What is the engine oil capacity of the BMW 1 Series?
3 Answers
The engine oil capacity of the BMW 1 Series is approximately 4L. Method to check the oil level: After adding the engine oil, start the vehicle and then turn it off. Wait for 3 minutes before checking the oil level. This is because when changing the engine oil, the oil filter also needs to be replaced. The new oil filter initially contains no oil, and after starting the vehicle, oil will flow into the filter. Waiting for 3 minutes allows the oil to settle into the oil pan, ensuring a more accurate reading. It is important not to check the oil level on a slope, as the tilt of the vehicle will cause the oil in the oil pan to tilt as well, leading to an inaccurate measurement. The oil dipstick must be pulled out and held perpendicular to the ground for the most accurate reading. Normal oil level: The oil dipstick has two marks: a maximum and a minimum. The normal oil level should not be above the maximum mark or below the minimum mark. The oil level should be between these two marks for it to be considered normal.
I've been driving my own BMW 1 Series for three years now. The oil capacity really depends on the specific model. For example, the F20 series with a 1.6-liter gasoline engine usually takes about 4.25 liters, while the 2.0-liter diesel might require up to 5.5 liters. Last time I changed the oil, I checked the dipstick when the engine was cold and only needed to add 4.3 liters to reach the midpoint. This is because too much oil can burden the engine, while too little may cause cylinder burning or overheating. I typically check it every 7,000 kilometers, and using fully synthetic oil provides better engine protection and extends the car's lifespan. If you're unsure, just refer to the owner's manual or visit a maintenance shop to have a technician measure it for you – simple and hassle-free. Proper car maintenance ensures smooth driving, saving money and keeping you safe.
As a young car enthusiast who enjoys DIY maintenance, I've researched the oil capacity of the BMW 1 Series, which actually varies depending on the model year. For example, the 2019 1.5T engine requires approximately 4.8 liters, while the 2020 model may need around 4.5 liters. When changing the oil myself, I always drain the old oil completely to ensure I don't overfill with new oil, as excess oil can cause leaks or accelerated wear. Using the correct oil quantity makes the engine run quieter and improves fuel efficiency. I often advise friends to check specific data in the official app or call the manufacturer's hotline for clarification. Regular oil level checks prevent minor issues from escalating, giving me peace of mind on the road.
