···
Log in / Register

What is the engine power of the Geely Vision X3?

6Answers
EmilioFitz
08/26/2025, 01:21:06 AM

Geely Vision X3 engine power The maximum power is 75KW. Introduction to Geely Vision X3: It is a sincere effort to enter the A0-class small SUV market. The Geely Vision X3 offers a total of 5 configuration models with 1.5L 5MT and 1.5L 4AT. The body dimensions are 4005/1760/1589mm in length, width, and height, with a wheelbase of 2480mm. The Vision X3 is equipped with the GLink intelligent vehicle system, supporting multiple functions such as intelligent navigation, entertainment audio and video, Carplay/Carlife mobile phone connectivity, and providing convenient services like voice interaction, traffic violation queries, and weather forecasts. Through the voice interaction function, owners can engage in human-vehicle interaction at any time, enabling intelligent companionship via voice control. Definition of engine power: The work done by the engine per unit time is called the engine's power. Corresponding to indicated work and effective work, it is called indicated power and effective power, respectively. The difference between these two is called mechanical loss power.

Was this review help?
109
Share
VanCole
09/08/2025, 03:25:19 AM

I've driven this car, the Geely Vision X3, with an engine power of about 80 kilowatts, which translates to 109 horsepower, paired with that 1.5-liter naturally aspirated engine. The numbers might not sound impressive, but it's genuinely sufficient for city commuting. The car accelerates quickly from a standstill, and when the traffic light turns green, a press on the throttle sends it forward without any sluggishness. Overtaking on the highway is manageable, and it handles small inclines without trouble. I appreciate its fuel efficiency, averaging around six to seven liters per 100 kilometers, which matches well with its power output, avoiding excessive fuel consumption. Daily driving is quite smooth, fitting its economical and affordable positioning—excessive power would just lead to higher fuel usage. If you're concerned about performance, accelerating to 100 km/h takes a bit over ten seconds, which is average, but it handles short trips or commutes with ease. Safety-wise, the stable power output means no unexpected stalling, giving me peace of mind, especially during foggy or rainy conditions when climbing hills. Overall, the power tuning is well-balanced, making it suitable for beginners or daily commuters.

Was this review help?
8
Share
Expand All
DelJeremiah
10/22/2025, 03:32:33 AM

As someone who frequently works on cars, let me talk about power. The Geely Vision X3 has a maximum power output of 80 kilowatts, which is commonly referred to as 109 horsepower, powered by a 1.5-liter engine. The power level directly affects acceleration and hill-climbing ability. If it's too low, the car will feel sluggish. This car performs decently in urban areas without noticeable lag, but I recommend checking the air filter and fuel system during maintenance, as power loss is often caused by excessive carbon buildup. In terms of fuel consumption, it's well-matched, averaging about 7 liters per 100 kilometers, so it won't waste your money on gas. When buying a car, don't just look at the power numbers—test drive it to feel the engine response. The Vision X3 has moderate but durable power, and it's unlikely to develop major issues even after several years of use. If you frequently drive on mountain roads, consider adding an engine guard for extra protection.

Was this review help?
14
Share
Expand All
KiaraRose
12/05/2025, 02:56:13 AM

I've been driving the Geely Vision X3 for quite some time now, with a power output of 80 kilowatts or 109 horsepower. It's quite easy to drive, with no trouble accelerating in the city, and it's stable when taking the family on the highway on weekends. The low fuel consumption is a highlight, averaging around six to eight liters, which saves money in the long run. The power figure is practical—no need to overthink it, as it's sufficient for daily use.

Was this review help?
2
Share
Expand All
VanAndrew
01/25/2026, 09:25:33 PM

Let's talk about engine power details. The Vision X3 is equipped with an engine that delivers 80 kilowatts of power, which converts to 109 horsepower. The 1.5L design is reasonable, with good fuel consumption control, averaging around 6-7 liters in city driving. The power output affects daily usage, such as acceleration speed and climbing ability. The car's tuning leans towards practicality, ensuring it doesn't struggle. Beginners are advised to pay attention to the power response, which can be felt during a test drive.

Was this review help?
9
Share
Expand All
Shannon
04/21/2026, 02:56:52 AM

I've been driving this compact car for years. The Geely Vision X3's engine delivers 80 kW (109 horsepower), which is sufficient for an economy car. Thinking back to the old cars with just a few dozen horsepower, this current power output makes climbing hills and overtaking smooth, with low fuel consumption at around 6 liters per 100 km, saving money in the long run. The engine runs quietly, starts without hesitation, and is ideal for family use or commuting. Maintenance is straightforward, and the power output remains stable without issues.

Was this review help?
8
Share
Expand All
More Q&A

What is the Difference Between Direct Injection and Electronic Fuel Injection in Cars?

The differences between direct injection and electronic fuel injection in cars are as follows: 1. Fuel injection method: Electronic fuel injection sprays fuel into the engine's intake manifold, while direct injection sprays fuel directly into the engine's cylinder. 2. Different installation positions of the fuel injector: In multi-point electronic fuel injection, the injector is installed at the end of the intake manifold, and the fuel spray is directed into the intake ports of each cylinder; the air-fuel mixture is formed outside the cylinder. In direct injection, the injector is installed on the cylinder head, spraying fuel directly into the cylinder; the air-fuel mixture is formed inside the cylinder. 3. Different fuel injection pressures: Multi-point electronic fuel injection operates at pressures between 2.5bar and 4bar, while direct injection operates at pressures between 40bar and 400bar. 4. Different fuel supply system compositions: Multi-point electronic fuel injection does not have a high-pressure fuel pump, whereas direct injection includes one. 5. Different fuel injection start angles and durations: Due to lower injection pressures, multi-point electronic fuel injection requires a longer injection time under heavy loads, and the next injection cycle may need to start after the intake valve closes. However, direct injection occurs after the intake valve opens and can take place during both the intake and compression strokes. Direct injection lowers the cylinder temperature at the moment of compression, aiding in the cooling of the piston and cylinder liner, thereby reducing the engine's tendency to knock. As a result, direct injection engines can achieve a higher compression ratio, leading to improved thermal efficiency.
115
Share

What is the fuel consumption of the CR-V 2.4L 4WD Luxury Edition?

