What is the engine model of the Soueast DX7?

1 Answers
ChristopherFitz
07/30/25 6:59am
The engine model of the Soueast DX7 is the 4A91-turbo engine, with a maximum power of 145KW, maximum horsepower of 197, and maximum torque of 285Nm. The engine of the Soueast DX7 is produced by Shenyang Aerospace Mitsubishi and is a domestically manufactured engine. For daily maintenance of the Soueast DX7 engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard being no lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will deteriorate during use. After a certain mileage, performance degradation can cause various problems for the engine. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate out, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures normal engine operation but also extends the overall lifespan of the radiator and engine.
Was this review help?
17
1
Share
More Forum Discussions

What are the hazards of transmission shaft oil seal leakage?

The hazards of transmission shaft oil seal leakage include: 1. Reduced lifespan of the transmission shaft; 2. Increased failure rate due to transmission shaft issues. The transmission shaft is a high-speed rotating body with minimal support, making dynamic balance crucial. Generally, transmission shafts undergo dynamic balance testing before leaving the factory and are adjusted on a balancing machine. The transmission shaft is a vital component in the vehicle's drivetrain for transmitting power, working together with the gearbox and drive axle to transfer the engine's power to the wheels, generating driving force for the vehicle. The transmission shaft consists of an axle tube, telescopic sleeve, and universal joint. The telescopic sleeve automatically adjusts for distance variations between the transmission and drive axle, while the universal joint ensures changes in the angle between the gearbox output shaft and drive axle input shaft, achieving constant angular velocity transmission between the two shafts.
19
1
Share

What is the front axle structure of a car?

The front axle structure of a car consists of: front axle, kingpin, steering knuckle, brake assembly, wheel hub assembly, steering arm, and tie rod assembly. The front axle is a device that transmits various directional forces between the frame and the front wheels, as well as the resulting bending moments and torques. It is connected to the steering system via the steering knuckle, allowing the steering force output by the steering gear to be transmitted to the wheels to achieve vehicle steering. The front axle of a car not only supports the sprung mass of the front part of the vehicle and bears vertical loads but also withstands various longitudinal forces, lateral forces, and related moments. The front axle of a car can be categorized by brake type into drum brakes and disc brakes, and by brake system into air brakes and hydraulic brakes (single-leading-shoe and duo-servo types). The axle load ranges from 0.5 to 7.5 tons for micro trucks, light trucks, medium trucks, and heavy trucks.
4
4
Share

What type of engine oil should be used for Jetta?

Jetta should use 5W40 or higher grade engine oil. Here, 5 represents the oil's resistance to external low temperatures down to -30°C, W indicates winter suitability, and 40 denotes a kinematic viscosity standard of 40 at 100°C. Engine oil, also known as motor lubricant, serves multiple functions for the engine including lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. Jetta is an automobile brand under FAW-Volkswagen Automotive Co., Ltd., a joint venture of German Volkswagen Group in China. Taking the Jetta VS7 as an example: it is a mid-size SUV with dimensions of 4624mm in length, 1841mm in width, and 1644mm in height, featuring a wheelbase of 2730mm. It is equipped with a 1.4T turbocharged engine paired with either a 5-speed manual or 6-speed automatic transmission.
5
2
Share

What is the difference between tire models 225 and 235?

The differences between 225 tires and 235 tires are: The contact area with the ground is different: The contact area of a 225 tire is 225mm; the contact area of a 235 tire is 235mm. Fuel consumption differs: 235 tires consume more fuel than 225 tires. The larger contact area of 235 tires results in greater friction, increasing driving resistance and ultimately leading to higher fuel consumption. Safety varies: 235 tires have greater friction and stronger grip than 225 tires, shortening braking distance and improving driving stability, thus offering higher safety. Tires are one of the most important components of a vehicle. Their main functions include: Supporting the entire weight of the vehicle, bearing the load, transmitting traction and braking torque, and ensuring adhesion between the wheels and the road. Reducing and absorbing vibrations and impacts during driving, preventing severe vibrations and early damage to vehicle components, adapting to high-speed performance while reducing driving noise, and ensuring safety, handling stability, comfort, and fuel economy. In daily use, the following points should be noted for tires: Regularly inspect the tire surface for cracks, deformations, or other defects. Due to wear from driving, the tread grooves gradually become shallower. If the tread is worn flat, it loses its drainage and anti-slip functions, significantly reducing the vehicle's performance. Small cracks can also pose a risk of tire blowouts at high speeds. Additionally, promptly remove stones lodged in the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that can deteriorate rubber. After parking, avoid turning the steering wheel, as this accelerates tire wear. Do not splash water to cool tires. In hot weather or during high-speed driving, tires can overheat, and tire pressure may increase. In such cases, stop to allow the tires to cool naturally. Never release air to reduce pressure or splash water to cool the tires, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Minimize frequent or hard braking to prevent accelerated tread wear from dragging on the ground.
17
2
Share

How Many Days Is the Compulsory Traffic Insurance Allowed to Be Overdue?

Compulsory traffic insurance cannot be overdue; it should be renewed within 90 days before the expiration date. After the compulsory traffic insurance expires, you should bring the previous year's insurance policy, ID card, vehicle license, and other documents to the insurance company to complete the renewal procedures and pay the premium. This insurance is China's first compulsory insurance system mandated by national law, with premiums uniformly regulated by the state. The Compulsory Traffic Accident Liability Insurance for Motor Vehicles is a mandatory liability insurance where the insurance company compensates for personal injuries, deaths, and property losses of victims and the insured caused by road traffic accidents involving the insured vehicle, within the liability limits.
8
2
Share

What are the body dimensions of the Kicks?

The body dimensions of the Kicks are 4295mm in length, 1760mm in width, and 1588mm in height, with a wheelbase of 2620mm, making it a compact SUV. The front fascia of the Kicks features Nissan's signature V-shaped design, with a hexagonal mesh pattern inside the grille. On the sides, the Kicks adopts a floating roof design. The interior of the Kicks is relatively simple, with a large-sized LCD display screen in the center, and the vehicle also features a unique instrument panel. In terms of configuration, the Kicks is equipped with Nissan's iSAFETY intelligent collision avoidance safety system, which includes multiple active safety features such as intelligent brake assist, lane departure warning, blind spot warning during lane changes, and rear cross-traffic alert.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.