What is the emission standard of the 2009 BYD F3?

2 Answers
HarleyMarie
07/29/25 1:29am
2009 BYD F3 complies with the China III emission standard. Emission standards refer to the levels of pollutants emitted from vehicle exhaust, mainly including harmful gases such as carbon monoxide, hydrocarbons, nitrogen oxides, particulate matter, and soot. Methods to check a vehicle's emission standard: Look at the vehicle's environmental protection label, which usually has a clear mark on the back; check the website of the Motor Vehicle Exhaust Pollution Supervision and Management Center; inquire at the vehicle management office with the vehicle registration certificate; check the vehicle's factory certificate; or roughly estimate based on the year the vehicle was registered. The China III standard is the third stage of China's vehicle emission standards. The China III emission standard is equivalent to the Euro III emission standard, meaning the pollutant levels in the exhaust are similar to those of Euro III. The difference is that new vehicles must be equipped with an OBD (On-Board Diagnostics) system. The OBD system features more monitoring points and systems, with oxygen sensors installed at both the inlet and outlet of the three-way catalytic converter. It ensures compliance with emission standards through real-time monitoring, thereby better enforcing the Euro III emission standard.
Was this review help?
3
5
Share
Journey
08/12/25 5:36am
I drive a 2009 BYD F3 myself, and it has proven quite durable up to now. According to my research, this car mostly meets the China III emission standard, which is an older standard. Around 2009, domestic automakers mainly promoted China III, while China IV wasn’t implemented until 2010, so this batch of F3 models all fall under this category. It doesn’t affect driving much, but you need to pay extra attention to emission tests during annual inspections. I regularly clean the engine and replace filters to keep the exhaust system running smoothly. It can be annoying in cities with restricted zones—China III vehicles face higher restrictions in some major cities. If you want to keep driving it for a few more years, I’d recommend upgrading to energy-saving accessories like headlights to save fuel and slightly reduce carbon emissions. Overall, older cars offer great value for money but aren’t outstanding in terms of environmental friendliness. With proper maintenance, they can still run smoothly.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

What are the correct meshing conditions for involute spur gears?

The correct meshing conditions for involute spur gears are that the module and pressure angle must be equal respectively; the gear contact ratio must be greater than or equal to 1. Advantages of involute gears: Installation errors in center distance do not affect the instantaneous transmission ratio of the gears. Meshing introduction: Refers to a transmission relationship between two mechanical parts, known as meshing transmission. Gear transmission is the most typical meshing transmission and also the most widely used form of transmission. According to different transmission principles, there are spur gear meshing transmission and helical gear meshing transmission. It can adapt to a very wide range of speed and power transmission. The circumferential speed can range from very low to as high as 300m/s; the transmission efficiency is relatively high, with a long working life, smooth transmission, and high reliability; it can ensure a constant instantaneous transmission ratio; it can achieve transmission between two shafts in various positional requirements.
13
4
Share

What is the appropriate tire pressure for the Lavida?

The appropriate tire pressure for the Lavida is around 2.2 to 2.5. Tire pressure is very important for tires; it should not be too high or too low. If the tire pressure is too high, it will reduce the contact area between the tire and the ground, which can decrease grip and handling stability. If the tire pressure is too low, it may cause wave-like deformation during high-speed driving, increasing the risk of a tire blowout. The Lavida's body dimensions are 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm. The Lavida features front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam non-independent suspension. The body structure is a unibody design.
18
4
Share

What are the buttons on the GL8 center console?

The third-row seats of the Buick GL8 are completely fixed and can only be folded down in the more common 60/40 split. The method to fold them down is: There is a pull ring under each side of the rear seats; pulling them by hand will fold down the respective rear seats. Second-row seat folding method: The rear seats are equipped with buckle-style fixed switches at the top, with pivot links at the backrest and seat cushion. The backrest can be easily folded down with a one-touch operation, and both lowering and restoring can be done with a single button. Buick GL8 front seat adjustment (power seats): ① Move the seat position switch forward or backward to adjust the seat position. Lifting or pressing the switch will raise or lower the seat. ② Push forward: The backrest tilts forward; move backward: The backrest tilts backward. ③ Simply press the lumbar support adjustment button to adjust the height of the lumbar support. ④ The backrest tightening button can adjust the lumbar wrapping of the seat, preventing excessive driver displacement during aggressive driving. ⑤ The leg rest button operates similarly to the seat forward/backward control button; simply push it forward or backward to adjust. The Buick GL8 is an MPV launched by SAIC-GM Buick, with dimensions of 5238mm in length, 1878mm in width, and 1776mm in height, and a wheelbase of 3088mm. It is equipped with a 2.0T turbocharged engine, delivering a maximum power of 174kw, and is paired with a 9-speed automatic transmission.
10
2
Share

