What is the engine model of the Alphard?

Why is the GK5 considered a supercar?

GK5 is the third-generation Honda Fit. This car is referred to as a supercar because it boasts the highest horsepower in its class, and its acceleration in stock condition is even faster than the Polo GTI. Additionally, the Fit has immense modification potential, which is why many netizens call it a supercar. Reasons why the GK5 is considered a supercar: 1. Engine: The Fit is equipped with a 1.5-liter naturally aspirated Earth Dreams four-cylinder engine, which produces 131 horsepower and 155 Nm of maximum torque in stock condition. This engine delivers peak torque at 4,600 rpm and maximum power at 6,600 rpm. It features Honda's i-VTEC technology and direct fuel injection. 2. Transmission: The CVT transmission used in the car ensures almost no jerking during gear shifts.

18

1

Share

Can a car still run if the exhaust pipe is submerged in water?

Can a car still run if the exhaust pipe is submerged in water? It should drive at a low and steady speed because constantly changing the throttle can cause fluctuations in exhaust pipe pressure. Additionally, as the water level rises, it may enter the intake pipe and air filter, causing the engine to stall immediately. This kind of stall has more severe consequences, as water entering the cylinders can hydrolock the engine, leading to mechanical damage. After driving through water, do not accelerate immediately; allow the water in the wheels to drain and test the brakes to ensure safety. For safety reasons, do not blindly drive through flooded roads. Understand the water depth and road conditions, and be familiar with your car's specifications, as different vehicles have varying heights for the air intake, air filter locations, and critical electrical component designs. Use low-beam headlights in rainy weather, and in heavy rain, turn on the front and rear fog lights. Avoid using high-beam headlights in rain or fog, as their angle can cause significant light scattering, reducing their effectiveness in such conditions.

5

3

Share

What are the tips for the 2021 Subject 4 exam?

Here is the relevant introduction to the tips for Subject 4: 1. Activate high beam: Activating high beam is always wrong, activating hazard warning flashlights is always correct, turn on the left turn signal when entering the highway, turn on the right turn signal when exiting the highway, 'do not turn on the signal when entering the roundabout, turn on the right turn signal when exiting the roundabout'. 2. Braking on slopes: brake early when going downhill, brake late when going uphill. Meeting on slopes: downhill yields to uphill (if the downhill vehicle has traveled halfway, uphill yields). 3. Wheel skidding problem: turn the steering wheel in the opposite direction for front wheel skidding, turn the steering wheel in the same direction for rear wheel skidding. In summary, it's opposite for the front and same for the rear. If the question does not specify front or rear wheel, assume it's rear wheel skidding. 4. The ABS anti-lock braking system maintains steering ability, you can step on the brake pedal hard, emergency braking while steering simultaneously will cause skidding.

3

2

Share

Is the Besturn B70's engine the same as the Mazda 6's?

The engine of the Besturn B70 is not the same as the Mazda 6's. The Besturn B70 2.0L and 1.8T sport models are equipped with the ET3 series high-performance all-aluminum engine and the 4GC series high-performance turbocharged engine, respectively. The Mazda 6 is equipped with 2.0-liter and 2.3-liter inline four-cylinder engines. The introduction of the Besturn B70's engine is as follows: Engine horsepower: With 169 horsepower and a maximum torque of 258 Nm, this engine has a maximum power speed of 5500 rpm and a maximum torque speed ranging from 1300 to 4350 rpm. This engine is equipped with direct injection technology and uses an aluminum alloy cylinder head. Using an aluminum alloy cylinder head can reduce the weight of the engine, thereby improving the car's handling and fuel efficiency. Dual-clutch transmission: This engine is paired with a 7-speed dual-clutch transmission. Using a dual-clutch transmission can improve the car's shifting speed and transmission efficiency. The dual-clutch transmission is a product developed based on the manual transmission, and its structure is similar to that of a manual transmission. One set of clutches in the dual-clutch transmission is used to control the odd-numbered gears, while the other set is used to control the even-numbered gears.

20

5

Share

How to Disassemble the Teana Key?

The method to disassemble the Teana key is to open the folding part of the key, insert a flat-head screwdriver into the horizontal groove in the recess, making sure to press firmly, then use a deft motion to twist the screwdriver. Once a larger gap is created, pull the key ring below with force, and the key will separate into upper and lower parts, thus completing the disassembly. The Teana is a mid-to-high-end luxury sedan under the NISSAN brand. In terms of exterior design, it continues the current model's styling, featuring a V-Motion front grille, sharp-angled headlights on both sides, a trapezoidal air intake below, and a shovel-shaped front lip design beneath the fog lights. The 2020 Teana measures 4901mm in length, 1850mm in width, 1447mm in height, with a wheelbase of 2825mm.

3

4

Share

How to Reset the Car Tire Pressure Warning?

There are generally three methods to reset the car tire pressure warning. First, check and confirm whether the tire pressure is normal. If there is an issue, adjust it to the standard pressure. Second, have the tire pressure sensors inspected at an auto repair shop. After confirming normal tire pressure, clear the fault code. Third, locate the setup button on the central console for manual reset, typically by pressing the 'set' key. If the tire pressure warning light illuminates while driving due to low pressure, immediately reduce speed, avoid sudden steering or braking, and find a safe place to stop and inspect the tires. Both excessively low or high tire pressure can trigger the warning light. When the tire pressure light comes on, promptly restore the pressure to normal levels and deactivate the tire pressure monitoring warning light. The warning light can be triggered by various situations: Punctured tire; Excessive tire pressure; Prolonged driving with low pressure; Tires losing pressure over time without inflation. When tire pressure is too low, the increased deformation during ground contact enlarges the tire's footprint, raising rolling resistance and making steering heavier. During high-speed driving, if the compressed tire section cannot fully rebound, it manifests as pronounced wavelike deformation along the tire's rear contact circumference, accompanied by sharply increased rolling resistance, potentially leading to rubber delamination or even blowout damage.

3

5

Share

What is the engine model of the Alphard?

Why is the GK5 considered a supercar?

Can a car still run if the exhaust pipe is submerged in water?

What are the tips for the 2021 Subject 4 exam?

Is the Besturn B70's engine the same as the Mazda 6's?

How to Disassemble the Teana Key?

How to Reset the Car Tire Pressure Warning?

What is the best engine oil for the Honda Vezel 1.5?

What is the fuel consumption of the Volkswagen Viloran?

What is the correct method for installing a license plate?

What transmission does the GM6 use?