What is the engine displacement of the Trumpchi GA6?

Where is the cabin air filter of the Lynk & Co 02 located?

The cabin air filter of the Lynk & Co 02 is located behind the glove box on the passenger side. According to the manufacturer's requirements, it should be replaced every two years or 24 months, but the actual replacement cycle depends on the condition of the filter. The functions of the cabin air filter are: 1. Provide fresh air for the cabin; 2. Ensure safety and hygiene in the cabin; 3. Absorb harmful substances; 4. Filter solid particles in the air. Taking the 2021 Lynk & Co 02 as an example, it is a compact SUV with the following dimensions: length 4448mm, width 1890mm, height 1528mm, wheelbase 2702mm, minimum ground clearance 201mm, and curb weight 1475kg.

15

0

Share

Can a newly purchased car run on the highway?

Can a newly purchased car run on the highway? It is possible, but you need to control the speed and engine RPM. Precautions for driving on the highway include: 1. The driver and front-seat passenger should fasten their seat belts, and the driver should not answer phone calls; 2. Avoid sudden steering wheel movements while driving at high speeds; 3. Do not change lanes arbitrarily while driving. When changing lanes or overtaking the vehicle in front, you must turn on the turn signal in advance; 4. When overtaking, only use the adjacent lane. After overtaking, immediately return to the driving lane. Do not ride or drive on the lane divider; 5. Do not reverse, drive in the opposite direction, make U-turns or turns by crossing the central divider, do not test drive or operate a training vehicle, and do not overtake or park on the ramp; 6. Maintain a distance of at least 100 meters between vehicles. When the speed is below 100 km/h, the distance from the vehicle in front in the same lane can be appropriately shortened.

19

2

Share

What are the solutions for black paint marks on a white car?

The solutions for black paint marks on a white car are: 1. Wipe in a straight line with a compound; 2. Repair with nail polish that matches the car's color or is transparent; 3. Remove through wet sanding, polishing, and waxing; 4. Wipe with thinner and a soft cloth; 5. Use essential balm to wipe. Methods for maintaining car paint include: 1. Wash the car after the engine has cooled down; 2. Reduce exposure to direct sunlight; 3. Clean stains on the car body promptly; 4. Rinse with clean water after rain to prevent acid rain corrosion; 5. Apply wax or glaze. The functions of car paint are: 1. Protect the car from erosion by various atmospheric corrosive agents; 2. Decorate the car; 3. Identify the type of car; 4. Improve comfort and sealing, preventing noise caused by vibration.

3

2

Share

Where is the NIO ES8 produced?

The NIO ES8 is produced in Hefei, China. It is a mid-to-large-sized SUV. Taking the 2020 NIO ES8 as an example, its body dimensions are: length 5022mm, width 1962mm, height 1756mm, with a wheelbase of 3010mm and a curb weight of 2425kg. The 2020 NIO ES8 features a front double-wishbone independent suspension and a rear multi-link independent suspension. It is equipped with a front permanent magnet synchronous motor and a rear AC asynchronous motor, with a combined motor power of 400kW and a combined motor torque of 725Nm. It is paired with a single-speed fixed gear ratio transmission.

8

2

Share

What is the method for selecting car antifreeze?

The method for selecting car antifreeze is: 1. Choose antifreeze that matches the vehicle model; 2. Smell the antifreeze to ensure it has no unusual odor. The steps for replacing antifreeze are: 1. Open the vehicle's engine hood, and the antifreeze reservoir can be seen in the upper right corner; 2. Open the antifreeze drain plug under the radiator to drain the old antifreeze; 3. Add new antifreeze, tighten the cap, and the antifreeze replacement is complete. The functions of antifreeze are: 1. To provide anti-corrosion protection for the engine's cooling system; 2. To prevent the engine water from boiling when the temperature reaches 100 degrees Celsius; 3. To prevent the formation of scale, avoiding a reduction in the radiator's cooling efficiency; 4. To ensure the engine operates normally under low-temperature conditions.

5

0

Share

What type of bulbs does the 10th-generation Civic use?

The 10th-generation Civic uses the following bulbs: 1. The high beam headlight is a 60w halogen bulb with the model number HB3; 2. The low beam headlight is a 55w halogen bulb with the model number H11. The replacement method for the 10th-generation Civic bulbs is: 1. Press the tab to remove the coupler; 2. Turn the old bulb counterclockwise and remove it; 3. Insert the new bulb into the headlight assembly and turn it clockwise; 4. Insert the coupler into the bulb connector. The 10th-generation Civic features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 1.5L turbocharged engine, producing a maximum horsepower of 177ps, a maximum power of 130kw, and a maximum torque of 220nm, paired with a continuously variable transmission.

13

5

Share

What is the engine displacement of the Trumpchi GA6?

Where is the cabin air filter of the Lynk & Co 02 located?

Can a newly purchased car run on the highway?

What are the solutions for black paint marks on a white car?

Where is the NIO ES8 produced?

What is the method for selecting car antifreeze?

What type of bulbs does the 10th-generation Civic use?

Can the original 4-ohm speaker be replaced with a 2-ohm one?

What is the function of a car's clutch?

How to check the tire pressure monitoring on Honda CR-V?

Where are the brake and accelerator located in a car?