What is the emission standard of the 2012 Sagitar?

1 Answers
JasperLee
07/30/25 5:07am
The 2012 Sagitar meets either the China IV or China V emission standards. The dimensions of the 2012 Sagitar are 4644mm in length, 1778mm in width, and 1482mm in height, with a wheelbase of 2651mm. The front fascia of the 2012 Sagitar continues the Volkswagen family lineage, featuring a chrome-accented grille that seamlessly connects with the headlights. The rear design of the 2012 Sagitar bears some resemblance to the new Passat, with arrow-shaped taillights replacing the rounded style of the previous model, showcasing precise and dynamic lines. The internal fuel tank release button on the door panel has been removed and replaced with an automatic press-type mechanism, greatly enhancing convenience during refueling. In terms of power, the 2012 Sagitar 1.6L model is equipped with the EA111 series engine, with a maximum output power increased to 105 horsepower and a peak torque of 155 Nm.
Was this review help?
12
2
Share
More Forum Discussions

Will Car Stickers Be Penalized?

Car body stickers will not violate traffic regulations if they do not affect the vehicle's appearance or safe driving. Below are the precautions for stickers: 1. Car stickers cannot use the special colors designated for specific vehicles: firefighting red, engineering rescue yellow, and the upper white and lower blue color combination designated for national administrative law enforcement. These are special colors for specific vehicles and cannot be used on ordinary vehicles. Therefore, for the sake of personalization or other reasons, attempting to modify the vehicle with a full-body color-changing film (or other methods) constitutes illegal vehicle modification and will result in a fine of 500–1,000 yuan, along with an order to restore the vehicle to its original condition. 2. The area of car stickers must not exceed 30% of the vehicle's body area; exceeding this requires approval: If the area of car stickers is too large (exceeding 30%) and has not been reported to the public security traffic management department, it will cause the vehicle to differ from the photo on the vehicle registration certificate. This will be deemed illegal modification and will result in a fine of 500–1,000 yuan. Additionally, in the event of a vehicle accident, insurance companies may refuse to provide related compensation services for this reason. 3. Car stickers must not affect safe driving: The content must be healthy and positive.
11
0
Share

Why Should You Avoid Flood-Damaged Cars?

Flood-damaged cars refer to vehicles that have been submerged in water. It is well-known that vehicles contain numerous mechanical components and various electronic parts. Currently, no vehicles on the market are completely sealed and waterproof. This means that when a vehicle is submerged in water, various components and electronic parts are bound to be damaged, leading to significant safety hazards. For example, the vehicle may stall at high speeds or experience brake failure. Metal Corrosion: Moisture-induced rust can occur as some metal fittings inside the vehicle are not treated with anti-corrosion measures. After repairs, residual moisture can accelerate the corrosion and oxidation of these metals. Damage to Electronic Control Components: Water damage can severely harm the vehicle's electronic control components, such as control modules and sensors for various systems, as well as electrical connectors, posing significant risks.
6
4
Share

Can You Make a U-Turn on a Dashed Yellow Line?

Dashed yellow lines can be either double dashed yellow lines or a combination of one solid and one dashed double yellow line, and the specific situation must be analyzed. Double yellow lines can be either dashed or solid: double solid yellow lines (usually placed in the center of a two-way four-lane road or wider, often without a median or with a low median), double dashed yellow lines (usually placed on roads or intersections with lower traffic volume), or a combination of one solid and one dashed double yellow line. Below are the different driving requirements for these three types of road markings: 1. Double solid yellow lines: U-turns, crossing, or speeding turns are strictly prohibited. Violations will result in a 200-yuan fine and 3 demerit points. 2. Double dashed yellow lines: On main roads, left turns are allowed but U-turns are not, provided it is safe and does not obstruct traffic. 3. Combination of one solid and one dashed double yellow line: Vehicles on the dashed side can make U-turns or cross the line for turns if it is safe and does not obstruct traffic, while vehicles on the solid side cannot cross the line and must not remain on the double yellow line for an extended period.
4
3
Share

What is the vehicle that mixes concrete called?

The vehicle that mixes concrete is called a mixer truck or can also be referred to as a concrete mixer transport truck. A mixer truck is a specialized truck used to transport construction-grade concrete; due to its shape, it is often nicknamed the "snail truck" or "olive truck." These trucks are equipped with a cylindrical mixing drum to carry the mixed concrete. During transportation, the mixing drum continuously rotates to ensure the concrete does not solidify. Below is an introduction to concrete mixer transport trucks: 1. Components: They consist of a truck chassis, mixing drum, transmission system, water supply device, full-power take-off, front and rear supports for the mixing drum, reduction gear, hydraulic transmission system, loading and unloading system, and control mechanism. The concrete mixer transport truck is composed of a truck chassis and specialized concrete mixing and transport equipment. 2. Working principle: Power is output from the full-power take-off of the second-class chassis and transmitted to the hydraulic pump via a drive shaft. The hydraulic pump generates hydraulic energy, which is transmitted to the hydraulic motor through oil pipes. The hydraulic motor converts hydraulic energy into kinetic energy, which is then transmitted to the mixing drum via a reduction gear to increase torque. By adjusting the servo handle angle of the (double-acting variable) hydraulic pump, the mixing drum's rotation direction and speed are controlled, enabling operations such as concrete loading, mixing, agitation, and unloading.
10
0
Share

Should the Clutch Be Fully Depressed When Shifting Gears?

When shifting gears, it is not always necessary to depress the clutch pedal all the way to the floor. The engagement travel of the clutch and transmission gears varies from car to car—some have longer travel, while others have shorter. As long as the clutch is depressed enough to disengage the transmission gears, you can shift gears. However, the clutch must be depressed every time you shift. Below are some key points about fully depressing the clutch when shifting: 1. Principle: Fully depressing the clutch when shifting completely disengages the engine from the transmission gears, allowing the gear lever to change the gear set before re-engaging. Since the gear sets before and after shifting are different, there is a speed difference between the gear sets to be engaged after shifting, which is synchronized by the synchronizer. 2. Consequences: If the clutch is not fully depressed during the shifting process, there will be a significant speed difference between the shifting gear set and the transmission gear set, making smooth engagement difficult. In mild cases, this can accelerate wear, and in severe cases, it can cause gear grinding, leading to transmission damage.
5
5
Share

What does SCR mean for trucks?

SCR stands for "Selective Catalytic Reduction" technology, which is a method for treating diesel engine exhaust. The technical approach involves first addressing the particulate emissions of diesel engines through in-engine purification techniques such as optimizing combustion within the cylinder and reducing oil consumption. Then, an SCR aftertreatment device is used to reduce NOx emissions from the engine. SCR System: The SCR system consists of an ammonia supply system, an ammonia/air injection system, a catalytic reaction system, and a control system. To avoid energy consumption from reheating the flue gas, the SCR reactor is typically placed after the economizer and before the air preheater, i.e., in the high-dust section. Ammonia is introduced into the horizontal pipeline before the air preheater and mixed with the flue gas. Catalytic Reaction System: The catalytic reaction system is the core of the SCR process, equipped with NH3 nozzles and a fly ash purge device. The flue gas flows through the duct into the SCR reactor loaded with the catalyst, where NH3 is catalytically reduced to N2 on the surface of the catalyst.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.