What is the emission standard of the Vios?

What does 8j mean for wheel rims?

Wheel rim 8j refers to the tire width being 8 inches, which should use a minimum tire width of 225 millimeters, is suitable for 235-millimeter wide tires, and can accommodate a maximum tire width of 245 millimeters. In terms of manufacturing costs, wider tires with increased dimensions are more cost-effective, so generally, wider rims and tires require larger sizes. The relevant introduction to wheel rims is as follows: Introduction 1: The wheel rim is a cylindrical metal component that supports the tire from the inside and is mounted on the axle at the center. It is also called a wheel ring, steel ring, hub, or wheel disc. There are various types based on diameter, width, forming method, and material. Introduction 2: Depending on the characteristics and requirements of different vehicle models, the surface treatment process for wheel rims also varies, mainly divided into painting and electroplating. For ordinary vehicle models, the appearance of the wheel rim is less considered, with good heat dissipation being a basic requirement. The process generally involves painting treatment, which includes spraying followed by electric baking. This method is cost-effective, provides bright colors, and ensures long-lasting durability, with the rim's color remaining unchanged even when the vehicle is scrapped.

20

4

Share

Does Wheel Rim Scratch Affect Safety?

Whether the scratch is on the surface or the edge of the wheel rim, if it's just a surface scratch, it only affects the appearance. If the edge is scratched but not severely, there's no major concern. However, if the edge scratch is severe, it is recommended to repair it promptly, as a deep edge scratch can cause the wheel rim and tire to not fit tightly together, leading to slow tire air leakage. Below is some relevant information about wheel rims: Introduction 1: The wheel rim is a cylindrical metal component that supports the tire from the inside and is mounted on the axle. It is also known as the wheel ring, steel ring, hub, or wheel disc. There are many types based on diameter, width, manufacturing method, and material. Introduction 2: Depending on the characteristics and requirements of different vehicle models, the surface treatment process of wheel rims can vary, mainly divided into painting and plating. For ordinary vehicles, wheel rims are less considered for aesthetics, with good heat dissipation being a basic requirement. The process typically involves painting, which includes spraying followed by baking, making it cost-effective with vibrant colors and long-lasting durability. Even when the vehicle is scrapped, the color of the wheel rim remains unchanged.

16

0

Share

How to Remove the 120 km/h Speed Limit on Haval M6?

Method to deactivate the 120 km/h speed limit on Haval M6: To cancel the speed limit after activation, press the speed limit button again, which is located on the right side of the steering wheel. Use the up and down buttons to locate the speed limit alarm settings, enter the menu, and select cancel to turn it off. Below is some relevant information about the Haval H6: 1. Introduction: The Haval M6 is a compact SUV under the Haval brand, positioned as a value-for-money family car. On July 10, 2019, Great Wall Motors officially announced the launch of the 2019 Haval M6, which is equipped with a 1.5T turbocharged engine that meets the China VI emission standards, featuring high configuration, spacious interior, and strong safety. In December 2020, it was included in the "2020 China Market Top 100 Fuel Vehicles" list. 2. Interior: The interior continues the classic design style of the Haval family. The wing-shaped center console, designed with the concept of "simplicity and practicality," perfectly matches the classic three-spoke multifunction steering wheel. The intelligent combination instrument panel is paired with an 8-inch LCD central control display screen, making all functions easily accessible and reflecting humanized care.

3

5

Share

How to Reset the Tire Pressure Fault on a 2017 Magotan?

