What is the emission standard of the 9.5th generation Accord?

1 Answers
Lola
07/30/25 3:40am
The 9.5th generation Accord complies with the China 5 emission standard. Here is some relevant information: 1. Compared to the China 4 standard, the China 5 standard is expected to reduce annual nitrogen oxide emissions by approximately 1,000 tons for newly added vehicles. 2. As of July 28, 2019, many regions across the country have already implemented the China 6 emission standard ahead of schedule. The reason why the national emission standards are frequently updated is that with the increase in car ownership, the environmental pollution caused by vehicle exhaust has become increasingly severe. According to national requirements, the China 6 standard is implemented in two phases: (1) Starting from July 1, 2020, all light-duty vehicles sold and registered must meet the "China 6a" limit requirements; (2) Starting from July 1, 2023, all light-duty vehicles sold and registered must meet the "China 6b" limit requirements.
Was this review help?
11
0
Share
More Forum Discussions

Is the Roewe RX5 transmission dry or wet?

Roewe RX5 1.5T models with automatic transmission are equipped with a 7-speed dry dual-clutch transmission; the 2.0T models are paired with a 6-speed wet dual-clutch transmission. The differences between wet and dry transmissions are as follows: 1. A dry clutch transmits power through direct contact of metal plates, providing more direct power transmission. When the metal plates are pressed together, the transmission ratio increases, resulting in more immediate and noticeable effects. In contrast, a wet clutch uses oil as an intermediary, requiring the driving plate to accelerate, increasing the centrifugal force of the oil, and then accelerating the driven plate. This additional step means the response speed is slightly slower. 2. Structurally, wet clutches are more complex, which leads to higher energy loss. As a result, wet dual-clutch transmissions have lower transmission efficiency, consuming more engine power. All else being equal, wet transmissions tend to have higher fuel consumption than dry ones. 3. The metal friction plates in dry clutches cannot withstand high torque. Excessive stress can easily damage the friction plates, limiting dry clutches to small-displacement, low-torque vehicles. Wet clutches, however, have no such limitations. They can handle everything from 1.5L displacement, 200N˙m family cars to 6.0L displacement, over 1000N˙m supercars.
8
1
Share

How to Disassemble the New Lavida Car Key?

New Lavida car key disassembly method: 1. Open the mechanical key and stand the key vertically; 2. Insert a screwdriver into the gap where the key retracts; 3. Pry open the key casing. Taking the 2021 Lavida as an example, its body dimensions are: length 4670mm, width 1806mm, height 1474mm, wheelbase 2688mm, fuel tank capacity 51L, body structure 4-door 5-seater sedan. The 2021 Lavida is equipped with a 1.4T turbocharged engine, with a maximum power of 110kW and maximum torque of 250Nm, matched with a 7-speed dual-clutch transmission.
19
1
Share

How to Identify Genuine Factory Headlights?

Identifying whether headlights are genuine factory parts involves the following methods: 1. Genuine factory markings are deeply and uniformly engraved; 2. Non-genuine parts often exhibit rough craftsmanship, with more burrs on edges and inferior fit compared to genuine parts; 3. Counterfeit headlights, due to poor reflectors, produce scattered and irregular light patterns. Car headlights, also known as automotive front lights or LED daytime running lights, require maintenance through: 1. Regular checks for seal integrity—replace damaged sealing rings between the lens and reflector promptly; 2. Periodic cleaning of the reflector—replace if darkened or light output diminishes; 3. Routine removal of dust and stains from bulbs.
9
3
Share

Does the Changan Uni-T come with a manual transmission?

Changan Uni-T does not come with a manual transmission. It is equipped with a 7-speed dual-clutch transmission. The transmission is a mechanism used to change the speed and torque from the engine, capable of fixed or stepped changes in the transmission ratio between the output and input shafts. Taking the 2021 Changan Uni-T as an example, its body dimensions are: length 4515mm, width 1870mm, height 1565mm, with a wheelbase of 2710mm. The 2021 Changan Uni-T is powered by a 1.5T turbocharged engine, delivering a maximum power of 132kW and a maximum torque of 300Nm. It features a McPherson-type independent front suspension and a multi-link independent rear suspension.
8
3
Share

What transmission does the Zhonghua H3 use?

Zhonghua H3 uses Aisin transmissions. Founded in 1969, Aisin is a world-renowned professional developer and manufacturer of automotive automatic transmissions, holding the world's top market share in this field. The Zhonghua H3 is equipped with either a 5-speed automatic manual transmission (AMT) or a manual transmission. The AMT is essentially a traditional AT or CVT transmission with added manual shifting capability, designed to enhance the driving pleasure of automatic transmission vehicles. When using the Zhonghua H3's transmission, pay attention to the following points: Do not delay transmission fluid changes for extended periods. Prolonged use of old fluid can damage internal components like bearings and housings; Avoid prolonged coasting in neutral. While some experienced drivers coast in neutral with manual transmissions, doing so with automatic transmissions can cause overheating and rough engagement when shifting back to D; Never shift into D/R before coming to a complete stop. Some drivers shift prematurely to demonstrate smooth operation, but this causes significant gear wear and may lead to gear grinding over time; Avoid frequent steep hill climbs in D. Automatic transmissions may overheat under heavy load or upshift prematurely on steep inclines. Use manual mode to maintain lower gears or sport mode to protect the transmission; Do not tow long distances. If the vehicle breaks down, use a flatbed tow truck with the transmission in N rather than towing with a rope, which could damage the transmission.
1
4
Share

How to Lock the Doors While Driving the Tayron?

Shift into P gear, then power on the vehicle. Close all four doors and press and hold the lock button. The security indicator flashing twice indicates the setup is complete. Below are detailed introductions about the Tayron: 1. Introduction: The Tayron is a mid-size SUV under the Volkswagen brand. It is equipped with three types of engines: a 1.4L turbocharged engine, a low-power 2.0L turbocharged engine, and a high-power 2.0L turbocharged engine. 2. Engine Configurations: The 1.4L turbocharged engine in the Tayron delivers 150 horsepower and a maximum torque of 250 Nm. This engine reaches its peak torque at 1750-3000 rpm and its maximum power at 5000-6000 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. The low-power 2.0L turbocharged engine produces 186 horsepower and a maximum torque of 320 Nm. Its peak torque range is 1500-4000 rpm, with maximum power achieved at 4100-6000 rpm. This engine utilizes a combined injection system and is built with an aluminum alloy cylinder head and a cast iron cylinder block. The high-power 2.0L turbocharged engine generates 220 horsepower and a maximum torque of 350 Nm. It achieves peak torque at 1500-4500 rpm and maximum power at 4500-6200 rpm. This engine also employs direct fuel injection technology and is constructed with an aluminum alloy cylinder head and a cast iron cylinder block.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.