What is the engine oil specification for the Baojun 510?

What Happens When Tire Pressure Is Too High?

Tire pressure that is too high can affect vehicle performance, reduce tire lifespan, and compromise driving safety. Excessive tire pressure increases tire rigidity, reduces deformation and contact area with the ground, which can accelerate wear on the central part of the tire tread and shorten the tire's service life. Overinflated tires become excessively hard, diminishing their puncture resistance and making them more prone to blowouts when encountering sharp objects. If a vehicle's tire pressure is too high, it is necessary to release some air. This can be done by unscrewing the tire valve cap, locating the valve core, and gently pressing it. While monitoring the tire pressure gauge, press the air release valve until the pressure returns to the normal range.

10

4

Share

What causes water leakage in the Buick GL8 Landusen cabin?

The reasons for water leakage in the Buick GL8 Landusen cabin are: 1. There is an independent compartment between the engine compartment and the windshield, with drainage holes at the bottom that may be blocked by debris such as leaves; 2. There are rubber plugs at the lower part of the body, which may have aged or been damaged; 3. If additional equipment like alarms are installed, poor sealing of the wiring holes can also cause water ingress. The Buick GL8 Landusen is an MPV launched by SAIC-GM Buick, with dimensions of 5219mm in length, 1878mm in width, and 1799mm in height, a wheelbase of 3088mm, equipped with a 2.0T turbocharged engine delivering a maximum power of 174kw, paired with a 9-speed automatic transmission.

3

0

Share

How to Check the Vehicle's Emission Standard Level?

Methods to check the vehicle's emission standard level: 1. Look at the vehicle's environmental protection label, which usually has a clear marking on the back; 2. You can visit professional query websites for verification; 3. You can refer to the vehicle's factory certificate of compliance, but generally, this document is kept at the vehicle management office, so it's advisable to make a copy for personal use; 4. Alternatively, you can personally take the vehicle's registration certificate to the environmental protection window at the vehicle management office for inquiry. Vehicle emission standards refer to the national regulations established to limit the emission of harmful gases such as CO (carbon monoxide), HC plus NOx (hydrocarbons and nitrogen oxides), and PM (particulates, soot) from vehicle exhaust.

15

2

Share

What grade of engine oil is used for the Changan CS15?

The engine oil grade used for the Changan CS15 is SL 3.5L 5W-30 Great Wall brand mineral oil, or SN-grade 5W-30 Shell Helix mineral oil. You can also check the vehicle's oil change standards in the owner's manual. The Changan CS15 is a compact SUV under the Changan Automobile brand, with body dimensions of 4135mm in length, 1740mm in width, and 1630mm in height, and a wheelbase of 2520mm. The Changan CS15 is equipped with an EA15 high-efficiency engine independently developed by Changan Automobile, with a maximum power output of 78.5kW, a maximum speed of 5500rpm, and a maximum torque of 145Nm.

8

2

Share

Why is the engine coolant level too low?

The main reasons for low engine coolant level include: malfunction of the water temperature gauge and its circuit, damage to the water temperature sensor, thermostat valve stuck open, failure of the louver to close the temperature control switch, fan motor circuit malfunction causing the fan to run continuously, or failure of the silicone oil clutch in vehicles equipped with a silicone oil clutch fan. The cooling system operates by circulating coolant through a water pump to carry heat away from the engine, achieving a cooling effect. If the engine coolant level is too low, it will result in the inability to circulate and dissipate heat, potentially leading to engine damage. Coolant is an essential part of a car's engine, circulating within the engine cooling system to remove excess heat generated during engine operation, ensuring the engine operates at the correct working temperature.

2

0

Share

How to Turn Off the Anti-Skid Function in Focus?

Method to turn off the anti-skid function in Focus: Disable it in the settings of the trip computer menu. Click on the "Driver Assistance" option in the menu settings and turn off the anti-skid function. Alternatively, you can use the buttons on the steering wheel to access the vehicle settings and disable the traction control system. The anti-skid system in cars includes derivatives such as the Electronic Stability Program (ESP), Traction Control System (TCS), Anti-Slip Regulation (ASR), and Vehicle Dynamic Control (VDC). The Focus is a compact car under the Ford brand, equipped with three types of engines: a 1.0-liter turbocharged engine, a 1.5-liter turbocharged engine, and a 1.5-liter naturally aspirated engine.

11

4

Share

What is the engine oil specification for the Baojun 510?

What Happens When Tire Pressure Is Too High?

What causes water leakage in the Buick GL8 Landusen cabin?

How to Check the Vehicle's Emission Standard Level?

What grade of engine oil is used for the Changan CS15?

Why is the engine coolant level too low?

How to Turn Off the Anti-Skid Function in Focus?

What are the precautions for running a new car at high speed?

How to Deal with Fog Inside the Car When Driving in Autumn?

Where is the car's evaporator located?

Can You Still Drive After Losing 12 Points?