CR-V 2.4L 4WD Luxury Edition has a fuel consumption of 11.2L/100KM. Below are the detailed specifications of the Honda CR-V: 1. Drivetrain: The Honda CR-V comes in two versions: a two-wheel-drive model and a four-wheel-drive model. The four-wheel-drive version features a front-engine, four-wheel-drive system with an on-demand all-wheel-drive configuration. 2. Powertrain: The Honda CR-V is equipped with two i-VTEC engines: a 2.0L and a 2.4L. The 2.0L engine delivers a maximum power of 114kW and a peak torque of 190N·m, while the 2.4L engine produces a maximum power of 140kW and a peak torque of 222N·m. 3. VTEC Technology: The Honda CR-V features VTEC engine technology, which stands for Variable Valve Timing and Lift Electronic Control System. Unlike conventional engines, VTEC engines differ in the number and control method of camshafts and rocker arms, featuring two distinct sets of valve drive cams for low-to-medium and high-speed operations, with automatic switching via electronic control. The VTEC system allows the engine to automatically adjust valve opening timing and lift based on driving conditions, thereby altering intake and exhaust volumes. This results in increased power output, reduced fuel consumption, and lower emissions.
108
Share

Will I Get Penalized for Driving with the Trunk Open While Carrying Items?

Driving with the trunk unclosed and in an open state is considered a traffic violation. Typically, traffic cameras do not capture this type of violation. However, if spotted by traffic police, the vehicle may be stopped, and a ticket will be issued for violating road traffic safety laws and regulations regarding road usage. Below are some precautions regarding the trunk: 1. Avoid storing flammable and explosive items: As the trunk is an enclosed space, temperatures can rise rapidly. Storing lighters, hairspray, or other flammable and explosive items in the trunk, especially during summer heat and long-distance travel, can lead to explosions with unimaginable consequences. 2. Avoid storing valuables: Keeping valuables, premium cigarettes, or fine liquor in the trunk is highly unsafe. Thieves are cunning, and it is absolutely inadvisable to leave valuables in the car trunk.
110
Share

Is Half Engagement Stepping on the Clutch Halfway?

Half engagement is stepping on the clutch halfway. Here is an introduction to half engagement: 1. Introduction: Clutch half engagement refers to the unstable connection state of the clutch, where the driver presses the clutch pedal, gradually reducing the pressure of the clutch pressure plate, causing the driving plate and the driven plate to be in a state of both rotating and slipping. During the field driving test, drivers who are not yet proficient in operation and cannot complete the required actions within the specified time often use half engagement to reduce the vehicle speed, thereby extending the operation time. However, the rules for off-field driving tests do not allow the use of half engagement. 2. Half Engagement: Half engagement is when the clutch is between disengaged and engaged, and the transmission system is between connected and disconnected, providing a flexible power source. It is frequently used in complex road conditions, as well as during starting, turning, and short-distance following. When the clutch is in the half engagement state, the friction between the pressure plate and the friction disc is minimal.
103
Share

How to Turn on the Cold Air in the 7th Generation Accord?

The cold air in the 7th generation Accord can be turned on by pressing the A/C button. AUTO means to turn on, press it once, and the fan will start working. Here are more related introductions: 1. Air Conditioning Cooling Principle: After the air conditioner is powered on, the low-pressure steam of the refrigerant in the refrigeration system is sucked in by the compressor and compressed into high-pressure steam, which is then discharged to the condenser. At the same time, the outdoor air sucked in by the axial fan flows through the condenser, taking away the heat released by the refrigerant, causing the high-pressure refrigerant steam to condense into high-pressure liquid. It exchanges heat with the outdoor air to become medium-temperature and medium-pressure refrigerant liquid, which then enters the evaporator after being throttled and depressurized by the capillary tube, evaporating under the corresponding low pressure and absorbing the surrounding heat. 2. Air Conditioning Buttons: The left and right sides respectively adjust the cold and hot air for the driver and passenger. Blue represents cold air, and red represents hot air. Adjust both sides to the lowest blue area, which means pressing the blue button to the lowest state, and then press the A/C air conditioning switch button once.
109
Share

What Should You Ask the Dealer for When Buying a New Car?

When purchasing a new car, you should request complimentary items from the dealer such as window tinting, floor mats, small gifts like cakes and perfumes, full-coverage floor mats, and reflective vests for the vehicle. Below is an introduction to related automotive content: 1. Determining Factors: The quality of a vehicle's handling is primarily determined by three factors: power, suspension, and steering system. 2. Detailed Introduction: Power is the foundation of handling. Only with strong and smooth power output can a vehicle qualify to discuss handling; Suspension is the key to handling. Generally speaking, for two cars with similar power, the difference in handling depends on the suspension. A solid and resilient suspension ensures stable and reliable handling.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.