightening the handbrake cable fixing bolt. Generally, when the bolt is exposed by about 1 cm, start testing the handbrake. After adjustment, release the handbrake, start the car, press the brake pedal a few times, turn off the engine, and get out of the car. If it doesn't feel too strenuous, the adjustment is good.

19

4

Share

How to Turn on the Seat Ventilation in a Panamera?

Press the seat ventilation switch, which is generally located on both sides of the MENU button. Seat ventilation releases cool air through small holes in the seat cushion and backrest, preventing sweat buildup on the hips and back, and providing a comfortable riding environment. Press the seat heating switch, and the seat heating uses the electric heating wires inside the seat to heat the interior, transferring the heat to the occupant through thermal conduction to improve discomfort. Press the seat massage switch to activate the massage function, alleviating fatigue from long drives.

13

1

Share

Can FLAC files be played in the car?

FLAC stands for Free Lossless Audio Codec, which can be interpreted as lossless audio compression encoding in Chinese. FLAC is a well-known set of free audio compression codecs characterized by lossless compression. Whether it can be played depends on the specific car model. Some models can play FLAC format files, while others cannot. Check if the player installed in your car supports the FLAC format. Most models only support playback in MP3 or WAV formats. FLAC is different from MP3. MP3 is a lossy compression encoding for audio, but FLAC is lossless compression, so audio compressed with FLAC does not lose any information. When a FLAC file is restored to a WAV file, the content is similar to the original WAV file before compression.

5

Share

Which company manufactures the Lynk & Co 03?

Lynk & Co 03 is the third mass-produced model manufactured by the Lynk & Co brand. Here is relevant information: 1. Lynk & Co: Lynk & Co is a premium brand featuring European technology, European design, global manufacturing, and global sales. In August 2017, Geely Auto, Volvo Cars, and Zhejiang Geely Holding Group signed a joint venture agreement, making Lynk & Co a premium joint venture brand of Geely Auto and Volvo Cars. 2. Comprehensive Evaluation: Backed by Volvo's technology, the Lynk & Co 03 is a genuine model with luxury pedigree, effectively combining the 'essence' of both Geely Auto and Volvo Cars. It offers premium quality without the luxury price tag.

12

5

Share

What are the differences between DM-p and DM-i?

The differences between DM-i and DM-p include technology, motor, displacement, transmission, and drive. The specific details are as follows: Technology differences: The design goal of DM-i is fuel efficiency, while DM-p aims for performance. Their structures, motor-engine selection, and configurations are all based on these design goals. The 2.0T engine equipped in DM-p has stronger performance data but uses more traditional technology. In contrast, DM-i's latest 1.5T Xiaoyun engine adopts the Miller cycle, featuring more advanced technology, higher thermal efficiency, and lower fuel consumption. Motor differences: Although both use permanent magnet synchronous motors, DM-i models all feature a front-mounted single motor, available in 145kW and 160kW versions. DM-p, besides having a rear-mounted 180kW single motor version, also offers two dual-motor models with front + rear (250kW + 180kW) configurations. Displacement differences: Both are equipped with turbocharged engines, but DM-p uses a 2.0T engine with a maximum power of 192 horsepower (141kW) and maximum torque of 320Nm. DM-i, on the other hand, uses a smaller 1.5T engine with a maximum power of 139 horsepower (102kW) and maximum torque of 231Nm. Transmission differences: DM-p is equipped with a traditional 6-speed wet dual-clutch transmission, while DM-i uses an E-CVT continuously variable transmission. Drive differences: All DM-p models are four-wheel drive, while DM-i models are two-wheel drive. The core concept of DM-i is electricity-first, fuel-supplemented. Structurally, DM-i super hybrid is based on a large-capacity battery and high-power motor. During driving, the vehicle primarily relies on the high-power motor for propulsion, while the gasoline engine mainly functions to charge the battery. It directly drives the wheels only when more power is needed, and even then, it works in synergy with the motor to reduce load. This hybrid technology differs from traditional hybrid systems that rely heavily on the engine, thereby more effectively reducing fuel consumption. DM-p adopts a dual-engine four-wheel-drive platform architecture. Older models included not only dual-engine four-wheel-drive but also triple-engine four-wheel-drive. Under this dual-engine four-wheel-drive architecture, DM-p can achieve five driving modes: EV pure electric, HEV parallel, HEV series, HEV high-speed, and HEV energy recovery. Technologically, BYD has developed three major systems for DM-p: torque management, energy management, and thermal management. From the analysis of the above modes, it's clear that the smooth execution of each mode relies on torque management and energy management. Torque management: If the engine torque is sufficient for overtaking, the motor doesn't need to start, saving electricity. If the P4 motor is sufficient for EV pure electric driving, the front P0 motor doesn't need to start. Energy management: If the battery charge is insufficient, the vehicle will drive in series mode. As speed increases further, it switches to HEV high-speed mode. If the battery charge is sufficient, the higher-quality EV pure electric mode can be used, or the HEV parallel mode can be employed for rapid acceleration. BYD's hybrid technology is collectively referred to as "Dual Mode," abbreviated as DM. The evolution timeline of DM is: 2008, DM1 was introduced; 2013, DM2 was released; 2018, updated to DM3. Then came the current DM-p and DM-i. According to BYD's official statement, DM-p/i are not considered DM4 but rather technological derivatives of DM3.

18

3

Share

What vehicles can a Class C driver's license drive?

Here is an introduction to the vehicles that can be driven with a Class C driver's license: 1. C1 permitted vehicle types: (1) Permitted vehicle types: Small cars. (2) Permitted vehicles: Small and micro passenger cars, as well as light and micro trucks, and light, small, and micro special-purpose vehicles. Common sedans, SUVs, MPVs, minivans, and small trucks and agricultural vehicles that meet the above standards all fall within the scope of the C1 license. (3) Other permitted vehicle types: C2, C3, C4. 2. C2 permitted vehicle types: (1) Permitted vehicle types: Small automatic transmission cars. (2) Permitted vehicles: Small and micro automatic transmission passenger cars, as well as light and micro automatic transmission trucks. (3) Other permitted vehicle types: None.

15

5

Share

What is the equivalent of the Mercedes-Benz ML350 today?

How to tighten the handbrake on a Passat B5?

How to Turn on the Seat Ventilation in a Panamera?

Can FLAC files be played in the car?

Which company manufactures the Lynk & Co 03?

What are the differences between DM-p and DM-i?

What vehicles can a Class C driver's license drive?

How long after a new car is licensed can it be registered?

How to Make an Appointment for Traffic Violation Processing?

What is the method to unlock the Passat B5 audio system?

How to adjust the rearview mirrors of Oshan X7?