What is the engine model of the BMW 3 Series?

How often does the built-in dash cam in Mercedes-Benz overwrite recordings?

Mercedes-Benz dash cam recording duration depends on the set resolution and memory card capacity, typically ranging from 3 days to a week. Time options: Dash cam loop recording settings usually offer different time intervals such as 1 minute, 2 minutes, 3 minutes, 5 minutes, and 10 minutes. After completing one segment, it automatically moves to the next. When setting the loop duration, avoid choosing intervals that are too short or too long. Function: A dash cam is a device that records images, sounds, and other relevant information during vehicle operation. After installation, it can document the entire driving process through video and audio, providing evidence for traffic accidents.

4

3

Share

Does the Corolla have automatic braking function?

The Corolla has an automatic braking function. This active braking system in the Corolla is enabled by default. The role and implementation principle of the automatic braking function are as follows: Role of the automatic braking function: This system activates only when a collision is imminent but the driver has not pressed the brake pedal. Higher-end models of the Corolla are also equipped with Level 2 autonomous driving technology, which is very user-friendly and reduces the driver's workload to some extent. Implementation principle of automatic braking: Obstacles are detected using devices such as millimeter-wave radar, lidar, cameras, infrared ultrasonic sensors, etc. The data is then fed back in real-time to an intelligent processor, which issues corresponding braking commands to the auxiliary braking system through intelligent algorithms to achieve the auxiliary automatic braking effect.

19

4

Share

Are the Position Lamp and Rear Position Lamp the Same Light?

The rear position lamp is not the same as the position lamp. Below is some related extended information: 1. Function of the rear position lamp: The rear position lamp, commonly known as the small lamp, is mainly used to indicate the presence and approximate width of the vehicle, making it easier for other vehicles to judge during overtaking or meeting. 2. Function of the position lamp: The position lamp is a warning light, usually installed at the edge of the car's roof, to indicate the width of the vehicle. The small lamp serves to alert other vehicles during evening or nighttime driving, helping them determine the relative position and size of the vehicle when meeting or overtaking.

19

0

Share

What are the steps for bleeding the brakes?

The steps for bleeding the brake fluid are as follows: 1. Press the brake pedal continuously 5 to 6 times; 2. Keep the brake pedal pressed, then immediately loosen the air screw on the right rear wheel brake caliper and quickly tighten it again; 3. Repeat this action until the brake fluid shoots out in a straight line from the air screw. Brake fluid is the liquid medium that transmits braking pressure in hydraulic braking systems, used in vehicles with hydraulic braking systems. Its characteristics are: 1. Low freezing point: It maintains good fluidity at low temperatures; 2. Extremely high boiling point: It does not create vapor lock at high temperatures; 3. Minimal quality changes: It does not corrode or soften metals and rubber.

11

5

Share

How to Judge the Quality of Car Window Tinting?

There are several methods to determine the quality of car window tinting: 1. Touch: Low-quality films use ordinary polyester film as the base material. Due to their loose internal structure, they are easily dyed, have low strength, lack elasticity and toughness, and are prone to wrinkling, failing to meet the basic requirements of automotive safety and explosion-proof films. In contrast, high-quality films use optical-grade polyester film, which is not only more expensive but also feels thick, smooth, dense, and strong, offering high safety and excellent explosion-proof performance. 2. Clarity: Better films have relatively high clarity, allowing for a clear view from both inside and outside. Low-quality car films often fail to meet transparency standards, resulting in a foggy appearance when looking out from inside, which can obscure driving vision and pose significant safety hazards. 3. Heat Insulation: Heat insulation performance is one of the key indicators of glass protective films.

16

3

Share

What causes the N13 engine vibration issue in BMW 1 Series?

Reasons for N13 engine vibration in BMW 1 Series: Engine misfire; Worn or loose engine mounts; Carbon buildup issues. Detailed explanations of these causes: Engine misfire: Engine misfire mainly refers to one or more cylinders not functioning properly, typically manifested as noticeable intermittent exhaust gas flow and severe exhaust pipe vibration. Worn or loose engine mounts: Engine mounts are rubber blocks placed between the engine and frame. Once these mounts become worn or loose, engine vibration will become abnormally severe. Carbon buildup issues: When there's excessive carbon buildup in the engine, it affects the vehicle's ignition energy, air intake efficiency, and fuel-air mixture, leading to unstable power output and vibration during both idling and acceleration.

15

4

Share

What is the engine model of the BMW 3 Series?

How often does the built-in dash cam in Mercedes-Benz overwrite recordings?

Does the Corolla have automatic braking function?

Are the Position Lamp and Rear Position Lamp the Same Light?

What are the steps for bleeding the brakes?

How to Judge the Quality of Car Window Tinting?

What causes the N13 engine vibration issue in BMW 1 Series?

What is the bulb model for MG GT headlights?

How long can a run-flat tire last after a puncture?

Where to Renew Driver's License in Fuzhou?

Where is the radiator fan fuse box located on the Chery old Flagcloud 2?