What is the engine model of the 2021 Audi A6L?

2 Answers
OSkylar
07/29/25 5:52pm
The 2021 Audi A6L is equipped with three engine options: the 2.0T low-power version with engine model DKU, the 2.0T high-power version with engine model DKW, and the 3.0T engine with model DLZ. Additional information: 1. Transmission of the Audi A6L: The Audi A6L engine is paired with a 7-speed DSG transmission as standard across all models, while the 45TFSI and 55TFSI variants also feature the quattro-ultra intelligent all-wheel-drive system, achieving a balance between fuel efficiency and off-road capability. 2. Features of the Audi A6L: The new Audi A6L comes standard with tire pressure monitoring, a non-full-size spare tire, LED headlights/taillights, progressive steering system, front seat power adjustment with lumbar support, Audi Virtual Cockpit, cruise control, front/side airbags + curtain airbags, auto start-stop, and Audi Connect technology.
Was this review help?
8
1
Share
VanRiver
08/14/25 9:38am
Speaking of the engine models of the 2021 Audi A6L, as someone who has driven this car, I’d like to share my thoughts. Back then, I test-drove the 45TFSI version, which features a 2.0-liter turbocharged engine. I recall it being part of the EA888 series, with around 245 horsepower. The acceleration response was quick, and the drive felt smooth. The other variant, the 55TFSI, comes with a 3.0-liter V6 turbocharged engine, model EA839, delivering 340 horsepower—the push-back feeling is particularly strong, making it ideal for those who love a sense of speed. Audi’s tuning is quite smart, and the fuel efficiency is impressive. My daily commute averaged under 9L per 100km, and paired with the 7-speed dual-clutch transmission, gear shifts were seamless without any jerking. Maintenance is straightforward too, with extended oil change intervals, and the engine has been trouble-free. Choosing between them mainly depends on whether you prioritize fuel economy or performance—both models are worth a try.
Was this review help?
18
0
Share
Expand All
More Forum Discussions

What Causes the Hood Resonance Noise?

The causes of hood resonance noise include engine issues, shield plate problems, and control system malfunctions. Engine Aging: If the vehicle has been in use for a long time, the rubber of the engine mounting pads may fatigue and age due to high temperatures, easily leading to resonance. In severe cases, there may also be bumping and friction noises. Engine Misfire: Engine misfire can also cause resonance phenomena in the engine. Shield Plate Deformation: Deformation of the engine shield plate or improper installation can cause engine resonance. This situation is relatively common and easy to resolve. Control System Issues: Another possible cause is vehicle resonance due to problems with the idle control system.
2
5
Share

What is the safety device of the transmission operating mechanism?

There are two types of safety devices for the transmission operating mechanism: the self-locking device and the interlocking device. The following is their introduction: 1. The self-locking device of most transmissions consists of a self-locking steel ball and a self-locking spring. 2. The interlocking device is mainly composed of interlocking steel balls and interlocking pins, that is, elements such as balls, pins, and sliders are added between the shift fork shafts, or elements such as frame plates are set to limit the movement trajectory of the shift lever and also prevent the engagement of two gears simultaneously. 3. The upper surface of each shift fork shaft has three grooves distributed along the axial direction. When any shift fork shaft moves axially to the neutral or a working gear position, one groove must be exactly aligned with the self-locking steel ball.
15
5
Share

How Much Torque Can a Dual-Clutch Transmission Withstand?

Dual-clutch transmissions can withstand 250 torque. Cool the transmission promptly: Dual-clutch transmissions are not suitable for frequent starts, prolonged low-speed driving, or stop-and-go traffic, as they are prone to overheating, which can lead to malfunctions. Once the vehicle's computer issues a warning, it is essential to stop immediately to cool down the transmission. Use lower gears: In unavoidable traffic congestion, try to use lower gears for following the traffic, including manual mode or S mode. This can significantly prevent the clutch from overheating due to the transmission's shifting mechanisms constantly changing.
7
0
Share

Is the Right Reverse Parking Narrowing Due to Steering Too Early or Too Late?

The reason for the right side narrowing during right reverse parking is steering the wheel too early. Here are the precautions for reverse parking: To perfectly enter the parking space during reverse parking: The timing of turning the steering wheel clockwise is crucial—it should be neither too early nor too late. If steered too early, it's easy to hit the right parking line; if too late, it's easy to hit the left parking line. This requires accurate judgment. Keep the speed slow: During reverse parking, the most important thing is to maintain a slow speed. If there's any deviation while reversing, the car's body may tend to touch the line. Timely detection allows for corrections, such as promptly straightening the steering wheel. However, if driving too fast, there won't be enough time to make adjustments.
12
0
Share

What brand of nanny vans do celebrities use?

Celebrity nanny vans are typically the Toyota Alphard. Introduction to Toyota's main vehicle models: Corolla, Camry, ES, Avalon, RAV4, Highlander, etc. Among these, the nanny van model is generally the Toyota Alphard. Industries Toyota is involved in: Toyota's product range spans automobiles, steel, machine tools, pesticides, electronics, textile machinery, fiber products, household goods, chemicals, chemical engineering, construction machinery, and the construction industry. In 1993, its total sales ranked 5th among industrial companies worldwide. The company produced 4.45 million vehicles that year, accounting for 9.4% of the global automotive market.
2
4
Share

How to use the auto switch for car windows?

To use the auto function for car windows: Simply press the window open or close button once, and the window will open or close automatically without the need to hold the button down. 'Auto' translates to 'automatic' in English. The car function buttons with auto include the following 6 features: 1. Automatic air conditioning: Press the AUTO button to activate the automatic air conditioning. After manually setting the temperature, the system enters an automatic temperature regulation state, controlling the air direction, blower speed, compressor operation, and vent temperature to maintain a comfortable cabin temperature. 2. Automatic headlights: Rotate the light switch to align with the AUTO mark, and the light control enters automatic mode. In this mode, a light sensor on the dashboard detects low external light conditions, such as entering tunnels, underground parking lots, or unlocking the car at night, and automatically turns on the daytime running lights or headlights to prevent delays or forgetting to turn them on. 3. Automatic wipers: Move the wiper switch to the AUTO position to activate automatic mode. A sensor on the windshield detects rainfall intensity, and the system automatically adjusts the wiper speed. 4. AUTOHOLD: This is the automatic parking function. Press the AUTOH button to turn on the system (indicated by the button light). When the vehicle frequently stops and starts, activating this function allows the system to automatically hold the brake after pressing it for more than 3 seconds, eliminating the need to keep the brake pedal pressed. To move forward, simply press the accelerator, and the parking system will release automatically. 5. Automatic anti-glare: This feature usually doesn’t have an AUTO label, but an indicator on the rearview mirror signifies its presence. During night driving, if a following vehicle shines bright lights or high beams, the system automatically adjusts the reflection to prevent glare and maintain visibility. 6. One-touch up/down: The auto button on the driver’s side window switch indicates that pressing or pulling the switch once will automatically raise or lower the window completely without holding the button. To stop the window during operation, press the switch again.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.