What is the emission standard of the 2019 Classic Sylphy?

1 Answers
Darlene
07/30/25 3:17am
2019 Classic Sylphy meets the China VI emission standard. Below is more information about vehicle emission standards:1. The country has introduced strict emission standards to restrict car manufacturers, enabling them to produce more environmentally friendly vehicles, which is beneficial for protecting the Earth's environment.2. The China VI standard is an upgrade of the China V standard, formulated based on international standards. It is currently one of the strictest emission standards globally, reaching the current EU fuel quality standards for vehicles, with some indicators even surpassing EU standards. Compared to the China V standard, the China VI fuel standard reduces carbon monoxide emissions by 50%, and the emission limits for total hydrocarbons and non-methane hydrocarbons are lowered by 50%.
Was this review help?
9
5
Share
More Forum Discussions

What are the regulations for licensing a motorhome?

The regulations for licensing a motorhome: Currently, self-propelled motorhomes are mainly domestically produced. For a domestically produced motorhome to be licensed, it must have a motorhome product model listed in the MIIT's automotive announcement catalog, and it must also meet environmental protection standards. When the vehicle leaves the factory, the manufacturer will provide the owner with the chassis certificate, vehicle certificate, conformity certificate, and vehicle invoice. The owner must then take these documents to the local tax office to pay the purchase tax and insurance, and then go to the vehicle management office for inspection and licensing. Trailer-type motorhomes also require a certificate for licensing, and domestically produced travel trailers must have an automotive announcement model. A motorhome is defined as a vehicle with a total length not exceeding 8 meters, a width not exceeding 2.5 meters, a height not exceeding 4 meters, and a weight not exceeding 2.5 tons.
13
5
Share

How to reset the oil level warning light on a 2016 Superb?

The method to reset the oil level warning light on a 2016 Superb: First, check if the oil level is sufficient. If the oil level is adequate, the issue might be with the sensor, and you will need to visit a repair shop to fix it. The warning light will automatically reset after the repair, as it cannot be manually reset. Only proper oil pressure ensures that oil is delivered to all friction surfaces of the engine. Both excessively high and low oil pressure can affect the engine's normal operation and may even cause damage to engine components. The 2016 Superb has body dimensions of 4861mm in length, 1865mm in width, and 1489mm in height, with a wheelbase of 2841mm. The 2016 Superb features front-wheel drive, a front suspension type of MacPherson independent suspension, and a rear suspension type of four-link independent suspension.
20
4
Share

What are the components of an automotive air conditioning control system?

The components of an automotive air conditioning control system include the compressor, electronically controlled clutch, condenser, evaporator, expansion valve, receiver-drier, pipelines, condenser fan, vacuum solenoid valve, idle speed controller, and control system. The automotive air conditioning system is divided into high-pressure and low-pressure pipelines. The high-pressure side includes the compressor output side, high-pressure pipelines, condenser, receiver-drier, and liquid pipelines; the low-pressure side includes the evaporator, accumulator, return pipelines, and compressor input side. The function of the compressor is to increase the pressure of the refrigerant, promoting its liquefaction and heat release in the condenser, and serving as a power source to circulate the refrigerant within the system. The function of the condenser is to cool the high-temperature, high-pressure gaseous refrigerant into a high-temperature, high-pressure liquid refrigerant.
7
0
Share

What documents are needed for the first maintenance?

The items required for the first maintenance include: driver's license; maintenance manual; vehicle registration book; warranty manual; owner's ID card; vehicle's driving license; vehicle's purchase invoice. Bring these to the designated first maintenance facility for the vehicle's initial service. Important note: Schedule an appointment with the 4S store in advance. The first maintenance refers to the initial service after a new car has been driven. The specific timing varies by vehicle, typically after driving 1,000 to 3,000 kilometers. It is essential to attend the first maintenance promptly, neither in advance nor delayed. The completion of the first maintenance signifies the end of the car's break-in period, allowing the vehicle to be driven under standard loads and normal speeds as required. The timing for the first maintenance is calculated from the date of vehicle pickup. There are two indicator values for the first maintenance: mileage and time. The condition that is met first will be the standard. First maintenance tasks include: changing the engine oil and oil filter, cleaning the air filter, checking various fluid levels for normalcy, inspecting the generator belt and wiper blades for damage, checking tire pressure for normalcy, and examining tires for damage or bulges. Time required: Completing all tasks takes approximately 2 hours. The most crucial aspect of a new car's first maintenance is changing the engine oil and oil filter. When changing the oil, the oil filter must also be replaced. The choice of oil must refer to the "Vehicle Usage and Maintenance Manual," as different vehicle models specify different oil grades. Maintenance precautions: Do not rinse the interior of the car body with water: Many people clean their cars during holidays, washing the exterior with water and wiping the interior with a cloth. It is important to note that the interior of the car body should not be directly washed with water. If the floor mats are dirty, use a vacuum cleaner or remove them to clean with a brush and detergent, dry them, and then put them back. The rubber mats under the driver's floor have many drainage holes. Water entering these areas will not dry but flow through the holes to erode components like the gearbox. A better approach is to use a vacuum cleaner for cleaning, followed by wiping with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the car's antifreeze is low, it is recommended to drain the existing antifreeze and refill with the same brand. Different brands of antifreeze have varying chemical properties, and mixing them can cause corrosion due to incompatible inhibitors. Different brands use different inhibitors, so avoid mixing them to prevent unnecessary issues. Do not lubricate tire bolts and nuts: When bolts on a moving car rust, they are often oiled to function again. Some people apply lubricant to wheel bolts and nuts to prevent rust, but this poses a safety risk. At high speeds, bolts and nuts can loosen or even fall off, leading to driving failures. Do not press the accelerator when starting an EFI (Electronic Fuel Injection) car: The starter of an EFI car differs from that of a conventional car. Its fuel injection control system can automatically adjust the fuel supply based on the starter's temperature and operating conditions, ensuring a smooth start.
8
2
Share

How to Replace the Battery in a Ford Edge Key?

Steps to replace the battery in a Ford Edge key: 1. Press the clip and open the back cover; 2. Insert a coin into the slot and twist to separate the outer cover; 3. Remove the old battery; 4. Install the corresponding new battery; 5. Reattach the outer cover and back cover. The Ford Edge is a mid-to-large-sized crossover SUV model built on Ford's global mid-size vehicle platform. The dimensions of the Ford Edge are 4878 mm in length, 1925 mm in width, and 1770 mm in height, with a wheelbase of 2850 mm. The Ford Edge luxury series features a bold exterior design, with a new hexagonal grille integrated with large full-LED headlights. The Ford Edge comes standard with a 12.8-inch vertical touchscreen, complemented by a 10.1-inch full-color digital instrument cluster, black headliner design, and premium velour carpeting.
11
1
Share

What lights should be turned on when driving in heavy rain?

When driving in heavy rain, you should turn on the vehicle's low beam headlights. Remember not to use the high beam headlights, as most modern vehicles are equipped with xenon or LED high beam lights, which can significantly impair the vision of oncoming drivers if used. In situations where heavy rain causes very low visibility, it is necessary to turn on the fog lights. Fog lights have strong penetration, allowing other road users to notice the vehicle through the light, thereby enhancing driving safety. When it first starts to rain, although the sky is relatively dark, visibility is still acceptable. In this case, you should use the parking lights. When the rain becomes heavier, you should turn on the headlights or front fog lights.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.