What is the engine model of the Xingyue L?

1 Answers
LaJoshua
07/29/25 3:45pm
The engine models of the Xingyue L are: JLH-4G20TDJ for the two-wheel drive version and JLH-4G20TDB for the four-wheel drive version. The following are some related details about the Xingyue L: 1. Body dimensions: The length, width, and height are 4770mm, 1895mm, and 1689mm respectively, with a wheelbase of 2845mm. The body structure is a 5-door, 5-seat SUV. 2. Powertrain: It is equipped with a 2.0T turbocharged engine, paired with a 7-speed automatic transmission. The front suspension type is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension.
Was this review help?
4
2
Share
More Forum Discussions

How to Turn on the Air Conditioning in a Volkswagen Car?

First, start the car, turn the temperature control knob to the cold side (blue end), then turn on the AC switch and the fan (with settings 1, 2, 3, and 4). To get hot air, turn the temperature control knob to the red side and turn on the fan switch. The specific steps are as follows: 1. For cold air, adjust the left knob to the blue side; for warm air, adjust it to the red side, then press the AC switch. The middle button controls the fan speed, and the rightmost button adjusts the mode, allowing you to direct air to the feet, hands, or windshield, or use a combination of modes. 2. If the air conditioning fails to cool, first check if the AC compressor can start and operate normally and verify the refrigerant level. If the compressor doesn't start, there may be an issue with the control circuit or the system may be low on refrigerant, putting the compressor in protection mode. You can check the high and low-pressure line pressures using a pressure gauge, and the refrigerant level can be visually inspected through the observation window on the high-pressure line. Air conditioning cooling issues are common and relatively easy to fix, so it's recommended to take the car to a specialized repair shop for diagnosis based on the above analysis.
17
5
Share

What are the methods to remove odors from car interiors?

There are three methods to remove odors from car interiors: 1. Place items that emit a pleasant fragrance or bamboo charcoal bags in the car. Examples include fruits or fruit peels, car perfumes, agarwood pendants, etc. Alternatively, you can place fruits or fruit peels like orange peels, pomelo peels, or lemons in the car. These fruits release their distinctive aromas, which can freshen the air. Additionally, purchasing bamboo charcoal bags can help absorb harmful substances and odors in new cars. 2. Ozone sterilization, high-temperature steam disinfection, and photocatalytic disinfection. Visit a car detailing shop for odor removal, with photocatalytic disinfection being the most effective method, though it is also more expensive. Ozone sterilization and high-temperature steam disinfection are relatively much cheaper, allowing you to choose the appropriate cleaning method for your car. 3. Use a car air purifier. Car air purifiers can filter the air inside the vehicle, with higher-quality products offering more noticeable filtration effects. However, due to their limited size, the cleaning efficiency of car air purifiers is also quite limited.
14
0
Share

Which brand is the four-wheel drive system of Lynk & Co?

Lynk & Co uses BorgWarner's fifth-generation intelligent four-wheel drive system. Below is the relevant introduction: 1. Definition: LYNK & CO (Chinese name: Lynk & Co) is a new era premium brand jointly established by Geely Holding Group, Geely Auto Group, and Volvo Car Group. It integrates European technology, European design, global manufacturing, and global sales, based on the CMA (Compact Modular Architecture) jointly developed by Volvo Cars and Geely Auto, with Volvo Cars taking the lead. 2. Development: On October 20, 2016, the Lynk & Co brand was officially launched in Berlin, Germany. The Lynk & Co 01, the first model developed based on the CMA architecture, is a new era SUV designed for urban young people and was officially launched on November 28, 2017. By November 28, 2018, the cumulative sales of Lynk & Co 01 reached nearly 100,000 units in its first year, with the number of users exceeding 80,000.
5
5
Share

What happens if you shift into P gear while driving?

Most automatic transmission models on the market are equipped with a transmission protection system. Some vehicles cannot shift into P gear while moving, while others may not cause any significant impact even if shifted into P gear during driving, similar to being in neutral. Here are the relevant details: 1. However, if the gear is kept in P for a prolonged period while the vehicle is moving, it can accelerate wear on the transmission gears, potentially leading to transmission damage or even complete failure. Therefore, it is best to avoid shifting into P gear while the vehicle is in motion. 2. P gear and N gear work similarly in that they both interrupt the engine's power. The difference lies in the fact that P gear includes a parking gear and parking pawl. When shifted into P gear, these components lock, providing braking force to prevent the vehicle from rolling, which is why P gear is referred to as the parking gear. 3. Modern vehicles generally have a transmission protection system that prevents the parking gear and parking pawl from locking if the car detects a shift into P gear while driving, thus minimizing impact, similar to neutral. While driving, it is crucial to remain cautious and attentive to avoid shifting into the wrong gear and causing safety hazards.
11
5
Share

Where is the Cruze air conditioning pressure switch located?

The Cruze air conditioning pressure switch is generally located in the vehicle's air conditioning refrigerant circulation pipeline. Below is relevant information about the air conditioning pressure sensor: 1. Function of the pressure sensor: The air conditioning pressure sensor is a sensor component of the automatic air conditioning control system. Its role is to prevent the refrigeration system from operating under extreme refrigerant pipeline pressure and to assist in controlling the cooling fan's speed. The pressure sensor is installed on the high-pressure pipeline of the air conditioning system. This sensor outputs a pressure signal to the air conditioning control unit. When it detects that the air conditioning refrigerant pipeline pressure is too low or too high, the control system stops supplying power to the air conditioning compressor clutch, causing the compressor to stop operating to avoid damage to the air conditioning system. When the refrigerant pressure reaches a medium pressure value, the radiator fan operates at high speed to reduce the air conditioning refrigerant pressure. 2. Working principle of the air conditioning pressure sensor: The pressure sensor is a device that can convert the detected pressure signal into an electronic signal, which is then processed by the computer board chip to finely control the components of the air conditioning unit based on the pressure detection results. There are two types of pressure sensors in appearance. Nowadays, the vast majority of pressure sensors are capacitive pressure sensors, consisting of two closely spaced parallel diaphragms and a sturdy, compact housing.
17
4
Share

Where is the Lynk & Co 05 rearview mirror heating switch located?

Lynk & Co 05 rearview mirror heating switch is located on the fourth button below the center console screen, featuring a small icon with three upward-pointing arrows. Not only does Lynk & Co display the rearview mirror icon this way, but many modern vehicles also use similar icons for their function buttons. Regarding the role of the rearview mirror heating function: 1. The rearview mirror heating function is quite useful, especially during light rain or snow. For example, on rainy days, after turning on the rearview mirror heating, there will be significantly less water on the rearview mirrors, greatly improving the clarity of your rearview vision and thereby enhancing driving safety. However, its effectiveness is limited during heavy rain. It works better in light rain or humid conditions. Additionally, remember to turn off this function after use, as it will continue heating otherwise. 2. During rainy or snowy weather, when the rearview mirror heating switch is pressed, the indicator light on the button will illuminate, and the heating element will quickly warm up to a set temperature within minutes. In low-temperature conditions, steam will emerge from both side mirrors, and the water droplets on the mirror surfaces will gradually evaporate, with fog slowly disappearing. This achieves the effect of heating the mirrors, removing fog and frost.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.