···
Log in / Register

What is the engine displacement of the BMW 530?

4 Answers
VioletRose
07/30/25 2:59am

BMW 530 has a displacement of 2.0L, equipped with a high-power 2.0T turbocharged engine. The maximum power output is 185kW, and the maximum torque is 350Nm. The powertrain is paired with an 8-speed automatic transmission. Compared to the N20 engine, this engine features certain technical improvements, including a water-cooled intercooler, shorter intake pipe length, and a more compact engine design. The dimensions of the BMW 530 long-wheelbase version are 5087mm in length, 1868mm in width, and 1500mm in height, with a wheelbase of 3108mm. It comes with features such as passive pedestrian protection, run-flat tires, fatigue driving alert, power trunk, active grille shutters, steering wheel memory, and a full LCD instrument panel.

Was this review help?
14
0
Share
Aaron
08/16/25 9:22am

The BMW 530 typically has a displacement of 2.0 liters. I've used this car for a while, and the engine is quite intelligently designed—it's a four-cylinder turbocharged type with a specific displacement of 1998cc. I previously drove the older six-cylinder version, but modern models have shifted to smaller displacements, significantly improving fuel efficiency. In urban driving, the fuel consumption is around 9 liters per 100 kilometers, and even lower on highways, saving a considerable amount of money each month. Technically, the turbocharging provides ample torque at low RPMs, ensuring quick acceleration without lag. The car responds swiftly, and the engine remains quiet during city traffic, enhancing comfort. BMW's adjustments aim to align with environmental trends, reducing emissions and helping lower taxes, making it more cost-effective at purchase. Overall, the 2.0-liter displacement combined with intelligent tuning makes the 530 an efficient and practical luxury car without compromising performance.

Was this review help?
18
0
Share
Expand All
McFinn
10/22/25 2:44am

When commuting daily with a BMW 530, its engine displacement is 2.0 liters, featuring a four-cylinder turbocharged engine with an actual capacity of 1998cc. The power output is sufficient, making city driving effortless, and fuel efficiency is a key highlight, with a fuel consumption of approximately 9-10 liters per 100 kilometers. Compared to larger-displacement vehicles, this can save you around a thousand dollars in fuel costs annually. The engine response is smooth, with ample low-end torque, ensuring quick starts at traffic lights and effortless highway cruising. In terms of safety, the smaller displacement is complemented by a vehicle stability system, eliminating the risk of losing control during lane changes or overtaking. It is recommended to regularly maintain and check the engine oil and filters to prevent overheating. Additionally, the smaller displacement contributes to environmental friendliness, meeting emission standards and reducing pollution. This makes it a practical and cost-effective choice, ideal for family use or daily commuters, offering high long-term value for money.

Was this review help?
16
2
Share
Expand All
StRachel
12/05/25 3:06am

The BMW 530 has a 2.0-liter displacement, featuring a four-cylinder turbocharged engine with a displacement of 1998cc. This car delivers strong power, ample horsepower, and quick acceleration, making it exciting whether cruising in the city or speeding on the highway. Fuel consumption is well-controlled, averaging around 9 liters per 100 kilometers, which is economical and environmentally friendly, making insurance and taxes affordable for young people. The compact engine design ensures agility, easy parking, and low engine noise, making it suitable for gatherings or short trips. Its performance rivals older models, offering both prestige and practicality.

Was this review help?
20
5
Share
Expand All
More Forum Discussions

How much weight can the Volkswagen Tiguan L trunk carry?

The Volkswagen Tiguan L trunk can carry over 800 jin. Impact on tire wear and changes: Car tires are designed and produced based on the total weight of the vehicle, with a considerable safety factor reserved. However, when the car is overloaded, the tires will bear excessive weight and deform. This also increases friction, leading to a shortened tire lifespan. Shortening the vehicle's service life: Overloading shortens the vehicle's service life and accelerates the aging of components. The load limit of a car is determined during manufacturing, and overloading will alter the original design parameters. For example: loose rivets, detached fastening screws, and deformation of the overall frame. Overloading reduces the vehicle's service life and accelerates the aging of rubber and plastic components.
5
0
Share

Where is the tire pressure reset button for the Kia K5?

