What is the engine model of the Touran?

1 Answers
SanMaria
07/30/25 1:28am
The engine model of the Touran is the EA211, a 1.4-liter turbocharged engine commonly found in many Volkswagen models. The Touran's 1.4-liter turbocharged engine delivers a maximum power of 150 horsepower and a maximum torque of 250 Nm, with the maximum power achieved at 5,000 rpm and the maximum torque available between 1,750 to 3,000 rpm. It is paired with a 7-speed dual-clutch transmission. The new Touran also offers a spacious interior, with body dimensions of 4,527 mm in length, 1,829 mm in width, and 1,659 mm in height, and a wheelbase of 2,791 mm.
Was this review help?
14
1
Share
More Forum Discussions

Where is the stability control system switch of Emgrand GS?

This is automatic and has no switch, designed to ensure the safety of both the driver and passengers during travel. Below is relevant information about the Vehicle Stability Control System: 1. System Introduction: The Vehicle Stability Control System, also known as the Anti-Skid Control System (Skid-Control-System), was first adopted in domestic vehicles by Toyota's Corolla Altis (Toyota calls it VSC). Currently, it is widely used in higher-priced domestic vehicles. The Vehicle Stability Control System is an active safety system that includes ABS and ASR, preventing wheel lock-up during braking (ABS) and wheel slip during acceleration (ASR). 2. Working Principle: When a car is turning, if the front wheels first reach the adhesion limit, it can cause a 'drift-out' phenomenon. In this situation, no matter how the driver steers, the turning radius cannot be reduced, making it difficult to follow the intended path and resulting in understeer. If the rear wheels first reach the adhesion limit, a 'fishtailing' phenomenon occurs, making the car itself unstable and quickly pulling it towards the direction of the turn, known as oversteer.
15
1
Share

Has the Toyota Sienna passed the China 6 emission standard?

21 Toyota Sienna has passed the China 6 environmental protection review. The following is a detailed introduction about the Toyota Sienna China 6: 1. Design style: The Sienna adopts Toyota's family-style design, which is more fashionable and sporty. The rich lines make the new car look more powerful. Overall, it looks very grand, and compared to the Buick GL8, the new Toyota Sienna is more eye-catching. 2. Interior part: The center console is designed to lean towards the driver's side, with clear divisions in the upper, middle, and lower areas, giving a strong sense of refinement. 3. Configuration: The new Sienna provides 12 speakers, online navigation, Apple Carplay, Android Auto, heads-up display, panoramic imaging, and Toyota's latest active and passive safety systems. 3. Body: The overall lines of the Toyota Sienna are smooth and soft, giving a sense of intimacy. The avant-garde and fashionable appearance, combined with the low center of gravity body, creates a strong visual impact.
7
3
Share

Where is the engine coolant located?

Car engine coolant is located in the coolant reservoir on the right side of the engine compartment. What is coolant: The full name of coolant should be antifreeze coolant, meaning it has antifreeze functionality. Coolant prevents the freezing of the cooling liquid during cold winter parking, which could otherwise crack the radiator and damage the engine cylinder block or head. Functions of coolant: Coolant is a type of cooling liquid containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and resisting scale and corrosion year-round. Composition of coolant: The main components of coolant are 50% pure water, 40% methanol, and 10% other substances. Coolant replacement interval: For vehicles that operate for extended periods, such as taxis, high-quality coolant should generally be replaced annually. For vehicles with shorter operating times, replacement can be done every two years or every 30,000 kilometers. To prevent excessive foam formation, which reduces the heat exchange efficiency between the coolant and engine components, ensure the product is within its validity period when adding. Long-life coolant can remain effective for up to three years. If suspended particles, sediment, or signs of deterioration or discoloration are observed in the coolant, it should be replaced promptly, and the system should be cleaned.
2
0
Share

What is the reason for the retraction of the rear brake caliper on the Ford Mondeo?

The reason for the retraction of the rear brake caliper on the Ford Mondeo is that the brake caliper retracts after the brake system returns to its original position. There are three types of brake systems: 1. Foot brake: The commonly used brake while driving is operated by the foot, also known as the foot brake. When the driver presses the brake pedal, the braking force is transmitted mechanically or hydraulically to the braking device at the wheels, creating friction. 2. Parking brake: Also known as the handbrake, it is used to prevent the vehicle from slipping when parked. There are generally two types: the intermediate brake type installed on the drive shaft and the direct control rear wheel brake type. 3. Anti-lock braking system (ABS): When driving on slippery or icy low-friction roads, excessive braking can cause the wheels to lock up and lose traction, leading to a loss of directional control. To enable effective control of the vehicle's direction on such hazardous roads, the ABS 'Anti-lock Braking System' was developed.
5
1
Share

Does the Sylphy's Transmission Filter Need to Be Replaced?

Replacing the transmission fluid in a car does not necessarily require changing the filter. If the transmission fluid is replaced without removing the oil pan, the filter cannot be changed. Among vehicle maintenance tasks, changing the transmission fluid is a crucial one. Generally, transmission fluid should be replaced every two years or after driving approximately 40,000 to 60,000 kilometers. However, there is a filter inside the transmission oil tank, and often, the transmission fluid is changed without replacing the transmission fluid filter. Below is an introduction to the Sylphy: 1. Power: The Sylphy is equipped with a 1.6L naturally aspirated engine that complies with the China VI emission standards, delivering a maximum power of 99kW (135 horsepower) and a peak torque of 159Nm. The transmission system is matched with a CVT gearbox. 2. Configuration: The new car features the latest NissanConnect super-connected system, which includes an 8-inch high-definition capacitive touchscreen. This system supports voice control for the vehicle, remote control functions, and basic operations such as online entertainment, all-time online navigation, Bluetooth calls, dash cams, and air conditioning through simple voice commands.
7
1
Share

Is the Avalon transmission AT or CVT?

The 2.0L model of the Avalon uses a CVT transmission, while the 2.5L model uses an AT transmission. About the Avalon: The Avalon is a mid-size sedan under Toyota, with dimensions of 4975mm in length, 1850mm in width, 1450mm in height, and a wheelbase of 2870mm. The Avalon is a four-door, five-seater sedan. (1) 2.0L naturally aspirated engine: It has a maximum power of 131kW and a maximum torque of 210Nm. The engine reaches its maximum power at 6600 rpm and its maximum torque between 4400 to 5200 rpm. This engine is equipped with VVT-ie technology and hybrid injection technology, and uses an aluminum alloy cylinder head and block. The use of aluminum alloy reduces the engine's weight, improving the car's handling and fuel efficiency. (2) The 2.5L naturally aspirated engine has a maximum power of 154kW and a maximum torque of 250Nm. This engine reaches its maximum power at 6600 rpm and its maximum torque at 5000 rpm. It is also equipped with VVT-ie technology and hybrid injection technology, and uses an aluminum alloy cylinder head and block.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.