What is the emission standard of the Classic Focus?

Can unlicensed vehicles drive on highways?

Vehicles without license plates cannot drive on highways. According to Article 8 of the Road Traffic Safety Law, the state implements a registration system for motor vehicles. Motor vehicles can only be driven on roads after being registered with the traffic management department of the public security authority. For motor vehicles that have not yet been registered and need to be driven on roads temporarily, temporary license plates must be obtained. Below is additional information: 1. Temporary license plates: Paper motor vehicle license plates that allow temporary road use are called temporary driving license plates. These are temporary vehicle driving certificates issued by the vehicle management department of the public security authority for newly purchased vehicles before official registration. The validity period of temporary license plates generally does not exceed thirty days. 2. Documents required for temporary license plate application: Identity proofs of the vehicle owner and agent, proof of vehicle origin, the whole vehicle factory qualification certificate for domestically produced motor vehicles, import certificates for imported motor vehicles, and imprints of the vehicle identification number (frame number) and engine number.

10

3

Share

How many liters of engine oil are needed for the maintenance of Audi Q3 1.4T?

Audi Q3 1.4T requires 5 liters of engine oil during maintenance. Engine oil, also known as engine lubricant, is regarded as the "blood" of a car. It serves functions such as lubrication, cleaning, cooling, sealing, wear reduction, rust prevention, and corrosion protection for the engine. Only qualified lubricants can reduce wear on engine components and extend their service life. Here is an introduction to car maintenance: 1. Definition of car maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of a car, also known as car servicing. 2. Scope of car maintenance: Modern car maintenance mainly includes the engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. Purpose of car maintenance: The purpose of car maintenance is to keep the car clean, maintain normal technical conditions, eliminate potential hazards to prevent failures, slow down the deterioration process, and extend the service life.

16

5

Share

What is the torque specification for the crankshaft bearing cap bolts on the Grand Cherokee V8?

The torque specifications for the crankshaft bearing cap bolts on the Grand Cherokee V8 are 8 Nm for the main bearing caps and 6 Nm for the connecting rod bearing caps. Below are the functions of the bearing caps and precautions for replacing their bolts: Functions of engine bearing caps: Bearing caps (also known as bearing shells) play a role in cooling the bearings and ensuring liquid lubrication in the engine. When the sliding bearings are in operation, a thin oil film is required between the bearing shells and the rotating shaft for lubrication. Excessive clearance in the connecting rod bearings can lead to low oil pressure, and in severe cases, knocking sounds. If too loose, it may cause the connecting rod to move outward, damaging the connecting rod and resulting in piston wear. If the clearance is too small, it can accelerate wear on the bearings and, in severe cases, cause the crankshaft to seize. Precautions for replacing bearing cap bolts: When replacing bearing cap bolts, always use a torque wrench and tighten the bolts strictly according to the specified torque.

20

0

Share

What is the weight of the Envision?

The weight of the Buick Envision varies depending on the configuration. It can be categorized as follows: 20T two-wheel drive technology, leading, and elite versions at 1575KG; 20T two-wheel drive luxury version at 1610KG; 20T four-wheel drive luxury version at 1685KG; 28T four-wheel drive leading and elite versions at 1755KG; 28T four-wheel drive luxury, flagship, and sport flagship versions at 1800KG. Here is some information about the Buick Envision: 1. Introduction: The Chinese name for the Buick ENVISION is "Angkewei" (Envision). As a new-generation strategic model of General Motors, the Buick Envision's exterior design inherits the essence of the ENVISION Vision concept car. 2. Models: The current models are available with 1.5T and 2.0T engine options, each with both two-wheel drive and four-wheel drive variants. The 1.5T is paired with a 7-speed dual-clutch transmission, while the 2.0T is paired with a 6-speed automatic transmission.

12

5

Share

Why does the new Bora only have one reversing light on?

The new Bora is designed this way, with the symmetrical opposite side being a high-intensity fog light. There is a white lens on the right rear, which is the reversing light. The same position on the left side is not white but red, serving as the rear fog light. Below is some relevant information about the new Bora: 1. Body dimensions: The Volkswagen Bora's body dimensions are 4663mm in length, 1815mm in width, and 1462mm in height, with a wheelbase of 2688mm. 2. Engine: The Bora is equipped with a 1.2T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 85 kW and a maximum torque of 200 Nm. It features a MacPherson strut front suspension and a torsion beam rear suspension. 3. Exterior design: The Bora's front face design incorporates Volkswagen's design language, integrating continuous lines into the front face. Precise and bold lines connect the headlights with the chrome-plated grille. The contour lines of the headlights and their internal design elements are meticulously matched, complementing the chrome grille to form Volkswagen's iconic front face.

17

1

Share

What Type of Engine Oil is Best for Winter?

Due to low temperatures in winter, when selecting engine oil, it's advisable to choose 10W-40, 5W-40, or 0W-40 based on the environmental temperature conditions. Precautions for Using Engine Oil in Winter: 1. Avoid Changing Engine Oil When the Car is Cold: During winter, try to avoid changing the engine oil when the car is cold. In cold conditions, the oil is significantly affected by temperature, leading to reduced fluidity. This may result in incomplete drainage of the old oil during the change. 2. Regularly Clean the Oil Pan: The oil pan of a car engine is a crucial area that should not be overlooked while driving. During engine operation, metal particles from internal wear can flow with the oil into the oil pan, potentially clogging the filter and oil holes, which may lead to increased fuel consumption. 3. Add Engine Oil in the Right Amount: When adding engine oil, ensure the quantity is appropriate—do not overfill. The purpose of adding oil is to enhance engine lubrication. Excessive oil can increase friction among engine components, affecting normal operational efficiency. In severe cases, it may cause oil burning, blue smoke from the exhaust, and increased internal carbon deposits. Always follow the markings on the engine oil dipstick when adding oil.

6

3

Share

What is the emission standard of the Classic Focus?

Can unlicensed vehicles drive on highways?

How many liters of engine oil are needed for the maintenance of Audi Q3 1.4T?

What is the torque specification for the crankshaft bearing cap bolts on the Grand Cherokee V8?

What is the weight of the Envision?

Why does the new Bora only have one reversing light on?

What Type of Engine Oil is Best for Winter?

What to Do If the Seat Belt Chokes Your Neck?

Where is the wiper relay located in the Elysee?

What is the fuel consumption of a 4x8 truck?

What are the reasons why the door of the Great Wall Haval H6 cannot be opened?