What is the engine oil capacity of the 10th-generation Accord?

1 Answers
HavenAnn
07/29/25 10:12am
The engine oil capacity of the 10th-generation Accord is approximately 4 liters. The functions of engine oil are: 1. Reducing friction and high temperatures; 2. Cooling and lowering temperature; 3. Cleaning and purifying; 4. Damping and cushioning; 5. Preventing rust and corrosion. Taking the 2018 Accord as an example, its body dimensions are: length 4893 mm, width 1862 mm, height 1449 mm, with a wheelbase of 2830 mm. The 2018 Accord is equipped with a 1.5T turbocharged engine, with a maximum power of 143 kW at 5500 rpm, and a maximum torque of 260 Nm between 1600 to 5000 rpm. It features a MacPherson independent front suspension and a multi-link independent rear suspension.
Was this review help?
14
1
Share
More Forum Discussions

How to Activate Cruise Control in CRV?

Steps to activate cruise control in CRV: 1. Press the brake pedal of the Honda CRV, press the one-touch start button of the Honda CRV, and then press the CRUISE button on the steering wheel. 2. When the vehicle speed reaches above 40km/h, press the –/SET button to start cruising. 3. To set the desired speed, remove your foot from the accelerator pedal and press the RES/+/SET/- button downward, then release to complete the setting and start cruise control. To adjust the speed, use the RES/+/SET/- switch on the steering wheel to increase or decrease the speed. To cancel cruise control, press the CANCEL button or the CRUISE button, or step on the brake pedal. At this point, the CRUISE CONTROL indicator light will turn off.
7
1
Share

Does the Bluebird come with a sunroof?

The Bluebird comes with a sunroof. Below is an introduction to the Bluebird: 1. The Bluebird is a sedan series launched by Nissan in 1959. It features a bold exterior design, high-end configurations, and excellent cost-effectiveness. The official guide price ranges from 105,900 to 146,400 yuan. 2. In terms of appearance, the Bluebird adopts a fastback design with a short and towering rear, presenting a diving posture. The A, B, and C pillars of the Bluebird are all black, showcasing the popular floating roof visual effect. 3. For safety configurations, the vehicle has mainly upgraded its active safety system. This Nissan i-SAFETY active safety system includes a pre-collision braking system, lane departure warning system, blind-spot monitoring system, and rear cross-traffic alert system. 4. In terms of power, the Bluebird is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 93kW (126PS), paired with either a 5-speed manual or CVT continuously variable transmission. The manual transmission model has a fuel consumption of 6L/100km, while the CVT models offer three fuel consumption figures of 5.3L/100km, 5.6L/100km, and 5.7L/100km depending on the configuration.
12
3
Share

How to Replace the Cabin Air Filter in a CS55?

Method for replacing the cabin air filter in a CS55: The cabin air filter of the CS55 is located in the engine compartment in front of the front passenger seat. First, remove the front clips gently to avoid damage, then take out the internal soundproofing cotton. Reach inside to remove the internal partition, and then you can take out the cabin air filter. Install the new filter in the correct direction. The CS55 is an SUV model under Changan, with a length, width, and height of 4500mm, 1855mm, and 1690mm respectively, and a wheelbase of 2650mm. In terms of product design, the CS55 features vibrant red and starry blue as the main body colors, along with high-tech configurations, catering to the needs of young consumers.
10
4
Share

What are the methods to prevent car tire blowouts?

Methods to prevent car tire blowouts include: 1. Reduce summer tire pressure by about 10%. High summer temperatures and increased road surface heat can easily raise tire pressure. Excessive tire pressure can accelerate tire wear and lead to blowouts. 2. Avoid sudden acceleration and hard braking as much as possible. 3. Ensure all four wheels are parked on level ground, avoiding uneven surfaces. During hot weather, it's advisable to stop the car every two hours on highways, but do not splash water on the tires to prevent deformation. Also, allow the tires to rest and cool down during stops. When cooling and reducing tire pressure, let them cool naturally. Avoid pouring cold water on the tires, as this can cause cracks and shorten the tire's lifespan.
8
5
Share

How to Set Cruise Control on the RAV4?

RAV4 Cruise Control Setup Method: 1. Press RES to resume cruise control, and press CANCEL to deactivate it; 2. The cruise control function can only be activated after setting the speed via the SET button—it remains inactive without speed configuration; 3. Buttons for adjusting cruise control speed: the plus sign increases speed, while the minus sign decreases it; 4. The following distance for cruise control is adjusted using the distance control button, followed by the plus and minus buttons to set the gap; 5. Lane Keeping Assist serves as an auxiliary system for cruise control, alerting the driver via steering wheel vibrations or alarms when the vehicle approaches lane markings. The RAV4 is Toyota's compact multi-purpose SUV base model, available in 3-door and 5-door variants. Its air intake and front/rear bumpers emphasize an off-road aesthetic, with enlarged headlights and prominent Toyota branding. An 80mm longer wheelbase, combined with increased cabin height and width, ensures spacious and comfortable seating. The interior design is highly flexible, allowing MPV-like adjustments—rear seats can slide backward, fold, or flip.
4
1
Share

What Causes the Steering Wheel to Make Strange Noises?

The reasons for strange noises inside the car steering wheel: 1. The steering column lacks lubrication, resulting in high friction; 2. Check if the power steering fluid is low; 3. Inspect the universal joint for any issues; 4. The rubber bushings of the suspension stabilizer bar links may have aged and hardened; 5. The thrust bearing may be damaged. The steering wheel is a wheel-shaped device used to control the direction of cars, ships, and airplanes. It is generally connected to the steering shaft via splines. Its function is to convert the force applied by the driver on the edge of the steering wheel into torque, which is then transmitted to the steering shaft. It mainly consists of a frame, foam, and mounting clips or screw holes corresponding to the driver's airbag (DAB).
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.