What is the engine model of the Touareg?

1 Answers
ElleFitz
07/30/25 3:33am
The engine models of the Touareg are: the 2.0T engine is the third-generation EA888 engine, and the 3.0T engine is the brand-new EA839 engine. In terms of power, the 2.0T low-power engine has a maximum power of 180 kW and a maximum torque of 370 Nm; the 2.0T high-power engine has a maximum power of 185 kW and a maximum torque of 370 Nm. The 3.0T engine has a maximum power of 250 kW and a maximum torque of 450 Nm. The Volkswagen Touareg is a large SUV produced by Volkswagen. In terms of body dimensions, its length, width, and height are 4795 mm, 1940 mm, and 1709 mm, respectively. In terms of appearance, the car's wide chrome grille and rectangular air intake grille reflect the traditional Volkswagen family design; the front headlights exude understated luxury, with LED headlights that are quite low-key yet luxurious; the streamlined headlights not only look good but also provide illumination for nighttime driving, although the standard version does not come with cornering light functionality.
Was this review help?
6
2
Share
More Forum Discussions

From Which National Emission Standard Did Cars Start Having Three-Way Catalytic Converters?

Three-way catalytic converters started being installed in cars from the National III emission standard. In earlier years, vehicles produced in China that did not meet the National II emission standard were not equipped with three-way catalytic converters. Composition of a Three-Way Catalytic Converter: A three-way catalytic converter is generally composed of four parts: the shell, vibration damping layer, substrate, and catalyst coating. Shell: Made of stainless steel to prevent the detachment of oxide scales, which could block the substrate. Vibration Damping Layer: Consists of a gasket or wire mesh pad, serving to seal, insulate, and secure the substrate. To protect the substrate from damage due to vibration, thermal deformation, and other factors, the gasket is made of expanded mica and aluminum silicate fibers, bonded together with adhesive. Substrate: Constructed from honeycomb-shaped ceramic materials, though many also use metal (including stainless steel) materials. Catalyst: Composed of precious metals such as platinum, rhodium, and palladium, sprayed onto the substrate to form the purifying agent. Lifespan of a Three-Way Catalytic Converter: The lifespan of a three-way catalytic converter is typically between 80,000 and 100,000 kilometers. The exact lifespan depends on the vehicle's usage conditions, as well as the quality of fuel used and the driving environment.
18
3
Share

What are the three points in curve driving?

The three points in curve driving are when the hood overlaps with the right-side arc, when the left front of the car overlaps with the right-side arc, and when the left front of the car aligns with the left-side arc. When the hood overlaps with the right-side arc: After entering the S-curve, observe carefully. When the hood overlaps with the right-side arc, turn the steering wheel one full turn to the left. When the left front of the car overlaps with the right-side arc: As the vehicle continues to move forward, when the left front of the car overlaps with the right-side arc, turn the steering wheel half a turn to the left, then make slight adjustments to keep the front of the car overlapping with the arc. When the left front of the car aligns with the left-side arc: Before entering the right curve, observe carefully. When the left front of the car aligns with the left-side arc, straighten the steering wheel.
9
5
Share

What are the reasons for engine overheating preventing startup?

Engine overheating preventing startup can be caused by insufficient coolant, thermostat failure, or exhaust system issues. Insufficient Coolant: Prolonged water circulation during engine operation can gradually deplete the coolant in the engine's cooling system, leading to radiator water shortage. If the owner fails to promptly inspect and replenish the coolant, this can easily result in engine overheating. Solution: Immediately stop the vehicle, let the engine idle to utilize the fan for cooling (do not turn off the engine to prevent cylinder sticking). After the water temperature decreases slightly, open the radiator drain valve to release some hot water and steam, reducing steam pressure in the cooling system to prevent scalding when opening the radiator cap. This also avoids cylinder head cracking from sudden cold coolant addition to a hot engine. Add appropriate coolant to the expansion tank until it reaches between the MAX and MIN marks. Thermostat Failure: The thermostat controls coolant flow paths. If it becomes stuck or fails, the engine's circulation cycles will be affected, preventing effective heat dissipation. Solution: Replace the thermostat. Exhaust System Issues: A blocked catalytic converter or broken pipes can cause engine exhaust obstruction, leading to overheating. Solution: Clean or replace damaged components.
16
3
Share

Is the left turn signal activated by pushing down?

The left turn signal is activated by pushing down. The turn signal is a warning light used by motor vehicles to alert surrounding vehicles and pedestrians to yield when turning. When the turn signal is activated, the light flashes repeatedly to attract the attention of people nearby and prevent traffic accidents. Right turn signal: The right turn signal should be activated in advance when making a right turn, changing lanes to the right, returning to the original lane after overtaking, or parking by the roadside. When exiting a roundabout, the right turn signal should be used to alert vehicles behind and oncoming vehicles. This is a clear stipulation in the new traffic regulations. Previously, many drivers would use the left turn signal when entering a roundabout. Left turn signal: The left turn signal should be activated in advance when making a left turn, changing lanes to the left, preparing to overtake, leaving a parking spot, or making a U-turn. This is because entering a highway involves turning left, while exiting a highway involves turning right. Similarly, when entering a main road from an auxiliary road, the left turn signal should be used.
18
2
Share

Can a car with a sunroof be modified to one without a sunroof?

A car with a sunroof can be modified to one without a sunroof. However, privately altering the sunroof can pose safety hazards to both the driver and passengers, as vehicles are tested for performance and crash safety during their design and manufacturing phases, and they must pass inspections by national quality and technical supervision authorities. The functions of a car sunroof: Installed on the roof of the car, a sunroof effectively facilitates air circulation inside the vehicle, allowing fresh air to enter. Additionally, it enhances visibility and meets the needs of mobile photography and videography. Types of car sunroofs: Car sunroofs can be broadly categorized into: sliding-out, built-in, built-in flip-out, panoramic, and curtain-style sunroofs. They are primarily installed on commercial SUVs, sedans, and other vehicle models.
4
4
Share

How significant is the impact if one of the tire-fixing studs breaks?

Breaking one of the tire-fixing studs has a relatively significant impact. Once a stud breaks, it compromises the overall stability of the wheel, shortens the lifespan of the remaining studs, and poses a safety risk to the vehicle. It is recommended to replace it as soon as possible. Supporting the entire weight of the vehicle: Automotive tires bear the full weight of the vehicle, withstand the load, and transmit forces and moments in other directions. Transmitting traction and braking torque: Automotive tires transmit traction and braking torque, ensuring good adhesion between the wheel and the road surface to enhance the vehicle's power performance, braking efficiency, and off-road capability. They work in conjunction with the vehicle's suspension to absorb shocks during driving and dampen resulting vibrations. Preventing damage to vehicle components: Automotive tires protect vehicle components from severe vibrations and premature wear, adapt to high-speed performance, reduce driving noise, and ensure safety, handling stability, comfort, and fuel efficiency.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.