What is the engine code of the Baojun 730?

1 Answers
VanTucker
07/29/25 11:45pm
The engine code of the Baojun 730 is CN200. In terms of power, this vehicle is equipped with two engines: one is a 1.5-liter four-cylinder naturally aspirated engine, and the other is a 1.5-liter four-cylinder turbocharged engine. The 1.5-liter turbocharged engine delivers a maximum horsepower of 147 hp and a peak torque of 250 Nm, while the 1.5-liter naturally aspirated engine produces a maximum horsepower of 105 hp and a peak torque of 135 Nm. The Baojun 730 is an MPV model under SAIC-GM-Wuling Baojun, with dimensions of 4780mm in length, 1820mm in width, and 1755mm in height, a wheelbase of 2750mm, and a fuel tank capacity of 52 liters.
Was this review help?
18
4
Share
More Forum Discussions

How to Remove the Steering Wheel of the Eado?

To remove the steering wheel of the Eado, follow these steps: 1. Disconnect the battery, turn the steering wheel about 90 degrees, and use a small flat-head screwdriver to insert from front to back into the hole behind the steering wheel. Insert the head of the screwdriver between the retaining spring and the airbag hook, and gently lift the spring away from the hook. The airbag side will automatically pop out toward the seat. 2. Then, turn the steering wheel 180° and continue to release the retaining spring on the opposite side (if it's difficult, gently press the already lifted side of the airbag, but do not apply too much force to re-engage the clip into the spring). 3. Remove the airbag, release the yellow safety latch behind the airbag, and then unplug the airbag connector to remove the airbag. 4. Unplug the airbag coupling coil socket inside the upper part of the steering wheel, and use an M12 spline to loosen the central fixing bolt of the steering wheel counterclockwise. 5. Finally, carefully remove the steering wheel (be careful to prevent the coupling coil below from rotating accidentally).
4
0
Share

How to Display Tire Pressure Monitoring on the Avalon?

The Avalon can directly display the tire pressure of all four tires on the instrument panel. You can switch to the tire pressure display using the toggle button. Below is some related information: 1. The tire pressure monitoring system is an important configuration in a car. If there is an abnormality in tire pressure, it can be detected through this system. 2. Tires are the only components of a car that come into contact with the ground, and they are crucial for the vehicle's driving stability and safety. 3. Tire pressure should neither be too high nor too low. If the pressure is too high, it reduces the contact area between the tire and the ground, leading to decreased grip and affecting driving stability and handling. If the pressure is too low, the tire may experience wave-like deformation during high-speed driving, increasing the risk of a blowout and shortening the tire's lifespan.
6
4
Share

What to Do When Car Air Conditioning Has Poor Cooling?

Poor cooling performance of a car's air conditioning can be addressed by methods such as adding Freon, replacing the air conditioning filter, checking the coolant, and cleaning the condenser. If there is a lack of Freon, you can visit a repair shop or maintenance shop to have it refilled. Insufficient antifreeze can be handled by professionals at a repair shop or 4S store. Below are some solutions for poor air conditioning cooling: 1. Insufficient or low refrigerant levels in the air conditioning system can lead to reduced pressure and diminished heat absorption, resulting in poor cooling. In this case, the refrigerant needs to be refilled. 2. A dirty condenser may also cause poor cooling. You can rinse the condenser directly with a water hose or opt for a more thorough cleaning by removing the condenser to ensure cleanliness. 3. Check the air conditioning filter. If the car hasn't been serviced for a long time, a dirty filter may affect the cooling performance, requiring cleaning or replacement of the air conditioning filter.
18
2
Share

What Causes Brake Fluid Deficiency?

The causes of brake fluid deficiency include leakage from the brake fluid reservoir, damage to the brake lines leading to brake fluid loss, leakage from the brake master cylinder, and leakage from the brake slave cylinder. A lack of brake fluid can introduce air into the braking system during operation, resulting in brake failure and compromising vehicle safety. Below are the steps for bleeding air from the car's brake system: 1. First, locate the bleeder screw on the brake slave cylinder, remove the dust cap from the bleeder valve, and then connect a rubber tube from the bleeder port to a drain bottle. 2. This step requires two people to cooperate. One person should press the brake pedal 4-5 times inside the car and then firmly hold the pedal down. Meanwhile, the other person loosens the bleeder screw on the brake slave cylinder, allowing air to escape along with the brake fluid. 3. Repeat the above steps until only brake fluid is discharged, indicating that all air has been purged from the brake lines. 4. Finally, tighten the bleeder screw to complete the brake bleeding process.
7
2
Share

How to Downshift a Manual Transmission in General?

Manual transmission downshifting involves knowing the positions of each gear, pressing the clutch pedal all the way down, and shifting the gear lever to the desired gear. The correct method for shifting a manual transmission is as follows: 1. Before shifting, observe the car's RPM. Shift when the RPM is between 2000 and 2500 to avoid sluggish acceleration, jerking, or unresponsive throttle after shifting. 2. Press the clutch pedal all the way down while releasing the throttle, then move the shift lever to the corresponding gear. 3. After completing the shift, lift the clutch to the semi-engaged state. Once the car's power output and transmission are smoothly connected, gently press the throttle to accelerate, then slowly release the clutch.
10
5
Share

What is Maxxis tire?

Maxxis is the brand name of Maxxis tires. Maxxis is one of the brands under Cheng Shin Rubber Industry Co., Ltd. of Taiwan, China. Maxxis International continues to provide high-quality tire products for passenger cars, light trucks, bicycles, motorcycles, ATVs, trailers, kart racing, and lawn mowers. The functions of car tires are as follows: 1. Work together with the car suspension to mitigate the impact received during driving. 2. Ensure good ride comfort and driving smoothness. 3. Ensure good adhesion between the wheels and the road surface. 4. Improve the car's traction, braking, and off-road capability. 5. Bear the weight of the car, and the important role of tires in cars is receiving increasing attention.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.