What is the engine model of the 2009 Geely Vision?

2 Answers
SanAriana
07/29/25 11:16pm
The engine model of the 2009 Geely Vision is JL4G15D. The 2009 Geely Vision is equipped with a 1.5L engine with 4 cylinders arranged in an L configuration. The cylinder bore is 78.7mm, the stroke is 77mm, and it features natural aspiration. The 2009 Geely Vision is Geely's first mid-level business-family sedan, with a body length of 4602mm, width of 1725mm, height of 1485mm, wheelbase of 2602mm, front track of 1482mm, rear track of 1462mm, and a fuel tank capacity of 50L. The overall design of the 2009 Geely Vision adopts the Geely family-style design language, featuring the family-inspired water ripple grille paired with a blade-style hood and shark-mouth lower grille. The vehicle is equipped with integrated high/low beam headlights, with the eyebrow line seamlessly blending into the grille design.
Was this review help?
8
1
Share
SanEmilio
08/16/25 1:36am
I remember the main engine model of the 2009 Geely Vision was the JL4G18, a 1.8L displacement four-cylinder engine with a power output of around 125 horsepower. It responds quite sensitively for daily driving, especially with sufficient torque at low RPMs, making it suitable for city commuting. As a self-branded powertrain, its design is relatively mature, based on Mitsubishi technology. Fuel consumption is controlled at 8-9L/100km—not the most fuel-efficient but cost-effective. Noise becomes noticeably louder on highways, something you’ll need to get used to. For maintenance, it’s recommended to check the engine oil and air filter every 5,000 kilometers to avoid carbon buildup affecting performance. Overall, while this engine isn’t top-tier, it justifies its price point. Common minor issues after seven or eight years of use include occasional idle instability, but most owners can handle it, and repair costs are low, making it a reliable choice for an economical car.
Was this review help?
20
2
Share
Expand All
More Forum Discussions

How to Adjust Rightward Pull?

Rightward pull can be adjusted through wheel alignment. During driving, vehicles inevitably experience impacts, which can cause deviations in wheel alignment after the tires are hit. The supporting components of the car chassis may undergo slight deformations due to bumps or vibrations. Wheel alignment is an effective method to address vehicle pulling. Wheel alignment is based on the four-wheel parameters of the vehicle, adjusting them to ensure good driving performance and certain reliability. The installation of the steering wheels, steering knuckles, and front axle in a car has specific relative positions. This installation with specific relative positions is called steering wheel alignment, also known as front wheel alignment. Front wheel alignment includes four aspects: caster angle, kingpin inclination angle, camber angle, and toe-in.
5
3
Share

How Long Does It Take to Fully Charge an Electric Vehicle?

It takes approximately 1 to 1.5 hours to fully charge an electric vehicle. The charging time depends on the type of battery used in the vehicle and its capacity. Generally, fast charging for electric vehicles can charge 50% of the battery in 30 minutes, and a full charge takes 1 to 1.5 hours. Slow charging, on the other hand, requires 6 to 12 hours for a full charge. Electric vehicles, also known as EVs, use electricity as their power source and are driven by electric motors. They are classified as new energy vehicles, including pure electric vehicles, hybrid electric vehicles, and fuel cell electric vehicles, which have a relatively smaller environmental impact compared to traditional vehicles. The core components of an electric vehicle are the drive motor, speed controller, power battery, and onboard charger, collectively referred to as the four major components.
14
4
Share

Can Car Engine Oil Be Used in Motorcycles?

Car engine oil can be used in motorcycles, but its grade must match the specifications in the motorcycle manual. Engine oil is the lubricant used in engines, composed of base oil and additives. It serves functions such as lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, and shock absorption, earning it the nickname 'the blood of the car.' Base oil is the primary component of lubricants, determining their fundamental properties, while additives compensate for and enhance the deficiencies of base oil, providing additional performance characteristics. These additives are a crucial part of lubricants. The quality grade of engine oil, also known as the performance grade, is an important basis for selecting the appropriate lubricant.
17
1
Share

How to Repair a Jammed Seat Belt?

Repair methods for a jammed seat belt: 1. The seat belt retractor mechanism needs to be disassembled and replaced. Inside the seat belt retractor mechanism, there are some components that, if faulty, can cause the seat belt to jam, making it impossible to pull out or retract; 2. When the seat belt jams during rapid pulling, slowly pulling the seat belt can resolve the issue; 3. If the seat belt does not jam when pulled quickly, it indicates that the seat belt has failed and needs immediate repair. The function of the seat belt is to instantly tighten during a vehicle collision or when emergency braking is applied, securing the occupant firmly in the seat to prevent secondary collisions.
11
5
Share

How to Fold Electric Rearview Mirrors?

Electric rearview mirrors can typically be folded automatically using an operation button located on the driver's side door or the car's center console. Some models automatically unfold the mirrors when the vehicle is started. As the widest component installed on a vehicle, rearview mirrors are prone to impact in case of side collisions. To minimize scratches, rearview mirrors are equipped with a folding function. Mirrors with this feature can be retracted when passing through narrow sections, improving the vehicle's passability. When the driver leaves the car, folding the mirrors not only protects the mirror surface but also reduces parking space, effectively avoiding scratches.
18
4
Share

How to reset the tire pressure light on a Buick Excelle?

Buick Excelle tire pressure light reset method: The tire pressure needs to be adjusted to the standard value, and the tire pressure system must be matched. The specific matching method is to adjust the tire pressure to the standard, then drive at a constant speed of 40km/h for about 10 minutes. When the matching is completed, the tire pressure light will automatically turn off. The tire pressure monitoring light indicates that the tire pressure of the vehicle exceeds the normal level, which could be due to a punctured tire, excessive tire pressure, prolonged driving with low tire pressure, or decreased tire pressure from long periods without inflation. The Buick Excelle has a body length, width, and height of 4609mm, 1798mm, and 1486mm respectively, with a wheelbase of 2640mm. Its engine has a maximum power of 120kw and a maximum torque of 230nm.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.