What is the engine oil specification for Toyota Camry?

[HarperRose]

Toyota Camry uses engine oil specifications 0W20 and 5W20. The steps for oil change are: 1. Lift the vehicle, remove the undercover, and place a container under the drain plug; 2. Loosen the drain plug, use an air gun to blow for two minutes at the oil filler port, tighten the drain plug after complete drainage and wipe with tissue to check for leaks; 3. Reinstall the undercover, lower the vehicle, and add new oil using a funnel aligned with the filler port. Taking the 2019 Toyota Camry as an example, its body dimensions are: length 4885mm, width 1840mm, height 1455mm, wheelbase 2825mm, fuel tank capacity 60L, and curb weight 1530kg.

[SanSerenity]

I've been driving a Toyota Camry for several years, from the 2018 model to now, always using 0W-20 full synthetic oil. The manual clearly states this is the manufacturer-recommended type. Choosing the right oil is crucial for engine health—0W-20 ensures faster cold starts in winter, quieter engine operation, and improved fuel efficiency, with my average fuel consumption around 32 mpg. I change the oil every 8,000 miles to avoid oil degradation, which can lead to carbon buildup or wear. Using the wrong type, like 5W-40, makes the oil too thick, increasing engine strain, sluggish acceleration, and higher fuel consumption. I recommend sticking to synthetic oil over mineral oil to save on long-term costs, and regular maintenance can prevent major repairs. Always check your model year's manual for confirmation—never rely on guesswork.

[MacKira]

Oil viscosity is crucial. The Toyota Camry typically recommends 0W-20 full synthetic oil because it flows well at low temperatures for smooth starts and maintains thin viscosity at high temperatures to reduce friction and improve efficiency. From technical tests, synthetic oil molecules are stable and durable, allowing oil change intervals to be extended up to 10,000 miles while protecting engine components like pistons and camshafts. Using 5W-30 may be feasible in some regions, but the new Camry is designed to perform optimally with 0W-20. Incorrectly using higher viscosity oils like 10W-30 may cause oil pump overload or trigger warning lights. API-certified synthetic oil is the preferred choice, and regular oil changes to maintain cleanliness significantly impact long-term driving performance. Verify that your VIN matches the model, and avoid experimenting with non-standard oil products.

[DiEdward]

As a daily driver of the Camry, I simply follow the manual's recommendation for oil selection—0W-20 synthetic oil. The repair shop recommends it every time I get an oil change, and the car runs smoothly with good fuel efficiency, saving me money with lower fuel consumption. I service it every six months or 7,500 miles to avoid potential issues from delays. Remember to use genuine oil and not switch types arbitrarily, or the engine might make noise or trigger a warning light. Keeping the oil fresh ensures the car runs well—no need to overcomplicate it.