To address the tire pressure fault on a 2017 Magotan, the tire pressure issue should be resolved first. There are two methods to reset the Magotan's tire pressure warning: 1. Operate the buttons on the multifunction steering wheel and select the "Tire Pressure" option in the multifunction menu to store the current tire pressure status. 2. There is a tire pressure reset switch located beside the gear lever. With the ignition switch turned on, press and hold this button until you hear a beep, indicating the reset is complete. There are several scenarios for tire pressure faults: Rapid air leakage, high pressure, low pressure, or high temperature. The indicator light serves as a warning to the driver based on tire pressure and related issues. For instance, driving over uneven terrain may cause uneven tire pressure changes, triggering the light. If the tire pressure light is off, it's advisable to check the tire pressure monitor's functionality before driving. If the monitor fails to alert during a tire pressure issue, it may be malfunctioning. If the ON/START ignition switch causes both the indicator and TPMS lights to illuminate for 2 seconds before turning off, it could indicate that the vehicle's original receiver hasn't been properly learned and bound, or the receiver controller was replaced without proper learning and binding.

12

5

Share

What is the real reputation of Volkswagen's dry dual-clutch transmission?

Volkswagen's 7-speed dry dual-clutch transmission has a polarized reputation in the market. Explanation of Volkswagen's 7-speed dry dual-clutch transmission: As the name suggests, Volkswagen's 7-speed dry dual-clutch transmission has some internal structures without lubrication oil, aiming to save the cost of a few liters of transmission oil. The transmission features two separate oil chambers in its oil circuit design, using less than half the oil volume of an automatic transmission. This special construction allows it to withstand higher torque output while maintaining low maintenance costs. However, the disadvantages of Volkswagen's 7-speed dry dual-clutch transmission are also evident. In traffic congestion, due to insufficient lubrication oil, the heat generated by the transmission cannot dissipate in time, leading to sluggish gear shifting and strong jerking sensations. Therefore, it is crucial to be cautious when choosing Volkswagen's 7-speed dry dual-clutch transmission. Considerations when choosing Volkswagen's dual-clutch transmission: Overall, dual-clutch transmissions offer smooth and fast gear shifting with good fuel economy. It should be noted that the failure rate of dry dual-clutch transmissions is higher than that of wet dual-clutch transmissions. In the past, Volkswagen had a very high market share in the United States, but due to the oil crisis leading to rising fuel prices, Japanese cars with CVT transmissions, which excel in smoothness and fuel economy, gained favor among American consumers.

18

2

Share

What are the reasons for a manual transmission new Jetta not starting?

Manual transmission new Jetta not starting reasons are as follows: 1. Battery depletion: Battery depletion is one of the most common reasons for a car not starting. A depleted battery usually manifests as the starter not working or rotating insufficiently when attempting to start. In such cases, call the service station for rescue, or find another car to jump-start, or temporarily start the car, after which the battery must be recharged at the service station. 2. Fuel flow obstruction: Generally manifests as no oil pressure in the engine fuel supply pipe. This situation often occurs on particularly cold mornings, caused by long-term dirt in the fuel line. At extremely low temperatures, water and debris mix to block the fuel line, resulting in failure to start. In this case, place the car in a warm environment, and it will start after a while, or use the method of cleaning the fuel line for a complete solution. 3. Poor ignition system performance: On particularly cold days, due to low intake temperature, fuel atomization in the cylinder is poor. If combined with insufficient ignition energy, the result is cylinder flooding, where excessive fuel accumulates in the cylinder, exceeding the ignition limit concentration and preventing the car from starting. In this case, unscrew the spark plug to wipe off the oil between the electrodes, and the car will start after reinstallation. A thorough solution is to check the ignition system and eliminate the causes of low ignition energy, such as spark plug electrode gap, ignition coil energy, high-voltage line condition, etc.

1

2

Share

What is the emission standard of the Vios?

What does 8j mean for wheel rims?

Does Wheel Rim Scratch Affect Safety?

How to Remove the 120 km/h Speed Limit on Haval M6?

How to Reset the Tire Pressure Fault on a 2017 Magotan?

What is the real reputation of Volkswagen's dry dual-clutch transmission?

What are the reasons for a manual transmission new Jetta not starting?

Has the Model 3 Cancelled the Option for Regenerative Braking?

What are the differences of the CR-V Black Edition?

What Does an Intelligent Vehicle Terminal Mean?

What does the yellow filled marking on the road mean?