···
Log in / Register

What is the engine model of the Changan Yuexiang?

6Answers
EmmettLee
08/28/2025, 01:58:07 AM

Changan Yuexiang engine models are: JL473Q4 and JL473QF. The engine is the device that provides power for the car, determining its power, fuel economy, stability, and environmental performance. Taking the 2019 Changan Yuexiang as an example, its body dimensions are: length 4390mm, width 1725mm, height 1490mm, wheelbase 2535mm, and fuel tank capacity 40l. The 2019 Changan Yuexiang is equipped with a 1.4L naturally aspirated engine, with a maximum power of 74kW and a maximum torque of 135Nm, paired with a 5-speed manual transmission.

Was this review help?
107
Share
SadieAnn
09/10/2025, 12:20:44 AM

While researching car information, I found that the Changan Yuexiang primarily uses the JL478QEB engine model. This is a 1.5L naturally aspirated gasoline engine with smooth power delivery, making it suitable for daily commuting. Having driven this car for several years, I've found its fuel consumption well-controlled - around 7-8L/100km in city driving, dropping to about 6L on highways. The engine has been installed in models since 2018, paired with either manual or automatic transmissions for simple and worry-free operation. For maintenance, regular oil changes and air filter replacements are crucial to prolong its lifespan and reduce abnormal noises. Overall, this self-developed engine represents an economical choice with low maintenance costs and easily available spare parts, making it ideal for office workers or family use.

Was this review help?
5
Share
Expand All
CarmenDella
10/24/2025, 01:09:20 AM

I've driven quite a few Changan cars and remember that the Yuexiang series commonly uses the JL478QEB engine model, a 1.5-liter gasoline engine with around 78kW of power. This configuration performs smoothly in city driving, with quick starts and sufficient power for highways, averaging a reasonable fuel consumption of just over 7L. For maintenance, change the oil filter every 5,000 kilometers to keep it clean and avoid carbon buildup issues; if the engine model is unclear, just open the engine hood or check the owner's manual for clarity. Many veteran drivers appreciate its durability, few minor issues, and the lightweight design with an aluminum alloy cylinder block, making long drives less tiring. It's considered a reliable choice among domestic brands.

Was this review help?
13
Share
Expand All
DiNova
12/07/2025, 12:33:03 AM

Our family car is a 2019 Changan Alsvin equipped with the JL478QEB engine, a 1.5L naturally aspirated type, which provides sufficient power for daily commuting and picking up kids. The daily fuel consumption is controlled at around 7-8L, making it not a gas-guzzler, and the car is stable with simple maintenance. If you need to check the model, you can directly look at the VIN or the manual without any hassle. This engine has hardly any major repair records after several years of use, with low noise and smooth starts, making weekend trips to the suburbs comfortable.

Was this review help?
17
Share
Expand All
JanelleRose
01/27/2026, 01:48:22 AM

As an automotive enthusiast, I've studied the engines of the Changan Yuexiang, which mostly use the JL series, such as the JL478QEB, a 1.5-liter gasoline engine. It delivers a maximum output of 78kW and features VVT technology, offering good fuel efficiency. Daily driving consumes around 7L of fuel, which is significantly more economical than older models. It comes with either a manual or AMT transmission, providing responsive performance that can handle mountain roads. Additionally, this engine uses a multi-point fuel injection system, ensuring clean emissions and decent noise control. However, it's important to regularly replace the spark plugs to maintain optimal performance, prevent minor issues like unstable idling, and extend the engine's lifespan.

Was this review help?
5
Share
Expand All
VanSebastian
04/22/2026, 11:53:55 PM

We've been using the Changan Yuexiang for three to four years at home. The engine model is the standard JL478QEB, a 1.5-liter gasoline engine with a power output of around 82 horsepower, which is very practical for commuting. Fuel efficiency is key, averaging 7.5L per 100km, so even in city traffic jams, there's no need to panic. On long trips, the seats combined with the engine's vibration damping make for a comfortable ride, and kids don't get carsick in the back. For maintenance, remember to do a routine check every six months to avoid oil leaks or aging wiring—simple upkeep keeps it reliable. Overall, it's economical with plenty of space, even fitting a stroller without issues. As a means of transportation, it's trustworthy.

Was this review help?
2
Share
Expand All
More Q&A

How to Press the Clutch When Shifting Gears?

