What is the equivalent of 80km in miles?

What is the engine model of the Highlander 2.7?

The Highlander 2.7 uses the 3AR-FE engine model, with a maximum horsepower of 188 HP, a maximum power of 138 KW, a maximum power speed of 5800 rpm, and a maximum torque of 252 Nm. The Highlander 2.7's engine is from the Toyota brand and is produced at the Changchun Toyota Engine Plant. For daily maintenance of the Highlander 2.7's engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD-SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions. For diesel engines, choose CB-CD grade diesel engine oil based on mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, leading to various engine problems. To avoid malfunctions, change the oil periodically according to usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may rupture the filter element or bypass the safety valve, carrying contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. In small amounts, it remains suspended in the oil; in large amounts, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Periodically use a radiator cleaner to flush the radiator. Removing rust and scale not only ensures the engine operates properly but also extends the overall lifespan of the radiator and engine.

16

3

Share

What is the Difference Between Car Wash Wax and Car Wash Soap?

Car wash soap and car wash wax both belong to the category of automotive cleaning agents. The main differences between them lie in their ingredients, cleaning effectiveness, and potential harm to the vehicle. Car wash wax is essentially an advanced version of car wash soap that incorporates natural wax components, offering both cleaning and maintenance benefits while causing less damage to the vehicle. Generally, car wash soap is more effective for heavily soiled vehicles, whereas car wash wax is better suited for lightly dirty cars. The primary differences between car wash soap and car wash wax are as follows: 1. Ingredient Difference: Car wash soap mainly consists of natural plant-derived surfactants, while car wash wax adds a certain proportion of natural wax to the basic formula of regular car wash soap. 2. Cleaning Effect Difference: Car wash soap provides average cleaning performance, primarily removing surface dust from the vehicle. In contrast, car wash wax focuses more on maintenance, offering targeted cleaning and care for different parts such as the paintwork, glass, and tires. 3. Potential Harm Difference: When using a high-pressure water gun for washing, car wash soap may potentially damage the paint because, although it offers some protection, it may not be comprehensive. On the other hand, car wash wax forms a protective film through its wax components, thereby safeguarding the paint and causing less harm to the vehicle. The glossy finish of the paint will also remain intact.

16

5

Share

What Causes Excessive White Smoke from the Exhaust Pipe?

Excessive white smoke from the exhaust pipe can be attributed to the following two scenarios: 1. Normal condition: Water vapor produced after gasoline combustion is normally discharged through the exhaust pipe. Due to low external ambient temperature, the water vapor condenses into small water droplets, becoming visible water vapor. 2. Fault condition: When some coolant enters the cylinder and is discharged with the exhaust gas, it appears as water vapor due to the high temperature. White smoke from the car's exhaust pipe in winter is quite common and generally caused by three reasons: 1. The main products of complete gasoline combustion are carbon dioxide and water, along with a small amount of pollutants. When the engine is just started, the exhaust pipe and the air inside are still at room temperature. Water vapor discharged from the cylinder quickly condenses into water mist upon encountering the cold exhaust pipe and air, which appears as white smoke when expelled. This is a normal phenomenon. 2. Water entering the cylinder turns into a large amount of water vapor, forming excessive white smoke. The most common case is a damaged cylinder head gasket. Since the cylinder block and head have water passages running through them, they must be tightly sealed to prevent water from leaking. In such cases, the cylinder head gasket needs to be replaced promptly. 3. Excessive water content in gasoline. Similar to coolant entering the cylinder, the fuel injector sprays not pure gasoline but a mixture containing some water. Since water cannot burn, it turns into a large amount of water vapor after being heated and is discharged from the vehicle, appearing as excessive white smoke.

15

4

Share

Is it considered overloading for a small car to carry 5 adults and 1 child?

The standard seating capacity of a 5-seater car is 5 people. Carrying 5 adults plus 1 child makes it 6 people, which constitutes overloading. According to China's traffic regulations, overloading is determined based on the number of individuals, and infants are also counted as individuals who should occupy a separate seat. If someone holds the infant and occupies the infant's seat, it is considered overloading. More information about overloading is as follows: 1. No matter how small the child is, they are still a life and should have a seat reserved for them. A 5-seater car carrying 4 adults and 1 infant would not be considered overloading. 2. Overloading is a serious traffic violation. The extra person can only squeeze into other seats, making seat belts insufficient. In the event of an emergency stop or other traffic accidents, without seat belts to secure passengers, their center of gravity becomes unstable, and they cannot react promptly to the accident, which can easily lead to injuries or fatalities. Therefore, regardless of the vehicle type, overloading is not allowed as it ensures passenger safety.

8

2

Share

How Many Digits Does an Engine Number Have?

Common engine numbers typically consist of 7-8 digits. The sequence and content of engine numbers may vary among different manufacturers. Generally, they include the engine model, production date, and a randomly assigned serial number given when the engine comes off the production line. Some may also include a place-of-origin code. Engine models are identification codes assigned by engine manufacturers in accordance with relevant regulations, corporate or industry practices, and engine attributes. These codes represent information such as the manufacturer, specifications, performance, features, technology, application, and production batch of the engine, including fuel type, number of cylinders, displacement, and static braking power. Engines installed in passenger cars or multi-purpose vehicles are required to display the professional manufacturer, model, and production number. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's lineup, and multiple engines can share the same model. The engine number, however, is the production serial number, which is unique to each individual engine. Composition of an Engine Number: Front Section: Includes product series codes, revision symbols, and regional or corporate codes. Manufacturers may choose appropriate letters as needed, subject to approval and filing by the industry standardization body. Middle Section: Consists of symbols for the number of cylinders, cylinder arrangement, stroke, and bore diameter. Rear Section: Comprises symbols for structural features and application characteristics. End Section: Distinguishing symbols. When differentiation is needed due to improvements or other reasons within the same product series, manufacturers may select appropriate symbols. The rear and end sections may be separated by a hyphen (-).

6

2

Share

How many hours does it take to change transmission fluid?

Changing transmission fluid takes about 1 hour. The following are the functions of changing transmission fluid: 1. Changing transmission fluid can make gear shifting smoother and more seamless, while also cleaning and lubricating the gear system, extending the lifespan of the transmission components, ensuring the normal operation of the transmission, and to some extent reducing fuel consumption. New transmission fluid contains fewer metal impurities, reducing transmission wear and thereby extending the overall lifespan of the transmission, preventing minor malfunctions. 2. The main functions of transmission fluid are lubrication and cooling. The transmission fluid dissipates heat through the transmission housing and transmission radiator. The fluid level in an automatic transmission must not be too high or too low, as this can lead to quality issues, causing premature transmission failures and abnormal control problems.

18

4

Share

What is the equivalent of 80km in miles?

What is the engine model of the Highlander 2.7?

What is the Difference Between Car Wash Wax and Car Wash Soap?

What Causes Excessive White Smoke from the Exhaust Pipe?

Is it considered overloading for a small car to carry 5 adults and 1 child?

How Many Digits Does an Engine Number Have?

How many hours does it take to change transmission fluid?

Why does the Corolla have high RPM but can't pick up speed?

What is the normal tire pressure for a warm car?

What does D1 D2 D3 D4 mean in a car?

How to Delete Recordings from a Dash Cam?