The Kia K5 does not have a tire pressure reset button, meaning it cannot be manually cleared. After stabilizing the tire pressure in all four wheels, you need to drive approximately 10 kilometers for the warning to automatically disappear. The Kia K5 is a mid-size sedan with body dimensions of 4845mm in length, 1830mm in width, and 1460mm in height, with a wheelbase of 2795mm. In terms of power, the Kia K5 is equipped with a 2.5T four-cylinder turbocharged engine, delivering a maximum power of 216 kW and a peak torque of 421 Nm, paired with an 8-speed dual-clutch transmission. Externally, the Kia K5 features the brand's signature tiger-nose grille with a wavy black air intake grille.
13
0
Share

What's the reason for the GAC Trumpchi GS3 not starting?

GAC Trumpchi GS3 not starting reasons are as follows: Use appropriate engine oil: In winter, as the temperature drops, the viscosity of the engine oil increases, making it harder to flow, which in turn increases engine resistance. If starting is difficult, check whether the engine oil grade used is incorrect. Replace spark plugs in time: After several years of use, spark plugs are prone to problems such as carbon deposits, leakage, excessive gap, and erosion, which can make it difficult to start the car, cold start, or even engine start, often requiring multiple ignition attempts. Therefore, when the vehicle reaches a certain mileage or if you experience difficulty starting, weak driving, shaking, increased fuel consumption, or unexplained stalling, check the condition of the spark plugs and replace them in time.
1
4
Share

Can the Jetta Carry 1000 Jin?

The Volkswagen Jetta cannot carry a load of 1000 jin. Shortening the Vehicle's Lifespan: Overloading reduces the vehicle's lifespan and accelerates the aging of components. The load capacity of a car is determined during manufacturing, and exceeding this limit alters the original design parameters. For instance, it can cause rivets to loosen, fastening screws to fall out, and the entire frame to deform. Overloading shortens the vehicle's service life and hastens the aging of rubber and plastic parts. Increasing Tire Wear and Changes: Car tires are designed and manufactured based on the vehicle's total weight, with a considerable safety margin. However, when a car is overloaded, the tires bear excessive weight, leading to deformation. This also increases friction, resulting in a shorter tire lifespan.
13
4
Share

How to Turn Off the Air Conditioning When Starting a Porsche 718?

To turn off the air conditioning when starting a Porsche 718, follow these steps: 1. Adjust the air conditioning to the off position and press the set button; 2. Upon hearing a sound, the air conditioning will remain off the next time you start the car. The Porsche 718 is Porsche's entry-level sports car, with body dimensions of 4379mm in length, 1801mm in width, and 1276mm in height, and a wheelbase of 2475mm. In terms of power, the Porsche 718 lineup is equipped with two turbocharged engines: a 2.0T and a 2.5T. The 2.0T engine delivers a maximum horsepower of 250, while the 2.5T engine produces a maximum horsepower of 350. Both the 2.0T and 2.5T engines are paired with a 7-speed dual-clutch transmission.
10
2
Share

What does cgl behind Mercedes-Benz mean?

cgl behind Mercedes-Benz stands for gasoline direct injection engine. Direct injection: It involves injecting gasoline directly into the cylinder through fuel injectors installed on the cylinder head. This injection system requires relatively high injection pressure, around 3-5MPa. Therefore, the structure and arrangement of the injectors are relatively complex. Port injection: It involves installing fuel injectors on the intake pipe or intake manifold, injecting gasoline into the intake pipe or intake port at a pressure of 0.20-0.35MPa. The former is called intake pipe injection, and the latter is called intake port injection. Currently, intake port injection is widely used in gasoline engine electronic control systems.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.