···
Log in / Register

What is the engine oil specification for the Changan CS55PLUS Blue Whale Edition?

4 Answers
StElijah
07/29/25 11:20am

The Blue Whale 1.4T engine uses 0W-20 engine oil. Summer oil specifications: 20, 30, 40, 50 - the higher the number, the greater the viscosity and the higher the applicable maximum temperature; Winter oil specifications: 0W, 5W, 10W, 15W, 20W, 25W - the letter W stands for Winter, and the smaller the number before W, the lower the low-temperature viscosity, the better the low-temperature fluidity, and the lower the applicable minimum temperature; All-season oil specifications: 5W-20, 5W-30, 5W-40, 5W-50, 10W-20, 10W-30, 10W-40, 10W-50, 15W-20, 15W-30, 15W-40, 15W-50, 20W-20, 20W-30, 20W-40, 20W-50 - the smaller the winter number, the higher the viscosity represented by the summer number, and the wider the applicable temperature range.

Was this review help?
7
4
Share
JosephMarie
08/13/25 6:34pm

I remember when maintaining the Changan CS55PLUS Blue Whale edition, the official recommendation is to use 5W-30 full synthetic oil, preferably the SAE standard type, because the engine is turbocharged. 5W-30 provides good fluidity and protection, especially performing stably at high speeds in high-temperature environments. It's advisable to choose SN or SP grade oil, with reliable brands like Castrol Edge or Mobil 1. I've used them myself, and the engine runs quieter with slightly improved fuel efficiency. Don’t forget to change the oil regularly—generally every 5,000 kilometers or six months, depending on the vehicle’s reminder. Delaying it excessively may lead to engine wear or increased carbon buildup. Before driving, always check the dipstick to ensure the oil level is normal. This habit can prevent minor issues from turning into major faults. Get into the routine of checking the owner’s manual, and avoid experimenting with oil that has excessively high viscosity, as it could affect power output.

Was this review help?
11
5
Share
Expand All
Marty
10/08/25 3:49am

I've been driving the Changan CS55PLUS Blue Whale Edition for a while now. Based on practical experience, 5W-30 synthetic oil is the most suitable choice. The engine manual recommends this grade - its viscosity isn't too high, providing smooth protection for turbo components while preventing excessive friction during cold starts. After several oil changes myself, I've noticed smoother acceleration without significant fuel consumption increase. Never opt for cheap mineral oil during changes - though synthetic oil costs more, its durability is superior. Typically requires replacement every 8,000 km or annually, adjusted according to urban driving habits. During routine maintenance, technicians always emphasize oil quality importance. I recommend authorized service centers to avoid counterfeit products that could damage engine internals - never compromise quality to save money.

Was this review help?
4
2
Share
Expand All
EliDella
11/21/25 5:08am

As someone who frequently handles vehicle maintenance, I recommend using SAE-standard 5W-30 synthetic oil for the Changan CS55PLUS Blue Whale Edition. The reason lies in the engine type - the lower viscosity of 5W-30 provides better fluidity during cold starts, offering superior protection for the turbocharger. SN-grade certified oil effectively reduces deposits and enhances performance. Remember to replace the oil filter every 5,000 kilometers, with the overall maintenance cycle kept within six months. Proper oil maintenance will significantly extend your vehicle's lifespan.

Was this review help?
16
2
Share
Expand All
More Forum Discussions

Why does the car heater suddenly stop blowing hot air?

During repairs, it is necessary to first determine the cause before proceeding with the corresponding repairs. The reasons for the car heater not blowing hot air are as follows: Thermostat stuck open or opening too early: This causes the cooling system to enter the major circulation prematurely. When the external temperature is very low, especially when the car is moving, the cold air quickly cools the antifreeze, preventing the engine water temperature from rising, and the heater will not blow hot air. Water pump impeller damage or slippage: This results in insufficient flow through the heater core, preventing the heat from rising. Air lock in the engine cooling system: An air lock causes poor circulation in the cooling system, leading to high water temperature and the heater not blowing hot air. If there is always air in the cooling system, it is likely due to a damaged cylinder head gasket allowing air into the cooling system. If the inlet pipe of the heater core is very hot while the outlet pipe is relatively cold, this indicates a blockage in the heater core, and the heater core should be replaced.
4
4
Share

What is the reason for increased fuel consumption after replacing the camshaft sensor?

