···
Log in / Register

What is the engine of the Buick Excelle?

4 Answers
Emersyn
09/03/25 5:45am
Buick Excelle is equipped with a 1.3T turbocharged engine, which has a maximum power of 120 kW at 5500 rpm and a maximum torque of 230 Nm between 1800 and 4400 rpm. It is paired with a 6-speed automatic transmission. The Buick Excelle is a compact 4-door, 5-seater sedan with body dimensions of 4609mm in length, 1798mm in width, and 1486mm in height, with a wheelbase of 2640mm. The fuel tank capacity is 44 liters, and it features front-wheel drive. The front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a multi-link independent suspension.
Was this review help?
3
3
Share
KateFitz
09/15/25 7:16am
As a Buick owner, I drive the Excelle. Its engine is quite common, with a 1.5L naturally aspirated version that delivers moderate power and smooth acceleration, making it ideal for daily commutes. My daily 100-kilometer commute averages around 7L/100km, which is quite fuel-efficient. Engine noise is well-controlled at low speeds, though it becomes noticeable during hard acceleration. Another option is the 1.3L three-cylinder turbocharged engine, which offers stronger power and a more pronounced push-back sensation, but the three-cylinder design results in slight vibrations at idle, something to consider for long-term use. Personally, I recommend the 1.5L version for its reliability—GM's engine technology is mature, and maintenance is straightforward. Regular oil changes are crucial to prevent carbon buildup. In city driving, the Excelle's engine responds quickly, making it hassle-free in traffic. Compared to the Corolla's engine, the Excelle's tuning is sportier—definitely worth a test drive. Overall, it's a cost-effective choice that can easily last five to six years without major issues.
Was this review help?
16
0
Share
Expand All
LeArianna
10/29/25 7:53am
I often rent cars and drive various commuter vehicles. The Buick Excelle's engine offers good overall performance and excellent fuel efficiency. The main recommendation is the 1.5L four-cylinder engine, which provides linear power output and remains stable during highway cruising. In terms of fuel consumption, it stays below 8L for city commuting and drops to around 6L on highways, making it quite cost-effective. Maintenance costs are low, with routine servicing costing just a few hundred yuan. However, the three-cylinder turbo version is slightly noisier, so pay attention to fuel quality. Key points: The engine features lightweight material design, reducing overall vehicle weight and indirectly improving fuel efficiency. In terms of market reputation, the Excelle's engine reliability is rarely criticized, making it suitable for budget-conscious young people. It's also common to find used models, just check the maintenance records. Daily driving is effortless, and the power is sufficient for family trips, holding its own against other joint-venture cars in the same class.
Was this review help?
19
0
Share
Expand All
OZachary
12/12/25 8:07am
As an automotive technology enthusiast, the engine design of the Buick Excelle is quite fascinating. For instance, the 1.3T three-cylinder version utilizes Turbo charging to enhance efficiency, reduce emissions, and comply with the China VI standard; it also employs an internal balance shaft to address vibration issues. Compared to older models, the new engine is more compact, delivers 20% more power, but requires some adaptation to the vibration sensation at idle. General Motors' technology incorporates an intelligent electronic control system to optimize combustion, ensuring responsive performance in daily driving. Additionally, the engine boasts high compatibility, supporting various fuel types, making it reliable for long-distance travel. The downside might be slightly more complex maintenance, though regular 4S shops can handle it.
Was this review help?
14
0
Share
Expand All
More Forum Discussions

Why is the engine warning light on the dashboard illuminated?

The engine warning light may illuminate due to the following 7 main reasons: Sensor malfunction: This refers to sensors including coolant temperature, crankshaft position, air flow, intake air temperature, and oxygen sensors. When these sensors are damaged, have poor connections, or experience signal interruptions, the vehicle's ECU cannot accurately obtain engine data, triggering the warning light. Fuel/oil quality issues: Failure to use fuel and engine oil as specified by the manufacturer may cause engine wear, leading to the warning light activation. Poor fuel mixture combustion: Incomplete combustion can cause engine carbon buildup or knocking. When detected by oxygen sensors and reported to the ECU, the warning light will illuminate. Issues like spark plug failure, ignition coil problems, fuel pump malfunction, or fuel line blockages can all lead to poor combustion. Turbocharging problems: The intake boost piping or turbocharger can trigger the warning light. The most common issue is turbocharger damage, often accompanied by oil leaks, excessive oil consumption, power loss, metallic noises, or blue/black exhaust smoke. Intake system issues: Air intake problems may cause engine pipe blockages, potentially triggering the warning light. A dirty air filter that hasn't been regularly cleaned can lead to intake problems. Exhaust system problems: Exhaust faults can also activate the warning light. Common causes include rear oxygen sensor failure, three-way catalytic converter issues, or exhaust camshaft and bearing failures. Using leaded gasoline, lead/silicon-containing lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions may cause three-way catalytic converter problems. Anti-theft system malfunction: If the electronic anti-theft system fails or the anti-theft controller doesn't match the engine ECU, the system may prevent normal engine operation while illuminating the warning light. When the engine warning light illuminates, follow these steps: First check if the engine is operating normally. If there's noticeable shaking, black smoke, etc., avoid restarting the engine. Particularly important - never restart if the red warning light is on. If the engine can start, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the ON position (without depressing the clutch). The vehicle will perform a self-check during power-on. After 5-10 seconds, observe if the warning light turns off. If the light remains on, visit a service station promptly. Technicians can use diagnostic tools to read trouble codes, identify specific issues, and perform targeted repairs.
1
1
Share

