···
Log in / Register

What is the emission standard of the 2013 Buick Excelle?

3 Answers
SanAlaina
07/29/25 11:30pm
2013 Buick Excelle emission standard is China IV. Below is more information about the 2013 Buick Excelle: 1. Vehicle dimensions: The 2013 Buick Excelle is a compact car with body dimensions of 4515mm in length, 1725mm in width, and 1445mm in height, a wheelbase of 2600mm, a minimum ground clearance of 125mm, and a curb weight of 1210kg. 2. Suspension: The 2013 Buick Excelle features a MacPherson strut front suspension and a twin-link independent rear suspension. 3. Engine: It is equipped with a 1.5L naturally aspirated engine producing a maximum horsepower of 113PS, a maximum torque of 141Nm, and a maximum power of 83kW, paired with a 5-speed manual transmission.
Was this review help?
3
4
Share
AlexandraDella
08/16/25 2:18am
I remember when I first bought my Buick Excelle back in 2013, the sales consultant specifically emphasized that it met the China IV emission standards. This was because the new regulations had just come into effect, and China IV vehicles were better at controlling exhaust pollution, with lower emissions of hydrocarbons and nitrogen oxides. Over the years, my city commute fuel consumption has remained stable at just over 8 liters, and the annual exhaust emissions test has always been passed smoothly. However, it's important to pay attention to engine maintenance, regularly changing the oil and spark plugs to maintain efficiency. Nowadays, some major cities have implemented traffic restrictions for China IV vehicles, so I always check my route before heading out to avoid any trouble. For buyers considering a used Excelle, I recommend checking the environmental label or VIN code to confirm the emission level and avoid being misled, as this could cause headaches during annual inspections or when driving on the road.
Was this review help?
11
1
Share
Expand All
SanFrank
10/19/25 2:25am
As a car enthusiast, I believe the 2013 Buick Excelle meets China's National IV emission standards, which were quite common for vehicles in this class at that time. The pollutant limits were about 30% stricter than National III standards, primarily controlled through the three-way catalytic converter and oxygen sensors. When checking engine conditions, I often use simple tools to measure exhaust emissions and ensure compliance. National IV vehicles perform well, but cities like Beijing, Shanghai, and Guangzhou now restrict older emission-standard vehicles from entering urban areas. Long-term owners should stay alert to policy changes. I recommend regularly checking the environmental protection department's website for updated vehicle emission lists to mitigate risks, as proper maintenance can keep your car running cleaner and longer.
Was this review help?
11
0
Share
Expand All
More Forum Discussions

What is the function of car paint?

Car paint serves to protect the vehicle from various corrosive elements in the atmosphere, decorate the car, indicate the type of vehicle, improve comfort and sealing, and prevent noise caused by vibration. Below are the principles and composition of car paint: Principles of car paint: The main component of car paint is resin, which has relatively large molecular gaps. After coating, small molecular elements such as silicon, silicon dioxide, and nano-inorganic silicon in the coating solution can fully penetrate into the molecular gaps and micropores of the car paint, forming a transparent crystalline layer on its surface similar to a smartphone screen protector. This significantly enhances the hardness and scratch resistance of the car paint surface, providing long-term sealing protection and keeping the car paint bright and new for a long time. Composition of car paint: The car paint surface consists of four layers, from the inside out: the electrophoretic layer, the middle coat layer, the color paint layer, and the clear coat layer. After the entire body is assembled, it is immersed in an electrophoretic tank, forming an electrophoretic layer on the surface of the body.
3
5
Share

What is the normal voltage range for a 12V car battery?

Car 12V battery normal voltage range: No-load voltage is around 13V, load voltage should not be lower than 11V. Effects of abnormal battery voltage: Both excessively high or low battery voltage will cause certain impacts. Regular inspection of battery condition is recommended. When battery voltage drops below 10.8V, immediate charging is required. If battery voltage is too low, the vehicle may experience difficulty starting or complete failure to start. If battery voltage is too high, it may damage the battery. Voltage measurement methods: Use a multimeter to check the battery voltage during engine cranking. First measure with a high-frequency discharge meter or battery tester - under load current not less than 110A, the minimum voltage should not be lower than 9.6V and remain stable for 5 seconds. If voltage is below 9.6V but remains stable for 5 seconds, it indicates over-discharge and requires immediate charging. If voltage drops below 9.6V and cannot remain stable within 5 seconds, rapidly decreasing to 0V or near 0V, this indicates battery failure requiring replacement.
11
2
Share

Can a Car with Tuned ECU Pass the Annual Inspection?

If the car is only tuned to stage 1 or 2, it will not affect the annual inspection. However, if it is tuned to stage 3, it will fail the annual inspection because too many modifications are required. The so-called stage 1, stage 2, and stage 3 refer to the tuning of the ECU program. Below are the impacts of ECU tuning and the items checked during the annual inspection: ECU tuning has the following effects on the car: After ECU tuning, the car will require higher-quality gasoline. Using low-quality gasoline may damage the vehicle. The temperature requirements also increase. After ECU tuning, the engine operates at higher frequencies, and without a proper cooling system, it may affect the engine's lifespan. The 4S store may refuse warranty services for vehicles with tuned ECUs. Items checked during the annual car inspection: Exterior inspection, exhaust emission test, window film transparency check, traffic violation check, and safety inspection, which includes a comprehensive check of the horn, brakes, axle weight, chassis, ignition system, lighting system, exhaust system, license plate installation, etc.
10
4
Share

What is the fuel consumption of the CFMOTO 150nk?

