What is the engine model of the MG6?

1 Answers
StHolden
07/30/25 5:54am
The engine model of the MG6 is 18K4C, with a maximum power of 124kw, maximum torque of 250Nm, maximum power speed of 5500rpm, and maximum torque speed of 170 Nm. The MG6 car engine was jointly developed by SAIC Motor and General Motors and is produced by SAIC's engine factory. For daily maintenance of the MG6 engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, choose SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil based on mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid faults, change the oil regularly according to usage conditions and keep the oil level moderate. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass through the bypass valve, bringing contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
Was this review help?
12
0
Share
More Forum Discussions

What brand of engine oil is used for the Haval H6?

Haval H6 originally uses semi-synthetic engine oil with SL grade and 10W-40 viscosity. Here are some introductions about the engine oil used in Haval H6: 1. Haval H6 can use any engine oil with the same specifications and parameters. Usually, about 4L of engine oil is added during an oil change, which is the amount of one barrel. It can lubricate and clean the engine. 2. All engine oils are formulated with base oils and additives. Full synthetic engine oil contains 100% non-traditional, high-performance fluids; while semi-synthetic engine oil (also known as "blended oil") has a smaller percentage of such high-performance fluids and contains traditional mineral oil.
6
0
Share

How many kilometers does a car need to be serviced?

Generally, a major service is required when a vehicle reaches 30,000 kilometers. Detailed information about car maintenance is as follows: 1. Depending on the situation, car maintenance may require replacing components such as the engine oil filter, air filter, fuel filter, power steering fluid, and spark plugs. 2. Currently, most car engines use a dry-type air filter with a paper filter element, which is lightweight, low-cost, easy to replace, and highly efficient. It is generally recommended to clean it every 5,000 kilometers. When cleaning, remove the filter element and gently tap the end face, then use compressed air to blow from the inside out to remove dust. Do not wash it with gasoline or water. 3. The air filter must be replaced every 25,000 kilometers. As for the oil filter, most car engines use a spin-on oil filter, which is a disposable, non-cleanable filter. When replacing the lubricating oil, the oil filter must also be replaced; otherwise, it may affect the quality of the lubricating oil. The replacement interval for engine oil and the oil filter is generally also 5,000 kilometers.
15
0
Share

Is the Gearbox of the Boyue Dry or Wet?

The gearbox of the Boyue is dry, meaning it is a dry-type gearbox. The differences between dry and wet clutches are as follows: 1. Their working principles are generally the same, with both having two sets of clutches working simultaneously—one managing odd-numbered gears and the other managing even-numbered gears. 2. The main difference between the two types of clutches lies in the connection medium between the driving disc and the driven disc. A dry dual-clutch transmits power through air, while a wet dual-clutch uses oil. 3. The characteristics of a dry clutch include lower cost and higher efficiency, but the drawbacks are that it is more complicated to operate and prone to damage. 4. The advantages of a wet clutch are simpler operation and lower failure rates, while the disadvantages are higher cost and lower efficiency compared to a dry clutch.
13
4
Share

Where is the car clutch located?

The car's clutch is located on the far left. Generally, a manual transmission car has three pedals, arranged from left to right as follows: the clutch pedal, the brake pedal, and the accelerator pedal. The left foot controls the clutch pedal, while the right foot controls the accelerator and brake. Here are the key points for operating the clutch: 1. To shift gears, you must press the clutch. Note that when pressing the clutch, you must press it all the way down; otherwise, it will accelerate clutch wear and, over time, make gear shifting difficult. 2. When not shifting gears, do not rest your foot on the clutch. This is because keeping your foot on the clutch for a long time may lead to accidentally pressing it due to fatigue or inertia, which can be dangerous. 3. Release the clutch gently and slowly. Many people stall the engine because they are not familiar with clutch control. Once you are familiar with it, you can also press the accelerator slightly while pressing the clutch. 4. When starting on a slope, find the semi-engagement point. Slowly release the clutch, and when the car starts to vibrate, it reaches the semi-engaged state. At this point, press the accelerator and slowly lift the clutch, and the car will move forward.
4
3
Share

How much engine oil should be added to a BMW 530?

BMW 530 requires 5 liters of engine oil. The BMW 530 is equipped with a 2.0-liter turbocharged engine. When adding engine oil, ensure that the oil level is between the min and max marks on the dipstick. The BMW 5 Series is a mid-size luxury sedan under the BMW brand. In terms of body dimensions, the BMW 530 measures 4841mm in length, 1846mm in width, and 1468mm in height, with a wheelbase of 2888mm. The trunk volume is 520 liters, and the fuel consumption is 9.9 liters per 100 kilometers. Available body colors include Alpine White, Oriental Blue, Titanium Silver, Silver Gray, Sapphire Black, Oxford Green, and Deep Sea Blue.
3
2
Share

What are the differences between the 2020 and 2021 BMW 5 Series?

Differences between the 2020 and 2021 BMW 5 Series: 1. Different central control screens: The 2020 model has a 12.3-inch central control screen; the 2021 model's 12.3-inch central control screen supports Carlife and Carplay systems. 2. Different functions: The 2020 model does not have OTA upgrade functionality; the 2021 model adds OTA upgrade functionality. The 5 Series is a mid-to-large-sized sedan under BMW, equipped with two engines: one is a low-power version 2.0-liter turbocharged engine, and the other is a high-power version 2.0-liter turbocharged engine. Both engines are paired with an 8AT transmission, which enhances gear-shifting smoothness and fuel economy.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.