What is the engine model of the Audi RS3?

2 Answers
DiBeckett
07/25/25 10:56am
The engine model of the Audi RS3 is the EA855, with a maximum horsepower of 400, a maximum power of 294kW, and a maximum torque of 480Nm. The Audi RS3 engine is independently produced by Audi and is an imported engine. For daily maintenance of the Audi RS3 engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance will deteriorate, causing various problems for the engine. To avoid malfunctions, change the oil regularly based on usage conditions and ensure the oil level is appropriate. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may burst the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
Was this review help?
12
2
Share
WalterAnn
08/11/25 7:54pm
As an automotive enthusiast, I'm particularly fascinated by the heart of the Audi RS3 - its EA855 engine. This 2.5-liter inline five-cylinder turbocharged powerhouse delivers a ferocious 400 horsepower. The distinctive growl when driving instantly reminds me of Audi's classic Quattro heritage. The rare five-cylinder layout is full of character, perfectly balancing performance and efficiency. Maintenance isn't overly complicated - just regular oil and filter changes, unlike some high-maintenance supercar engines. Through frequent discussions with fellow enthusiasts, I've discovered its ECU can be easily upgraded to unlock even more potential, while maintaining reasonable fuel consumption of about 10L/100km in city driving and better on highways. Ultimately, this isn't just a high-performance machine - it's perfectly capable for daily commuting too, which explains why fans are so狂热 about it.
Was this review help?
18
0
Share
Expand All
More Forum Discussions

What does P stand for in a car?

P in a car stands for Park, which is a common gear position in automatic transmission models. The P gear is a special neutral position that mechanically locks the output shaft of the transmission to secure the vehicle, functioning as a parking brake to prevent the car from moving. The gear functions in a car include: 1. R gear stands for Reverse, which can be engaged by pressing the safety button on the shift lever after the car has come to a complete stop; 2. N gear stands for Neutral, where the connection between the transmission and the engine's power system is disconnected when the car is in neutral; 3. D gear stands for Drive, where the transmission automatically shifts gears when in drive mode; 4. S gear stands for Sport mode, used when going uphill or overtaking; 5. L gear stands for Low, which keeps the car in a low gear during long downhill descents, eliminating the need to constantly apply the brakes.
12
2
Share

Does an automatic transmission car have idle speed when reversing?

An automatic transmission car does have idle speed when reversing. Idle speed refers to the engine running in neutral. The method for reversing an automatic transmission car is as follows: 1. Press the foot brake firmly and shift from N to R gear; 2. Release the handbrake and observe the intended reversing path through the rearview mirror or by turning around; 3. Gently release the foot brake, always ready to press it again to park; 4. If encountering a small obstacle and the car does not move backward when the foot brake is fully released, lightly press the accelerator while being ready to immediately press the foot brake again to prevent rapid reversing and potential danger; 5. After reversing to the designated position, press the foot brake firmly and engage the handbrake before releasing the foot brake; 6. Press the foot brake and shift from R to N gear; 7. Release the foot brake to complete the reversing maneuver.
13
0
Share

How to Turn Off the Rear Wiper on a Focus?

The method to turn off the rear wiper on a Focus is: 1. Locate the knob on the side of the wiper control lever; 2. Press it to the O position to turn it off. The Focus is a compact car under Changan Ford, with body dimensions of: length 4647mm, width 1810mm, height 1468mm, and a wheelbase of 2705mm. The Focus is equipped with a 1.5L naturally aspirated engine, with an L-type cylinder arrangement and 3 cylinders, paired with a 6-speed manual transmission. It uses a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear.
4
4
Share

What is the fuel tank capacity of the BMW 5GT in liters?

The fuel tank capacity of the BMW 5GT is 70 liters. The BMW 5 Series is a mid-to-large-sized sedan under the Brilliance BMW brand. The relevant introduction to fuel tank capacity is as follows: Concept of Fuel Tank Capacity: Fuel tank capacity (L) refers to the size of the fuel tank, measuring a vehicle's ability to hold fuel. The fuel tank capacity determines the driving range. For two cars with identical engines, the larger the fuel tank, the farther the car can travel. Fuel tank capacity unit: International standards use L (liters) as the unit for calculating automobile fuel tank capacity. Different countries also have corresponding standards for automobile fuel tank capacity. Relationship between Displacement and Capacity: Depending on the car's displacement, vehicles with higher fuel consumption have larger fuel tanks, while those with lower fuel consumption have smaller tanks. Automobile fuel tank capacity is generally designed to allow a driving range of 400-600 kilometers. Lighter cars with smaller displacements have correspondingly smaller fuel tanks, while heavier cars with larger displacements naturally have larger fuel tanks. However, the maximum distance on a full tank is mostly between 400-600 kilometers. Generally, small cars have a fuel tank capacity of 35-45 liters, while mid-sized cars have a capacity of around 55-75 liters.
19
5
Share

Why is the car's power seat not responding?

The reasons why the car's power seat is not responding include: 1. Fuse blown; 2. Circuit open; 3. Seat switch failure. The solutions for a non-responsive power seat are: 1. Check if the power seat switch and seat motor are damaged; 2. Check if the circuit connectors are faulty. A car's power seat refers to a seat that uses an electric motor as the power source, adjusting various devices of the seat through transmission devices and execution mechanisms to provide comfort for the driver or passengers. The car's power seat consists of a seat cushion, backrest, headrest, frame, suspension, and adjustment mechanism. The adjustment method is: passengers only need to move the control key to adjust the seat without actively changing their sitting posture, easily finding a suitable driving position.
20
4
Share

How to Open the Car Trunk?

There are several ways to open the car trunk: 1. Use the remote key: If the car key has a remote function, simply press the trunk button; 2. Open from inside the car: There is a handle with a trunk lid icon near the driver or on the floor, pulling it will unlock and open the trunk. The function of the car trunk is to absorb and buffer part of the collision energy in rear-end accidents, reducing or minimizing passenger injuries. The car trunk is a place for storing spare items and carrying goods, including: 1. The car's spare tire; 2. The vehicle's first aid kit; 3. The onboard tool kit; 4. The triangle warning sign; 5. The fire extinguisher; 6. The car refrigerator; 7. The emergency fuel cap release cable.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.