Replacing the camshaft sensor may lead to increased fuel consumption due to potential changes in the ignition timing. Camshaft Sensor: The camshaft position sensor is a sensing device, also known as a synchronization signal sensor. It serves as a cylinder identification and positioning device, providing the ECU with camshaft position signals, which are the primary control signals for ignition. The function of the camshaft position sensor is to collect the position signals of the camshaft and input them into the ECU, enabling the ECU to identify the top dead center of cylinder compression. This allows for sequential fuel injection control, ignition timing control, and knock control. Ignition Advance Angle: The angle through which the crankshaft turns from the start of ignition until the piston reaches the top dead center.
8
0
Share

What Causes the Average Fuel Consumption to Keep Fluctuating?

Average fuel consumption may fluctuate due to significant changes in external air temperature or unstable vehicle coolant temperature. Factors affecting average fuel consumption: Malfunctions in the car's ignition system or incomplete fuel combustion can both impact the vehicle's average fuel consumption. If the air-fuel ratio is inappropriate, meaning the intake air volume or fuel injection amount is unstable, the average fuel consumption will fluctuate. In such cases, it is necessary to promptly clean carbon deposits and perform regular maintenance. Methods to reduce average fuel consumption: Drive smoothly, avoiding sudden braking and acceleration. Perform regular vehicle maintenance and reduce onboard weight. Continuously monitor the tire pressure to keep it within the normal range.
18
4
Share

What is the principle of paintless dent repair?

Automotive paintless dent repair preserves the original car paint surface. Skilled and experienced professional technicians use external suction and internal pushing techniques along with metal panel polishing. Principles of paintless dent repair: Utilizing principles of mechanics, thermodynamics, and optics to repair dents, effectively avoiding traditional metal panel polishing and painting processes. Challenges of paintless dent repair: The main difficulty lies in the metal panel leveling technology and maintaining the original panel thickness without thinning. This technique achieves more refined results than traditional metal panel leveling, eliminating the need for putty application and allowing direct painting.
6
2
Share

What is AWD?

AWD on a vehicle refers to full-time four-wheel drive, where the engine distributes power evenly to all four wheels through the drivetrain. Below is a detailed introduction to the four-wheel drive system modes: H4F Full-Time Four-Wheel Drive: H4F is the default four-wheel drive mode for the Prado, used during everyday city driving. H4L High-Speed Four-Wheel Drive: In high-speed four-wheel drive mode, both the front and rear differentials are locked, causing all four wheels to rotate at the same speed. This prevents situations where lifted wheels spin rapidly while stuck wheels remain stationary. When in H4L mode, it is best not to exceed a speed of 80 km/h. L4L Low-Speed Four-Wheel Drive: Low-speed four-wheel drive is typically used in slippery conditions such as mud or swamps. It reduces speed through a gear mechanism to increase torque. The Prado's low-speed four-wheel drive can amplify the torque by 2.6 times compared to high-speed four-wheel drive, providing greater power to escape difficult situations, though the vehicle speed will be slower.
4
2
Share

Can Vehicle Purchase Tax Be Paid on Saturdays and Sundays?

Generally, vehicle purchase tax cannot be paid on weekends in most locations; it is usually only payable during normal working days from Monday to Friday. (There may be a few exceptions where vehicle purchase tax can be paid on weekends). Vehicle Purchase Tax Rate: The tax rate is 10%. Typically, it is calculated based on the vehicle purchase invoice price (or the minimum taxable price determined by the State Taxation Administration), after deducting the value-added tax, and then applying the 10% tax rate. Passenger Vehicles Eligible for Tax Reduction: These refer to vehicles designed and technically intended mainly for transporting passengers and their personal belongings and/or temporary items, with no more than nine seats including the driver's seat, as well as new energy vehicles.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.