How to adjust the seats of Emgrand GL?

The method to adjust the seats of Emgrand GL is as follows: 1. Enter the vehicle and locate the seat adjustment switch; 2. Push the left switch forward or backward to adjust the seat's front and rear position; 3. Move the left switch up or down to adjust the seat's height; 4. Use the right switch to adjust the seat back angle. The Emgrand GL is a compact 4-door 5-seater sedan with body dimensions of 4725mm in length, 1802mm in width, and 1478mm in height, with a wheelbase of 2700mm. It is equipped with a 1.4T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 104 kW and a maximum torque of 235 Nm. The drivetrain is front-wheel drive, with a MacPherson independent front suspension and a torsion beam non-independent rear suspension.
10
4
Share

How to Open the Jaguar Fuel Tank Cap?

The method to open the Jaguar fuel tank cap is: 1. Press the key to unlock, and the fuel tank cap will pop open by itself; 2. Gently press the fuel tank cap. Jaguar is a British luxury car brand, and its models include: Jaguar XFL, Jaguar XEL, Jaguar F-PACE, Jaguar XF, Jaguar XJ, etc. Taking the 2020 Jaguar XFL two-wheel-drive Feng Hua version as an example, it is a mid-to-large-sized 4-door 5-seater sedan with body dimensions of: length 5093mm, width 1880mm, height 1456mm, and a wheelbase of 3100mm. It is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, with a maximum power of 147 kilowatts and a maximum torque of 320 Newton meters.
2
1
Share

What gear should be used when driving an automatic transmission car up a steep slope?

When driving an automatic transmission car up a steep slope, use the L gear, which is the low-speed gear. The method for starting an automatic transmission car on an uphill is: 1. Press the brake while pulling up the handbrake; 2. Shift the gear to L or S gear and gradually apply the throttle; 3. When the car's forward power is held back by the handbrake, slowly release the handbrake, and the vehicle will start climbing the slope smoothly. An automatic transmission means that the driver does not need to manually shift gears; the vehicle will automatically select the appropriate gear based on the driving speed and traffic conditions. The gears of an automatic transmission car are: 1. P gear is the parking gear; 2. R gear is the reverse gear; 3. N gear is the neutral gear; 4. D gear is the drive gear; 5. S gear is the sport mode.
12
3
Share

What needs to be replaced during the second car maintenance?

What needs to be replaced during the second car maintenance includes: 1. Engine oil and oil filter; 2. Air filter; 3. Fuel filter; 4. Transmission fluid; 5. Cabin air filter. The second car maintenance refers to secondary maintenance or secondary service, and its inspection items include: 1. Spark plugs; 2. Brake fluid; 3. Throttle valve; 4. Fuel injectors; 5. Tires and braking system; 6. Engine belts; 7. Performance of headlights, warning lights, turn signals and car horn. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting or replacing certain parts of the car, also known as car servicing.
18
0
Share

How to Check for Inventory Cars?

Methods to check for inventory cars include: 1. Check the vehicle nameplate; 2. Inspect tire wear and manufacturing date; 3. Examine whether the inner wall of the exhaust pipe is clean; 4. Look for dust in the engine compartment, check if components are deformed, discolored, neatly arranged, or show signs of removal; 5. Inspect the vehicle's rubber parts for aging or detachment; 6. Check the foot pedals inside the car for wear or excessive dust in the gaps; 7. Observe the gaps in the front and rear bumpers, body gaps, and door gaps, open the doors to check for color differences between the interior and exterior paint; 8. Ensure the paint on the lower edge of the door frame is intact. Inventory cars refer to vehicles that have been in stock for more than 6 months without being sold.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.