What is the engine number of the BYD Tang?

What is the 0-100km/h acceleration time of the MG6 Pro?

The MG6 Pro achieves a 0-100km/h acceleration in just 8 seconds. It is equipped with SAIC's Blue Core 2.0 MEGA-Tech next-generation powertrain combination, primarily targeting young consumers. The new vehicle features a pure black large-sized polygonal front grille, split-type headlight clusters with the upper section housing daytime running lights and turn signals, while the high/low beam headlights are relocated to concealed positions on either side of the grille. Below is more detailed information: 1. Exterior: The vehicle adopts a four-door hatchback design with dark black five-spoke large-sized alloy wheels paired with red single-piston calipers. It features dual exhaust pipes, a large rear spoiler, and smoked treatments for the chrome strip between the taillights and the taillights themselves. 2. Features: The car comes with a three-spoke multifunction steering wheel, a full LCD instrument cluster, a 10.1-inch frameless suspension control screen, and an electronic gear shift mechanism. The interior uses a dual-tone color scheme with bright orange accents. It offers two driving modes, including Super-Sport mode with one-touch activation, switchable sport exhaust, dynamic curve control system, and electric power steering. The vehicle is also equipped with the latest operating system, air conditioning, and a vehicle connectivity system. 3. Powertrain: The new model is powered by a Mega-Tech 1.5T high-performance engine delivering a maximum power of 133kW and peak torque of 285N·m, paired with a 7-speed dual-clutch transmission boasting 97% efficiency, enabling the 0-100km/h sprint in 8 seconds.

8

2

Share

What is the principle of car reversing?

The principle of the reverse gear is to add an additional gear between the driving gear and the driven gear. In other words, gears 1 to 5 are forward gears driven by two gears, while the reverse gear is driven by a single gear. Below is an introduction to reversing: 1. Introduction: Reversing refers to the backward movement of a motor vehicle. It also refers to the act of "transferring" during travel, i.e., switching from one vehicle to another. Reversing is more challenging than driving forward, mainly due to limited visibility. 2. Four hazards to prevent: Collision prevention: When shifting in reverse, pay attention to the width of the target position and assess the obstacles behind and on both sides of the vehicle relative to the safe position of the rear wheels. To avoid collisions, scrapes, or falling into ditches, it may be necessary to have someone guide the vehicle from behind. Garage scrape prevention: When reversing into a garage, if visibility is good, you can directly observe and judge through the rear window. If visibility is poor and you cannot see clearly, open the door and assess the position of the vehicle in the garage from one side while also checking the other side through the rearview mirror to prevent scraping the garage or other vehicles. Side scrape prevention: When reversing around a corner, pay attention to the situation on the inside of the turn and behind the vehicle. Use the rearview mirror to monitor both sides of the vehicle and time the steering wheel correctly to avoid rear-end collisions or side scrapes. Ditch fall prevention: When reversing to turn around, if the road is wide enough, you can judge the position of the rear or wheels directly through the rearview mirror. If multiple forward and reverse movements are needed, step out to check the safe distance between the wheels and the road to prevent falling into a ditch.

19

0

Share

What is the symbol for China VI emission standard?

The symbols for China 1 to China 6 emission standards are I, II, III, IV, V, and VI respectively, with China VI being represented as VI. On July 1, 2000, China first introduced the China 1 emission standard, which was based on European emission standards and aligned with international standards, hence the use of Roman numerals for China 1 to China 6 symbols. The functions of the environmental protection label include: 1. Serving as proof of a vehicle's compliance with emission standards; 2. Acting as the basis for determining the periodic environmental inspection cycle of vehicles; 3. Implementing traffic control measures for high-emission vehicles and serving as a pass for vehicles in restricted zones; 4. Providing a basis for relevant authorities to manage vehicle environmental compliance.

2

Share

Where to Add Windshield Washer Fluid for Arrizo 5?