To press the clutch when shifting gears, use the ball of your left foot with the heel as the pivot point. First, press the clutch pedal all the way down, then engage the corresponding gear while lightly pressing the accelerator. Simultaneously, quickly lift the clutch to the semi-engaged position. Once you feel the clutch engage, you can fully release it. The clutch is located inside the flywheel housing between the engine and the transmission, secured to the rear plane of the flywheel with screws. The output shaft of the clutch serves as the input shaft of the transmission. Its function is to allow the driver to properly operate it, enabling the indirect engagement of the clutch's front and rear parts for smooth starting.
103
Share

How to Deal with Spark Plugs Soaked in Engine Oil?

The method to deal with spark plugs soaked in engine oil is: use paper to wipe off the oil on the spark plug, gently sand the electrodes a few times with fine sandpaper, or slightly burn the electrodes of the spark plug on the flame of a gas stove or alcohol lamp. The function of a car's spark plug is to discharge the pulsed high-voltage electricity generated by the high-voltage wire, breaking down the air between the two electrodes of the spark plug to ignite the gas in the cylinder. Methods for maintaining and servicing car spark plugs: 1. Clean the dust and impurities around the spark plug, usually by using compressed air or a fine soft tube to blow them away; 2. When removing the spark plug, ensure the engine is in a cold state and never disassemble or install the spark plug while the car engine is running; 3. After removing the spark plug, protect the installation port to prevent impurities or dust from entering the cylinder; 4. When removing the spark plug, use the correct tools, ensure the wrench fits properly, and operate it straight and correctly to avoid damaging the insulating ceramic body.
116
Share

What gear should be engaged when parking on a downhill slope?

When parking on a downhill slope, engage the reverse gear before turning off the engine to prevent the car from rolling forward. For parking on level ground, first shift to neutral, apply the handbrake, and then turn off the engine. Engaging a gear utilizes engine braking, where the wheels are connected to the engine crankshaft through gears, so wheel rotation will inevitably drive the engine. The reverse gear, fully known as the reverse driving gear, is one of the three standard gears in a car. It is marked as "R" on the gear console and is designed to allow the vehicle to move backward, serving as a special driving gear. Precautions for reversing on a downhill slope include: 1. Ensure the vehicle is completely stopped before engaging reverse gear; 2. Press the clutch pedal all the way down when shifting to reverse; 3. Maintain slow speed during reversing and avoid pressing the accelerator.
105
Share

How to Remove Asphalt Stuck on Tires?

The methods to remove asphalt stuck on tires are: 1. Spray a dedicated asphalt cleaner on the tire, and after the asphalt softens, use a small shovel to remove it, or repeatedly wipe it with a cloth; 2. Use boiling water by pouring it over the asphalt and then scrubbing repeatedly with a brush; 3. Wash the tire with soapy water and scrub repeatedly with a brush; 4. If the asphalt has been compacted over time and adheres to the tread patterns, it needs to be handled at an auto repair shop. The methods for maintaining tires include checking the tire pressure, which can be judged based on the standards in the car maintenance manual, and promptly removing any stones or foreign objects in the tires.
110
Share

Which One is the Clutch Pedal?

The clutch pedal is the first stepping point from left to right in the driver's cabin. It serves as the control device for the clutch assembly in manual transmission vehicles. Its primary function is to engage and disengage the clutch between the engine and the transmission through proper operation by the driver. The clutch consists of friction plates, spring plates, a pressure plate, and a power output shaft. When starting the vehicle, the correct operation method for the clutch is to press down the pedal, engage the gear, then lift the clutch pedal until the friction plates begin to make contact. At this point, the foot should pause briefly while simultaneously applying throttle. Once the clutch plates are fully engaged, the clutch pedal can be completely released.
106
Share

What is the difference between AT and Tiptronic?

The differences between AT and Tiptronic are: 1. Different modes: AT is an automatic transmission without a manual mode; Tiptronic has both manual and automatic modes. 2. Different practical technologies: AT can only let the computer choose the shift timing, not the driver; Tiptronic allows the driver to choose the shift timing in manual mode. 3. Different structures: AT is a hydraulic automatic transmission; Tiptronic transmission mainly consists of an ordinary gearbox, an electronically controlled clutch, an automatic shift control mechanism, and an electronic control part. AT stands for automatic transmission, also known as automatic gear. Tiptronic cars are a new type of gear shifting method that combines manual and automatic shifting.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.