What is the engine model of the Jeep Cherokee?

1 Answers
DiGrant
07/30/25 4:56am
The engine model of the Jeep Cherokee varies depending on the engine type: 1. The model number for the 2.0L turbocharged engine is 46338538; 2. The model number for the 2.0L naturally aspirated engine is M095. The 2.0L turbocharged engine has a maximum power output of 195kW and a maximum horsepower of 265ps, while the 2.0L naturally aspirated engine has a maximum power output of 109kW and a maximum horsepower of 148ps. The Jeep Cherokee is a mid-size SUV. Taking the 2021 Jeep Cherokee as an example, its body dimensions are: length 4669mm, width 1865mm, height 1691mm, with a wheelbase of 2707mm.
Was this review help?
16
0
Share
More Forum Discussions

Which Mercedes-Benz model comes with a clock?

Mercedes-Benz models equipped with a clock are the Maybach S-Class. Below is an introduction to the Maybach: 1. Body Dimensions: The Maybach S-Class is a D-segment executive sedan, with a length, width, and height of 5470mm, 1921mm, and 1510mm respectively. The wheelbase of this car reaches 3396mm. 2. Powertrain: This model is powered by a 3.0-liter twin-turbocharged engine, which delivers 367 horsepower and a maximum torque of 500 Nm. The engine can output maximum power at 6100 rpm and maximum torque between 1600 to 4500 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block.
10
3
Share

How to reset the maintenance light on Citroen C4L?

Citroen C4L maintenance light reset method: 1. Turn off the ignition switch of the C4L. 2. Then press and hold the mileage reset button. 3. After turning on the ignition switch, you will see the odometer start counting down. 4. When the display shows "=0" and the maintenance light goes off, it means the maintenance indicator has been successfully reset. Below are the benefits of car maintenance: 1. Regular car maintenance can improve the performance of the car and extend its service life. 2. Save fuel. According to relevant car maintenance test programs, proper car maintenance can save 11.36% of fuel during driving. 3. Reduce emissions. The same car maintenance test program shows that after overall maintenance, the CO emissions of the car during idle driving are reduced by 45.37%.
1
4
Share

Why is the Mercedes reversing radar not alerting?

The reasons why the Mercedes reversing radar is not working include damage to the reversing light switch, failure of the signal to reach the radar main unit, wiring issues, or faulty sensors. Below are the detailed reasons for the malfunctioning of the Mercedes reversing radar: Damage to the reversing light switch: This can cause the reversing radar to stop working (most reversing radars operate in conjunction with the reversing light switch. Engaging reverse gear activates the reversing light switch, supplying power to both the reversing lights and the reversing radar simultaneously). Reversing light signal not reaching the radar main unit: Check if the reversing lights are functioning properly and if the wiring is intact. Wiring issues: There may be problems with the wiring between the reversing radar controller and the sensors. Faulty sensors: The reversing radar controller or the sensors themselves may be defective.
1
4
Share

What is the difference between 1.6T and 2.0T engines in cars?

1.6T and 2.0T differences introduction: 1. Maintenance cost: The 2.0T engine requires larger turbochargers or higher turbo pressure, resulting in higher operating temperatures and pressures during engine operation. This necessitates the use of engine oil with better high-temperature resistance. Additionally, the 2.0T engine has higher demands on the cooling system, whether for air cooling or coolant cooling. Undoubtedly, the maintenance cost of the 2.0T engine is higher than that of the 1.6T in the long run. 2. Engine power: The 2.0T engine delivers stronger power with greater torque and horsepower output. However, turbocharged engines also have a drawback - insufficient power reserve compared to naturally aspirated engines. Due to limitations in boost pressure, turbocharged engines often experience power deficiency in high RPM ranges, lacking sustained acceleration capability.
16
5
Share

Is it necessary to install seat cushions in Mercedes-Benz cars?

It is necessary to install seat cushions in Mercedes-Benz cars. Here is an introduction to Mercedes-Benz related content: 1. Mercedes-Benz SAM: The control unit, also known as the Signal Acquisition and Actuation Module. If the SAM malfunctions, components such as headlights, turn signals, and wipers cannot be controlled while driving, posing a safety hazard. 2. Mercedes-Benz: A German automobile brand, considered one of the most successful premium car brands in the world. It is renowned for its perfect technical level, rigorous quality standards, innovative capabilities, and a series of classic coupe models. The Mercedes three-pointed star has become one of the most famous automobile and brand logos in the world. Mercedes-Benz cars not only have unparalleled quality but also a comprehensive range of models. Currently, it mainly produces A-Class cars, C-Class cars (mid-range sedans and sports cars), E-Class cars (high-end sedans and sports cars), S-Class cars (luxury sedans and sports cars), and G-Class vehicles (SUV off-road vehicles).
10
4
Share

What Causes a Mercedes-Benz to Fail to Start with All Dashboard Lights On?

Here are the reasons why a Mercedes-Benz fails to start with all dashboard lights on: 1. Frozen exhaust pipe: This situation is prone to occur in vehicles with very low usage frequency, such as those used for very short commutes between home and work. The water vapor from engine combustion freezes at the muffler of the exhaust pipe. If the ice from yesterday's short trip hasn't melted and today's ice forms again, it affects exhaust, and in severe cases, the vehicle cannot start. 2. Insufficient ignition energy: Poor working condition of the ignition system, especially in cold weather when the intake air temperature is low, leads to inadequate fuel atomization in the cylinders. Combined with insufficient ignition energy, this results in cylinder flooding, where excessive fuel accumulates in the cylinders, exceeding the ignition limit concentration and preventing the engine from starting.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.