Arrizo 5's windshield washer fluid reservoir is located in the engine compartment, next to the coolant tank, marked by a blue plastic cap. When refilling the washer fluid, do not exceed the MAX mark; always leave some space. Overfilling not only wastes fluid but may also cause rust on engine components. The Arrizo 5 is a compact sedan produced by Chery, with dimensions of 4572mm in length, 1825mm in width, and 1482mm in height, and a wheelbase of 2670mm. It is equipped with a 1.5L naturally aspirated engine delivering a maximum power of 116 horsepower and a peak torque of 141 Nm, paired with either a 5-speed manual transmission or a 7-speed CVT. The manual transmission features a gear shift reminder, while the CVT offers both Eco and Sport modes for a more versatile driving experience.

8

5

Share

What is the proper position for adjusting the seat forward and backward in Subject 2?

For adjusting the seat forward and backward in Subject 2, lean back naturally against the seat back, extend your arms naturally, and your wrists should rest exactly on the highest point of the steering wheel for the proper position. Below are the precautions for Subject 2: 1. Reverse parking: The main points for deduction in reverse parking include pressing the line while reversing, the car not entering the parking space, exceeding the time limit, and not following the prescribed route. Reverse parking must be completed within 210 seconds; exceeding the time limit results in failure. During the test, first reverse to the right, then to the left. Not following this sequence results in failure. While reversing, pay attention to the 30cm margin issue. 2. Parallel parking: The main points for deduction in parallel parking include the turn signal, 30cm margin, and pressing the line. When entering the test area, turn right in advance and observe the highest point of the wiper aligning with the roadside line to adjust the 30cm margin. While reversing, remember the first right full turn, straightening, left full turn, parking in the space, turning on the left turn signal, and observing the rearview mirror when exiting to prevent the wheels from pressing the line. 3. Right-angle turn: The main points for deduction in the right-angle turn include the turn signal and pressing the line. After entering the test area, turn on the turn signal. After the voice prompt, turn off the turn signal. Incorrect operation of the turn signal deducts 10 points. After entering the right-angle turn, adjust the body to maintain a 30cm margin from the line. The reference point is the same as in parallel parking. When making a full turn, slightly release the clutch to prevent stopping or stalling midway. Straighten the body after the rear wheels exit to prevent the wheels from pressing the line.

2

4

Share

Why is the Mondeo called 'Mengdiudiu'?

The pronunciation 'mengdio' when spoken quickly becomes 'mengdiuo', and even faster becomes 'mengdiuu'. Due to the affectionate nature of reduplicated words, it was named 'Mengdiudiu'. Additional information about the Mondeo is as follows: 1. Configuration: The Ford New Mondeo offers 7 models with two engine options: 1.5T and 2.0T. The new Mondeo adopts Ford's latest family-style exterior design, with the most noticeable feature being the 'catfish mouth' grille + dual chrome horizontal bars. All models come with LED headlights, which refers not only to the LED daytime running lights but also the main headlight source being LED. 2. Body: The side profile of the new-generation model is actually quite similar to the current Mondeo Zhisheng. However, the new model features more pronounced upper and lower door character lines, giving it a lower center of gravity. The most significant difference is that the rearview mirror brackets have been moved from the window corners to the door panels to reduce blind spots in the A-pillar. 3. Powertrain: Additionally, the turn signals on the rearview mirrors have been upgraded to LED bulbs. Apart from the differences in headlights, the chrome trim on the new car varies depending on the model configuration. The two 1.5T models only have chrome trim along the lower edge of the windows, while all 2.0T models feature chrome trim around the entire window frame. Furthermore, the 2.0L GTDi240 Luxury Sport model comes with a spoiler and an 'S' badge, while the 2.0L GTDi240 Premium and Flagship models feature a 'TITANIUM' badge to highlight their high-end status.

2

4

Share

What is the engine number of the BYD Tang?

What is the 0-100km/h acceleration time of the MG6 Pro?

What is the principle of car reversing?

What is the symbol for China VI emission standard?

Where to Add Windshield Washer Fluid for Arrizo 5?

What is the proper position for adjusting the seat forward and backward in Subject 2?

Why is the Mondeo called 'Mengdiudiu'?

Honda Lingpai has power but won't start with one-button ignition?

How to Drain Windshield Washer Fluid from a Sedan?

Is It Safe to Drive with a Noisy Differential?

What does it mean when the bulb failure warning light comes on?