What is the engine displacement of the Lexus ES?

What does the vehicle nameplate refer to?

Vehicle nameplate refers to the Vehicle Identification Number (VIN). Below is relevant information: 1. VIN: Contains vehicle origin, brand, series, model, year, displacement, seating capacity, suggested retail price, model code, fuel type, transmission type, engine model, engine maximum power, etc. All these details are encoded in the 17-character VIN. 2. Meaning: The first part represents the World Manufacturer Identifier (WMI). The second part is the Vehicle Descriptor Section (VDS). The third part is the Vehicle Indicator Section (VIS). The VIN consists of English letters and Arabic numerals. To prevent confusion in writing, the three letters "IQO" are not used, leaving a total of 33 symbols available for vehicle identification.

2

Share

Who is responsible if the towing damages the vehicle?

What unit is responsible for the damage caused by towing the vehicle? In the entire incident, the towed vehicle bears no responsibility. According to Article 93 of the Road Traffic Safety Law, the traffic management department of the public security organ may impose fines on motor vehicle drivers who violate regulations and tow the vehicles. Traffic police are responsible for vehicle damage caused during enforcement towing: If traffic police cause vehicle damage due to improper operation during enforcement towing, the responsibility lies with the traffic police. According to Article 93 of the Road Traffic Safety Law, for violations of laws and regulations regarding motor vehicle parking or temporary parking, the traffic police may point out the violation, issue a verbal warning, and order immediate departure; if the motor vehicle driver is not present or refuses to leave immediately, obstructing the passage of other vehicles or pedestrians, a fine may be imposed, and the vehicle may be towed to a location that does not obstruct traffic or to a location designated by the traffic management department of the public security organ; the traffic management department of the public security organ must not charge the party for towing and should promptly inform the party of the parking location. Towing companies are responsible for damage caused during towing: If a towing company causes damage to a motor vehicle due to improper towing methods, it must bear compensation responsibility according to the law; for example, if the vehicle is scratched or the bumper is damaged during towing, the towing company is responsible for covering the repair costs; however, it is necessary to retain certain evidence to prevent the other party from denying responsibility.

8

1

Share

How Long After Touch-Up Painting Can the Car Be Picked Up?

Car touch-up painting takes two to three hours before the vehicle can be picked up. Below are detailed introductions to car paint maintenance: 1. Waxing: Waxing forms a protective wax layer on the car's surface, isolating the paint from external elements, thereby protecting the paint and preventing oxidation and fading. New cars do not require waxing within the first three months of purchase, and excessive waxing afterward can damage the paint. It is recommended to wax no more than once every two months. When waxing, apply evenly and maintain a consistent direction. 2. Crystal Coating: Crystal coating creates a robust fiber network on the paint surface, filling microscopic pores invisible to the naked eye, achieving a mirror-like effect. It adds a thin diamond-hard shell to the paint, further enhancing the hardness of the original coating and protecting the paint from damage.

20

3

Share

Where is the choke on a scooter?

The choke on a scooter is automatic, which is an electronically controlled enrichment valve installed on the carburetor. It is a black plastic component with wires next to the carburetor. This 'choke' is controlled by temperature and current, requiring no manual operation. When the engine is turned off, the power supply to the 'choke' stops, and after a while, it automatically opens the enrichment nozzle. Upon restarting, the carburetor will automatically provide a richer air-fuel mixture, equivalent to pulling the choke. Once the engine starts running, it begins supplying power to the 'choke,' causing it to close quickly. At this point, the carburetor starts providing a normal-concentration air-fuel mixture. The function of the choke: Also known as the air choke, it operates on two principles. One is to reduce air flow during cold starts, and the other is to increase fuel flow. Both methods ultimately provide the engine with a richer air-fuel mixture, which is beneficial for easier engine starts in cold conditions. The choke automatically opens when the engine is cold and closes once the engine warms up. Motorcycles control the air intake to reduce the air ratio. Therefore, if you are not in a hurry to ride, it is advisable to let the motorcycle idle for 1-2 minutes to allow better control of the air intake.

19

1

Share

How to Use the Service Brake When Parking a Motor Vehicle on a Downhill Slope?

When parking a motor vehicle on a downhill slope using the service brake, you should apply the brake earlier than you would on a level road. When driving downhill, the vehicle's speed gradually increases due to gravity, resulting in a longer braking distance compared to a level road. Therefore, braking should be initiated earlier. Here is some relevant information: 1. Regarding uphill slopes: When parking on an uphill slope, braking should be delayed compared to a level road. This is because the vehicle's speed naturally decreases due to the slope resistance, resulting in a shorter braking distance. Thus, braking should be delayed. 2. Normal driving: During driving, the service brake (foot brake) is typically used to slow down or stop the vehicle while moving forward. Once the vehicle comes to a complete stop, the parking brake (hand brake) should be engaged to prevent the vehicle from rolling forward or backward.

9

1

Share

How to Get the Car Back When It's Repossessed Due to Unpaid Auto Loan?

Review the car purchase contract to see if it specifies the measures for overdue payments. Generally, the car will be repossessed first, followed by a demand for high-interest payments. After carefully reading the contract, visit the lending institution to negotiate repayment terms with the responsible person. Some necessary protective measures must be taken.

13

0

Share

What is the engine displacement of the Lexus ES?

What does the vehicle nameplate refer to?

Who is responsible if the towing damages the vehicle?

How Long After Touch-Up Painting Can the Car Be Picked Up?

Where is the choke on a scooter?

How to Use the Service Brake When Parking a Motor Vehicle on a Downhill Slope?

How to Get the Car Back When It's Repossessed Due to Unpaid Auto Loan?

What are the test items for the manual transmission in Subject 2?

Where to Apply for a Driver's License Renewal?

What should be noted when driving a motor vehicle on icy and snowy roads?

What are the length, width, and height of a 9.6-meter vehicle?