What is the emission standard of the Changan CX20?

1 Answers
KimberlyRose
07/29/25 10:03pm
The Changan CX20 is a China National V (CN5) emission standard vehicle, a compact car under the Changan Automobile brand. The dimensions of the car are 3970mm in length, 1730mm in width, and 1615mm in height, with a wheelbase of 2450mm. It features a MacPherson strut independent front suspension and a trailing arm rear suspension, with a front-engine, front-wheel-drive layout. The Changan CX20 is equipped with two engines: a 1.3-liter naturally aspirated engine and a 1.4-liter naturally aspirated engine. The 1.3-liter engine delivers a maximum power of 63kW and a maximum torque of 110Nm, while the 1.4-liter engine produces a maximum power of 74kW and a maximum torque of 131Nm.
Was this review help?
20
1
Share
More Forum Discussions

What does 'Do not tow a full-time four-wheel drive vehicle' mean?

Full-time four-wheel drive vehicles should not be towed because they are equipped with a full-time four-wheel drive system where all four wheels are interconnected. Towing with only the front or rear wheels lifted can damage the transmission. When towing, all four wheels should be lifted. For front-wheel drive vehicles, the front wheels should be lifted during towing, while for rear-wheel drive vehicles, the rear wheels should be lifted. Full-time four-wheel drive means that the vehicle's driving mechanism independently powers all four wheels at all times. The full-time four-wheel drive system distributes power to all four tires through a flexibly connected central differential and independent front and rear axle differentials. Unlike purely mechanical differential locks, the differential in a full-time four-wheel drive system can be either a viscous coupling or a multi-plate clutch type, but both allow for speed differences between the front and rear wheels, as well as between the left and right wheels.
3
0
Share

What is the bulb model for the ninth-generation Civic?

Honda ninth-generation Civic bulb models: low beam is D4S/H11, high beam is 9005(HB3), fog light is H11, reverse light is P21W, and brake light is P21/5W. The bulbs contain a mixture of inert gases including xenon, using high-pressure xenon gas enclosed in a quartz tube to provide higher color temperature and more focused illumination. Here is some relevant information: 1. Before replacing the headlight bulb, to avoid burns from components in the engine compartment, ensure the vehicle is turned off and the engine is cool before opening the hood. Wear gloves during replacement to protect your hands and facilitate the operation. Additionally, when selecting a new bulb, choose the appropriate product based on your original bulb model. 2. When installing the bulb, avoid direct contact between your fingers and the glass body of the bulb. This is because the bulb contains gas, and even a tiny amount of oil from your fingers on the glass can shorten the bulb's lifespan, and prolonged use may pose a risk of rupture.
5
2
Share

How to use the snow mode of Dongfeng Fengguang S560?

Dongfeng Fengguang S560 snow mode usage method: Press the snowflake button on the upper right of the gear shift to activate the snow mode. After entering snow mode, the vehicle speed should be reduced to ensure driving safety even in severe snowy weather and muddy roads. The following introduces the functions of the car's snow mode: 1. The car can start smoothly on icy and snowy ground. 2. Prevent tire slippage: When driving on icy and snowy ground, tires are prone to slippage. The car's snow mode can stabilize the throttle and adjust it properly. 3. Prevent sudden throttle pressing: When the throttle is pressed hard on icy and snowy ground, the wheels may slip, reducing acceleration effectiveness and compromising safe driving. 4. Prevent understeer: If the vehicle enters a curve at too high a speed, it is prone to understeer, causing the front of the car to slide outward and making the vehicle difficult to control during turns.
14
0
Share

What transmission does the Volvo S90 use?

Volvo S90 comes standard with an 8-speed automatic transmission, which can quickly respond to changes in engine speed, ensuring smooth gear shifts. The multiple switchable gear ratios mean the engine's torque and power range can be effectively utilized. Two of these gears are overdrive gears, which help save fuel when driving at a constant engine speed. Manual gear selection is also available, and the current gear is displayed on the driver's screen. Additional information: 1. The transmission is one of the main components of a car's drivetrain. The actual usage conditions of a car are very complex, such as starting, idling, low or high-speed driving, acceleration, deceleration, climbing, and reversing. This requires the car's driving force and speed to vary over a considerable range, while the output torque and speed range of the widely used piston engines are relatively small. 2. To adapt to frequently changing driving conditions and allow the engine to operate under favorable conditions (higher power, lower fuel consumption), a transmission is installed in the drivetrain. Each gear has a different gear ratio, equivalent to the meshing of a small gear with a large gear to produce different speeds. Lower gear ratios (3rd gear and below) are used for low-speed driving, where the output shaft speed is lower than the engine speed, providing greater driving force. Higher gear ratios (4th gear and above) are used for high-speed driving, where the output shaft speed exceeds the engine speed, reducing traction to achieve higher speeds. Shifting gears means selecting different-sized gears to mesh with the output shaft gear.
20
3
Share

What is the wiper size for Trumpchi GM6?

The wiper size for Trumpchi GM6 is 22+17 inches. Below is more information about the wipers: 1. To remove the wipers, first reset them, turn off the engine, then lift the wiper by hand and push it in the opposite direction to detach it. 2. If the wipers are blocked by the hood after resetting and cannot be removed: first power on the car, activate the wipers, and when they reach the middle of the windshield, power off. Then, exit the car and remove the wipers by detaching the entire wiper blade. Use one hand to pry open the rubber blade sideways while pressing down firmly on the main bracket with the other hand to separate the wiper blade from the arm. After this, the entire wiper blade can be removed.
17
4
Share

How to Activate the Auto-Lock Feature on the 10th Generation Accord?

The method to activate the auto-lock feature on the 10th Generation Accord is: With the car door open, press and hold the lock button on the remote key for 10 seconds until the turn signal lights on the dashboard illuminate. Below is more information about the 10th Generation Accord: 1. The 10th Generation Accord is a model under Honda, with dimensions of 4893mm in length, 1862mm in width, and 1449mm in height, and a wheelbase of 2830mm. 2. In terms of power, the 10th Generation Accord uses three types of engines: a 2.0-liter naturally aspirated engine, a low-power version 1.5-liter turbocharged engine, and a high-power version 1.5-liter turbocharged engine. Additional Information: The auto-lock feature, also known as speed-sensing auto-lock, is an electronic device that automatically presses the lock button on the door when the vehicle reaches a preset speed, preventing accidental opening of the door.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.