CFMOTO 150nk has one model currently on sale, which is the CFMOTO 150nk (2021 model) motorcycle, equipped with a 150ml engine. The NEDC fuel consumption is 2.5L per 100 kilometers. The fuel tank capacity of different CFMOTO 150nk models varies. The distance that can be covered with a full tank of fuel is as follows: For the model equipped with a 150ml engine, the fuel tank capacity is 10L, and the distance that can be covered with a full tank is 10/2.5*100=400km. The fuel consumption of a motorcycle is directly related to five major factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. Driving at an economical speed of 50 to 60 kilometers per hour is more fuel-efficient. Avoid sudden acceleration and braking, try to maintain a steady and smooth speed, and properly match the vehicle speed with the engine RPM for better fuel efficiency. The specific factors that can increase motorcycle fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when approaching a red light, can increase fuel consumption. The vehicle itself: Vehicles with larger displacement engines generally consume more fuel than those with smaller displacement engines because larger displacement engines usually have higher power output and require more fuel to burn for work. Heavier motorcycles also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases vehicle resistance and fuel consumption. Low environmental temperatures: When the engine block temperature is low during cold starts, the injected fuel does not atomize easily, requiring more fuel to burn, which increases fuel consumption. Additionally, in low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
16
2
Share

Is Commercial Insurance Still Valid After Vehicle Transfer?

After the vehicle is transferred, the insurance can still be used. Vehicle insurance includes compulsory insurance and commercial insurance. The transfer of used car insurance needs to be done after the used car transaction is completed, and after the registration certificate owner information is changed, and the new vehicle license plate and driving license are obtained. Used car insurance does not necessarily have to be transferred; you can choose to cancel the insurance directly, but the compulsory insurance must be retained. Transfer documents: Seller: Owner's ID card, vehicle registration certificate, vehicle driving license, original purchase invoice (or transfer ticket if previously transferred). If the seller is a company, the original business license and official seal are required. Buyer: ID card. If the buyer is from another city and needs a local license, a valid temporary residence permit is also required. If the buyer is a company, the original business license and official seal are required. Original vehicle purchase invoice or the last transfer invoice. Original vehicle driving license. Vehicle registration certificate (green book). For outbound transfer, the small book of vehicle purchase tax is required. Relevant content about used car insurance transfer: Compulsory insurance change. According to the "Compulsory Insurance Regulations," in used car transactions, compulsory insurance cannot be canceled in principle. The only situation where cancellation is allowed is when the vehicle is sold to another region, in which case the new owner can purchase compulsory insurance in the new location. The new owner needs to bring their ID card, new driving license, used car transfer documents, and the newly issued compulsory insurance policy to the original owner's insurance company for cancellation. Timely change of commercial insurance. After the transfer of a used car, attention should not only be paid to the transfer of compulsory insurance but also to commercial insurance matters. For locally purchased used cars, the change requires the new owner and the original owner to bring the original policy, ID cards, new driving license, and transfer certificate to the original insurance company for processing. For used cars purchased from another region, as some insurance companies cannot underwrite policies across regions, the original owner can cancel the commercial insurance with the insurance company, and then the new owner can purchase new commercial insurance in the new location. If the insurance company offers nationwide coverage, the branch in the new location can contact the original underwriting branch to inquire about the transfer procedures. If cancellation is desired, the original owner's policy and ID card must be provided. After cancellation, the new owner can purchase new car insurance from any insurance company by providing the new driving license or vehicle transfer certificate. The documents required from the original owner for used car transfer include: registration certificate, driving license, and ID card. The buyer needs to provide an ID card, and if they are from another city, a residence permit or temporary residence permit is required. Vehicle transfer first requires a vehicle evaluation. The evaluation fee is generally 1%-2% of the evaluated vehicle price, and other fees include license plate and driving license costs. The original commercial insurance can be canceled (compulsory insurance cannot be canceled), or it can be transferred to the buyer at the insurance company. Precautions for purchasing used cars: Incomplete documents. Complete documents for a used car include: vehicle registration certificate (or original purchase invoice), driving license, vehicle purchase tax payment certificate, road maintenance fee documents, and compulsory insurance. If the vehicle registration certificate or driving license is missing, or if there are unpaid compulsory insurance or road maintenance fees, it will cause endless trouble for the buyer. Therefore, when purchasing a car, if the seller cannot provide complete documents, the buyer should be particularly cautious. Tampering with the odometer. Most consumers like to judge the condition of a car by the odometer, and sellers often take advantage of this psychology to tamper with the odometer. In fact, the odometer is not only a record of usage intensity but also an indicator of the maintenance and replacement of other vehicle components. If the buyer follows the maintenance schedule based on a tampered odometer, it will bring a series of potential safety hazards. New paint covering external damage. When purchasing a used car, if the car has been repainted and there are signs of repair around the front, rear, and A, B, C pillars, the car may have been involved in a major accident.
8
2
Share

What is the Chinese meaning of ESP?

ESP stands for Electronic Stability Program in Chinese. More information about ESP is as follows: 1. The automotive ESP system is a chassis braking technology developed on the basis of the Anti-lock Braking System (ABS). It mainly consists of a control unit, steering sensor, wheel speed sensor, sideslip sensor, lateral acceleration sensor, etc. 2. ESP achieves automatic vehicle safety control, effectively improving driving stability and safety under dynamic conditions such as braking, acceleration, and steering. It is a highly effective onboard tool.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.