What is the engine oil specification in the Hyundai ix35 maintenance manual?

What Causes Jerking When Accelerating at Low Speeds in a New Car?

The reasons for jerking when accelerating at low speeds in a new car include excessive carbon buildup in the throttle body, poor fuel quality, and differences in vehicle types. Excessive carbon buildup in the throttle body: Many malfunctions are caused by carbon buildup, and some vehicles may experience jerking due to carbon deposits. It is recommended to regularly clean carbon deposits. Poor fuel quality: Poor or mismatched fuel quality can lead to incomplete combustion. Different vehicle types: In manual transmission vehicles, jerking can occur when accelerating or decelerating while the clutch is partially engaged. The deeper the throttle is pressed, the more pronounced the jerking becomes. In automatic transmission vehicles, there may be slight jerking when accelerating and upshifting, and it becomes more noticeable when forcefully downshifting and then upshifting with a heavy throttle.

13

4

Share

Where Should the Right Foot Be Placed When Shifting Gears?

When shifting gears, place your right foot above the brake pedal. Gear Shifting: Refers to the transmission, which is used to change the torque and speed of the engine crankshaft to meet the varying needs of driving wheel traction and vehicle speed under different driving conditions such as starting, accelerating, driving, and overcoming various road obstacles. Difference Between Manual and Automatic Transmission: Automatic transmission does not require the driver to manually shift gears. The vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Common automatic transmission gears include P, R, N, D, 3, 2, and 1. Manual transmission requires the driver to manually move the gear lever to change the gear engagement inside the transmission, altering the gear ratio to achieve speed changes. Manual transmission gears typically include 1, 2, 3, 4, 5, N, and R.

5

4

Share

What Certifications Can Be Obtained in New Energy Vehicle Technology?

New energy vehicles differ from traditional vehicles primarily in their "three electric" core technologies, which include electric drive, battery, and electric control. Currently, there is no specific "new energy vehicle certification," but one can obtain certifications such as Low Voltage Electrician Certification, Automotive Repair Technician Certification, Automotive Repair Electrician Certification, and Automotive Repair Sheet Metal Worker Certification. New Energy Vehicles: New energy vehicles refer to vehicles that use unconventional vehicle fuels as power sources (or use conventional vehicle fuels with new types of onboard power devices), integrating advanced technologies in vehicle power control and drive systems, resulting in vehicles with advanced technical principles, new technologies, and innovative structures. Classification of New Energy Vehicles: Hybrid Electric Vehicles (HEV), Battery Electric Vehicles (BEV, including solar-powered vehicles), Fuel Cell Electric Vehicles (FCEV), and other new energy vehicles (such as those using supercapacitors, flywheels, and other high-efficiency energy storage devices). Unconventional vehicle fuels refer to fuels other than gasoline and diesel.

13

5

Share

Can New Energy Pure Electric Vehicles Drive on Highways?

New energy pure electric vehicles can drive on highways. Introduction to Pure Electric Vehicles: New energy electric vehicles, the composition of new energy electric vehicles includes electric drive and control systems, mechanical systems such as drive force transmission, and working devices to complete set tasks. The electric drive and control system is the core of electric vehicles and also the biggest difference from internal combustion engine vehicles. The electric drive and control system consists of drive motors, power sources, and speed control devices for the motors. Other devices of electric vehicles are basically the same as those of internal combustion engine vehicles. Conditions for Vehicles to Drive on Highways: Vehicles with a maximum speed below 70 kilometers per hour, except for two-wheeled vehicles. According to the special provisions for highways in the Road Traffic Safety Law, pedestrians, non-motor vehicles, tractors, wheeled special-purpose motor vehicles, articulated buses, full trailers, and other motor vehicles with a design maximum speed below 70 kilometers per hour are not allowed to enter highways.

14

3

Share

How to Replace Coolant for the New Excelle?

The steps to replace the coolant for the New Excelle are as follows: 1. First, open the engine hood of the vehicle, and you can see the coolant reservoir in the upper right corner. 2. Open the coolant drain plug at the bottom of the radiator to drain the old coolant, then reinsert the plug after the coolant is completely drained. 3. Then, add the new coolant of the same type, and make sure to tighten the coolant cap after filling. Below is a brief introduction to coolant: (1) The full name of coolant should be antifreeze coolant, meaning it has antifreeze properties. (2) Coolant prevents the cooling liquid from freezing and cracking the radiator or damaging the engine block or cylinder head during cold winter parking. Many people think coolant is only used in winter, but in fact, it should be used all year round. (3) Coolant is a special additive-containing liquid primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and resisting scale and corrosion throughout the year.

1

5

Share

What Causes Excessive Water from a Car's Exhaust Pipe?

Water dripping from the exhaust pipe indicates that your fuel supply system is in excellent condition. Here are the three necessary conditions for water dripping from the exhaust pipe: 1. The air-fuel mixture ratio is correct. 2. The engine compression pressure is high. 3. The exhaust temperature is low. Below is detailed information about water dripping from the exhaust pipe: 1. Whether it's fuel injection or carburetor supply, the mixed air-fuel ratio is just right (indicating fuel efficiency). High engine compression pressure signifies good engine condition, with no signs of cylinder wear. 2. If the engine shows slight signs of burning oil, the cylinder pressure will decrease, leading to incomplete combustion. Incomplete combustion prevents water dripping, as the exhaust temperature won't be low. 3. A low exhaust temperature indicates correct ignition timing. The combustion gases are concentrated within the cylinder, with little or none escaping into the exhaust pipe (indicating strong engine horsepower output). For water to drip from the exhaust pipe, the engine itself must meet these conditions.

3

1

Share

What is the engine oil specification in the Hyundai ix35 maintenance manual?

What Causes Jerking When Accelerating at Low Speeds in a New Car?

Where Should the Right Foot Be Placed When Shifting Gears?

What Certifications Can Be Obtained in New Energy Vehicle Technology?

Can New Energy Pure Electric Vehicles Drive on Highways?

How to Replace Coolant for the New Excelle?

What Causes Excessive Water from a Car's Exhaust Pipe?

How to install navigation in the Bestune X40?

How Often Should Sunroof Grease Be Applied?

What are the functions of the interior buttons in the 2019 Bora?

Which Rusts Faster, High Ground Clearance or Low Ground Clearance?