What is the engine code of the Ferrari 599?

1 Answers
LukasLynn
07/30/25 3:13am
The engine code of the Ferrari 599 is F140C. The Ferrari 599 is equipped with a 6.0-liter V12 naturally aspirated engine. This engine has a maximum power output of 456 kW, a maximum torque of 608 Nm, a maximum power speed of 7600 rpm, and a maximum torque speed of 5600 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. The Ferrari 599 is a two-seater sports car with a powerful body design. The striking front air intakes are flanked by two deliberately placed exhaust outlets. The engine hood features a prominent bulge, hinting at the powerful V12 engine hidden beneath, accompanied by two heat air diffusers, adding a touch of agility to the engine hood.
Was this review help?
20
5
Share
More Forum Discussions

Where is the cabin air filter located in the Changan Mazda 3?

The cabin air filter of the Changan Mazda 3 is located behind the glove box, and replacement is relatively simple. The steps to replace the cabin air filter in the Mazda 3 are as follows: 1. Remove the glove box and take off the protective panel beneath it. 2. After removing the panel, you will see a fuse box with six screws, including two screws under the air filter cover, two nuts at the bottom of the fuse box bracket, and two fixing clips at the top of the fuse box. Remove these screws. 3. Pull the fuse box downward and remove the two screws behind it. 4. Take off the air filter cover, remove the old cabin air filter, and replace it with a new one.
17
2
Share

How to Start a Manual Transmission Car?

Here is the introduction to starting a manual transmission car: 1. Check around the vehicle, then insert the key, turn on the ignition, and start the engine. Normally, you should observe the indicator lights on the dashboard. If any warning light stays on for a long time, it indicates an abnormality in the corresponding component. You should immediately turn off the engine, inspect the vehicle, and restart the engine after resolving the issue. 2. Press the clutch. After the car is started, use your left foot to press the clutch pedal all the way down to completely disengage the clutch. 3. Shift into first gear. Move the gear lever to the first gear position, which is usually located at the front left for most models. The shifting action should be precise and quick. 4. Ensure safety. Observe the road conditions, including other vehicles and pedestrians, release the handbrake, and prepare to start. 5. Press the accelerator. Continue to hold down the clutch pedal with your left foot to keep the clutch disengaged. Use the tip of your right foot to press the accelerator pedal while slowly releasing the clutch pedal with your left foot until it is fully released. 6. Drive the vehicle. Once the car starts smoothly, you can repeat the process of pressing the clutch, shifting gears, and pressing the accelerator to complete the upshift.
1
0
Share

What is the fuel consumption of the Buick GL8?

The fuel consumption of the Buick GL8 ranges from 7.8L to 12.2L. The specific fuel consumption is not only related to the model but also depends on road conditions and driving habits. The average fuel consumption of the Buick GL8 2017 28T Comfort model is 11.09L/100KM, while the Buick GL8 2017 25S Comfort model averages 10.91L/100KM. The Buick GL8 is a commercial vehicle under SAIC-GM Buick, and its features are as follows: 1. The all-new Buick GL8 Business Traveler retains the overall design of the second-generation Buick GL8, with the front grille changing from the original waterfall style to the latest Buick family wing design, maintaining the original business appeal while adding a more dynamic touch to attract a wider range of customers. 2. In terms of space, the all-new Buick GL8 Business Traveler inherits the advantages of the second-generation Buick GL8, offering ample seating space. The passage between the second-row seats is sufficiently wide, making it convenient for the elderly and children to access the third row. 3. The Buick GL8 Business Traveler is equipped with a 2.5L naturally aspirated engine, paired with GM's latest 6AT automatic transmission.
13
2
Share

How to reset the maintenance light on the Besturn X80?

There is a button on the dashboard used for adjusting the mileage. In idle state, press and hold this button for 2-3 seconds to turn off the maintenance reminder; then turn off the engine for more than three seconds (without removing the key), press and hold the mileage reset lever, turn the key to the "on" position, and then rotate the clock adjustment lever clockwise once to reset the maintenance reminder. Below is an introduction to the Besturn X80: 1. In terms of exterior design, the Besturn X80 retains some design elements of the Besturn X concept car, featuring a distinctive overall design. The grille, fog light area, and bumper are adorned with silver accents, highlighting its youthful positioning. The eagle-eye headlights not only include LED daytime running lights but also come with xenon headlights with a cleaning function in higher trim models. 2. The interior design is one of the highlights of the Besturn X80. A silver trim runs across the entire dashboard, echoing the silver accents on the steering wheel. The functional areas of the center console are well-organized, with a harmonious overall design that offers excellent visual appeal. 3. In terms of features, the Besturn X80 also offers a multifunction steering wheel with cruise control, while navigation systems, electronic parking brakes, electrically adjustable front seats, one-button start, and electronic stability control will be available in higher trim models.
14
3
Share

What is the fuel tank capacity of the Hongqi H5 in liters?

The fuel tank capacity of the Hongqi H5 is 55 liters. Here is more information about the Hongqi H5: 1. In terms of dimensions, the new car has a length, width, and height of 4935/1840/1470 mm, respectively, with a wheelbase of 2870 mm. 2. The Hongqi H5 also showcases a more youthful interior style. The new car offers three interior color options: black, brown, and white, while the exterior paint provides even more diverse choices. The new car features either real wood or piano black interior trim, and the split-design dashboard and button operation area give it a unique look. 3. In terms of features, the new car comes standard with a power sunroof, an 8-speaker audio system, automatic dual-zone climate control, a PM2.5 filtration system, a 7-inch LCD instrument cluster, a 10-inch central control screen, 4 airbags, tire pressure monitoring, and more. Additionally, the new car will be the first to be equipped with the BOSCH 9.3 generation ESP system. 4. Regarding powertrain specifications, the new car is powered by a 1.8T turbocharged inline four-cylinder engine with an automatic start-stop function, delivering a maximum power of 137 kW and a peak torque of 250 Nm, paired with a 6-speed automatic transmission.
20
0
Share

What type of engine oil is suitable for the Nissan Kicks?

Nissan Kicks can use mineral engine oil, as well as semi-synthetic engine oil. Here is more information about automotive engine oil: 1. There are three types of engine oil used in vehicles: mineral oil, semi-synthetic oil, and fully synthetic oil, each serving different purposes. 2. Compared to semi-synthetic and mineral oils, fully synthetic oil offers superior performance. It's important to note that the type of oil used should also be determined by the engine type in the vehicle. 3. If the vehicle is equipped with a naturally aspirated engine, mineral oil or semi-synthetic oil can be used. For turbocharged engines, semi-synthetic or fully synthetic oil is recommended.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.