What is the emission standard of the 2014 Corolla?

1 Answers
McKimberly
07/29/25 10:28pm
The 2014 Corolla model meets the China National V emission standard for exhaust emissions. Below are the specific details of the 2014 Toyota Corolla: 1. The Corolla is a brand under Toyota, positioned as a compact sedan. 2. In terms of configuration, the new car comes standard with ABS+EBD, EPS electric power steering system, heated exterior rearview mirrors, front dual airbags, and front side airbags. Except for the base model, all other models come standard with a power sunroof; the 1.8L models are also equipped with VSC electronic stability control. 3. In terms of power, the Corolla offers two naturally aspirated engine options: a 1.6L and a 1.8L. The 1.6L engine delivers a maximum power of 90kW (122PS) and a maximum torque of 154Nm, while the 1.8L engine produces a maximum power of 103kW (140PS) and a maximum torque of 173Nm. The transmission system includes both manual and S-CVT continuously variable transmission options.
Was this review help?
13
2
Share
More Forum Discussions

How to Test Car Tire Pressure?

The method for testing car tire pressure is to use a tire pressure gauge or observe the dashboard to determine the tire pressure condition. The following are the effects of excessive tire pressure: 1. Impact on braking performance: The friction and adhesion of the tire will decrease, affecting braking performance. 2. Reduced comfort: It can cause steering wheel vibration and deviation, reducing driving comfort. 3. Decreased tire lifespan: It accelerates the localized wear of the tread pattern in the center of the tire, reducing its lifespan. 4. Impact on component lifespan: Increased body vibration indirectly affects the lifespan of other components.
19
3
Share

Can a sedan accommodate five people?

If the vehicle's rated passenger capacity is 5 (including the driver) or more, it can accommodate them; otherwise, it cannot. Below is relevant information about the hazards of vehicle overloading: 1. Shortens the vehicle's service life: Vehicles are manufactured based on technical specifications, and load limits are no exception. Overloading alters the original design parameters. For example: rivets may loosen, fastening screws may fall off, weld points may crack or break, and the entire frame may deform. Overloading reduces the vehicle's lifespan and accelerates the aging of rubber and plastic components. 2. Accelerates tire wear and deformation: Vehicle tires are designed and produced according to the total weight of the vehicle, with a considerable safety margin. However, when a vehicle is overloaded, the tires bear excessive weight and deform. Increased friction also shortens tire life. Tests show that with a 20% overload, tire life decreases by 30%; with a 40% overload, tire life is halved. 3. Reduces braking performance and increases the non-safety zone distance: Many factors affect a vehicle's braking distance, among which changes in vehicle load directly influence the braking distance. When a loaded vehicle brakes, the load shifts forward, increasing the load on the front wheels and decreasing it on the rear wheels.
7
4
Share

How Long Does It Usually Take to Apply Car Film?

Car film application is divided into window film and paint protection film, with different time requirements for each type. 1. Window Film: Also known as window tint, it takes a relatively short time, approximately 3 to 5 hours. 2. Paint Protection Film: Includes "clear bra" (paint protection film) and "car wrap" (color change film). This process takes more time, ranging from 1 to 2 days for shorter projects to 3 to 5 days for longer ones. Post-application precautions: 1. Do not roll windows up or down: If the weather is sunny after application, avoid rolling windows up or down for three days. In case of cloudy or rainy weather, refrain from doing so for seven days to prevent film edges from lifting and causing imperfections. 2. Avoid using defogger heating wires: Please do not activate the defogger heating wires within 30 days of film application. 3. Address bubbles promptly: If bubbles appear at the edges of the film, visit the installation site within 24 hours for repair and timely maintenance.
13
2
Share

Can I Get a Loan for Buying a Car Across Provinces?

It is possible to obtain a loan for purchasing a car across provinces. Below are some important considerations when buying a car: 1. Check the documents: The vehicle registration certificate, purchase invoice, and vehicle qualification certificate are essential documents for vehicle registration. The new car delivery confirmation form, vehicle manual, and warranty certificate are required for future maintenance and warranty claims, so make sure to carefully check and keep these documents. 2. Inspect the new car: Conduct an external inspection of the vehicle, including the body paint and engine, as well as an internal inspection, such as checking the mileage and audio system. When signing the purchase contract, carefully review the terms and conditions. After purchasing the car, you need to register it with the vehicle management department for a new license plate.
16
3
Share

How to remove the spare tire of Wuling Hongguang Plus?

Pull the trunk switch located on the left side of the driver's leg area to lift and open the trunk. Lift the floor panel to locate the spare tire, then unscrew the central removal bolt to take out the spare tire. Below are potential safety hazards associated with spare tires: 1. Unsafe for prolonged use: Spare tires and original tires have different production dates, leading to variations in aging, hardening degree, lifespan, and deformation. Therefore, prolonged use is unsafe. After emergency use, the spare tire should be promptly replaced with an original factory tire. 2. Limited to emergency use: Regardless of width, spare tires have special production and usage requirements from manufacturers. Since spare tires are not routinely mounted on vehicles and lack wear, their usage inherently carries certain safety risks. 3. Not suitable for tire rotation: Authorized dealerships impose strict requirements on original tire rotation, and spare tires are particularly unsuitable for rotation. Tire rotation aims to balance wear across different positions, but current practices discourage left-right rotation, and front-rear rotation also presents uneven wear issues.
19
0
Share

When will Nanchang implement the China 6 standard?

The China 6 standard will be implemented uniformly according to national policy. The two emission limit schemes, China 6A and China 6B, will be implemented in 2020 and 2023 respectively. Below is relevant information about China 6: 1. Introduction: China 6 generally refers to the National Sixth Stage Emission Standard for Motor Vehicles. The National Sixth Stage Emission Standard for Motor Vehicles is a standard formulated to implement the "Environmental Protection Law of the People's Republic of China" and the "Air Pollution Prevention and Control Law of the People's Republic of China", to prevent pollution of the environment by exhaust emissions from compression-ignition and gas-fueled spark-ignition engine vehicles, to protect the ecological environment, and to safeguard human health. 2. China 6 symbol: The symbol for China 6 is 'China VI', which is the strictest automobile emission standard in China. The China 6 emission standard will be fully implemented in 2023. The implementation time of the China 6 emission standard is divided into two phases, 'China 6a' and 'China 6b', corresponding to July 1, 2020, and July 1, 2023, respectively.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.