What is the engine model of the Haval H4?

1 Answers
McJoshua
07/30/25 2:30am
The engine model of the Haval H4 is GW4B15, which is a 1.5-liter turbocharged engine used across the entire lineup. It delivers a maximum power of 124 kW and a maximum torque of 285 Nm. The engine reaches its peak power at 5,000 to 5,600 rpm and its peak torque at 1,400 to 3,000 rpm. The Haval H4 is positioned as a high-energy intelligent SUV, a compact SUV launched by the Haval brand targeting young customers. It measures 4,410 mm in length, 1,845 mm in width, and 1,695 mm in height, with a wheelbase of 2,660 mm. The Haval H4 is available in two versions: the LeXiang (Enjoy) edition and the ZhiLian (Smart Connect) edition, both of which are two-wheel drive.
Was this review help?
3
4
Share
More Forum Discussions

How to Adjust the Height of Motorcycle Headlights?

Simply use a screwdriver or socket to loosen the two bolts securing the headlight slightly, then apply a bit of force to move it up or down to adjust the height. You can also DIY adjust the left and right illumination range of the headlight. Slightly grind the two bolt brackets horizontally backward towards the fuel tank direction and make appropriate adjustments.
20
2
Share

How to Adjust Brake Tension?

Tighten the adjusting nut on the brake lever to its maximum (turn clockwise to the end), then prepare the brake cable. First, thread the cable and pre-tighten it on the fixing screw. Press the brake lever by hand and observe the travel of the two brake arms. Try to make the travel of both brake arms the same. The travel can be adjusted using the adjusting nut on the brake lever. Turning counterclockwise reduces the brake travel, while turning clockwise increases it.
12
5
Share

How to Step on the Accelerator for a Constant Speed?

Place the heel of your right foot on the floor of the driver's compartment as a pivot point, gently press the accelerator pedal with the ball of your foot, and use the flexion and extension of the ankle joint to press down or release. The accelerator must be coordinated with the brake and clutch, so it is essential to press lightly and release slowly, ensuring smooth and even operation. Always wear flat shoes to facilitate better control of the accelerator pedal. Remember not to drive in high heels, wedges, or other unsuitable footwear.
17
0
Share

How to Bind a Driver's License to Someone Else's Vehicle?

First, download and install the Traffic Management 12123 app, then register and bind your driver's license after installation. The vehicle interface is where you bind vehicles, divided into two categories: your own vehicle and someone else's vehicle. Select 'Someone Else's Vehicle'. After selecting someone else's vehicle, you need to fill in some basic information about the vehicle. Fill in the details according to the actual situation and then click 'Apply to Bind'.
13
1
Share

How to engage 4WD in a manual pickup truck?

There is a rotary switch on each of the front wheel axles. When selecting 4WD, turn the switch to the ON position; for 2WD, turn it to OFF. Next to the gear shift lever, there is a lever for switching between 2H and 4H. When 4WD is not in use, it should be set to LOCK. Engaging 4WD with the pickup truck's front wheels in free state can accelerate damage to the front drive gear and axle.
10
4
Share

How to Connect Motorcycle Fuel Lines?

A white plastic fuel line, similar to a negative fuel tank, connects to the lower left corner interface of the carburetor. Another line has a Y-connector, with one end connecting to the right interface of the carburetor and the other end connecting to the well in front of the carburetor. The air filter is attached to the rear part of the carburetor, and a thin tube, similar to a fuel line, is connected to the cylinder head at the front.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.