How to Start a Cadillac When the Key Fob Battery Dies?

Methods to start a Cadillac when the key fob battery dies: 1. Use the smart key slot—some models have it located inside the center console, while others place it under the cup holder mat; 2. Use the mechanical keyhole—push-to-start models have a metal key ignition slot. Locate this slot and insert the key blade from the remote key fob; 3. Replace the battery—visit a dealership to get a new smart key battery. Cadillac is a luxury automotive brand under General Motors (GM) and has become synonymous with high quality and luxury in North America. Main Cadillac models include the Cadillac XLR, Cadillac XTS, Cadillac XT5, and Cadillac STS.
8
1
Share

How Long Should You Wait to Open the Radiator Cap When the Car Overheats?

When the car's radiator is overheated, you need to wait for more than 15 minutes after stopping the car before safely opening the radiator cap. Otherwise, the high temperature of the radiator can easily cause burns. Methods to handle an overheated car radiator: Stop the car immediately, but do not turn off the engine right away. Keep the engine idling for a while, turn the car's heater to the maximum setting to help dissipate heat, and open the hood to assist in cooling. Only turn off the engine after the coolant temperature drops to a normal level. Generally, a car's temperature gauge reading of 90 degrees is normal. After starting the vehicle, the antifreeze temperature rises quickly. Once the needle reaches the middle position, the heat exchange balances out, and the antifreeze temperature stops rising—this is the optimal time to start driving. The main reasons for an excessively high temperature gauge reading include coolant leakage, insufficient coolant, and a faulty cooling fan. Coolant leakage or insufficient coolant: A leak in the cooling system can lead to low antifreeze levels, causing the antifreeze temperature to rise. If the antifreeze level is found to be low, first check for leaks. If there is a leak, promptly add the same type of antifreeze. Do not use tap water or other types of antifreeze, as this may cause dilution or sedimentation, leading to failure or malfunctions. Faulty cooling fan: A malfunctioning cooling fan can prevent timely heat dissipation from the antifreeze when the car engine is running at medium to high speeds, leading to increased antifreeze temperature and issues like boiling over. In such cases, the cooling fan needs to be replaced.
17
3
Share

Does a car need to undergo inspection when it reaches six years?

A car that has just reached six years needs to undergo an annual inspection. The exemption from inspection within six years refers to non-commercial passenger cars and other small and mini passenger vehicles (excluding vans and vehicles with seven or more seats), which are exempt from on-site inspection within six years. For new cars within six years, the annual inspection compliance label must be collected from the vehicle management office every two years. Upon reaching the sixth year, the vehicle must undergo on-site inspection. The items for vehicle annual inspection include: 1. Inspection of the vehicle's exterior; 2. Inspection of brakes, lights, and horn; 3. Inspection of exhaust emissions. Vehicle annual inspections can promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents. Precautions for the six-year vehicle inspection: 1. After submitting the inspection application, proceed with the on-site inspection. Drive the vehicle into the automatic inspection area to sequentially check whether the exhaust emissions, speed, lights, side slip, and chassis meet the standards. All items must pass to be approved. 2. Verify the accuracy of the vehicle's license plate, type, body color, engine number, VIN code, and frame number; inspect details such as the bumper, engine compartment, rearview mirrors, lower mirrors, window glass, paint, engine operation status, and the interior and wheels of passenger vehicles. 3. The owner can obtain the inspection report and application form from the inspector. If all inspection items pass, the owner can proceed to pay the inspection fee and collect the vehicle license and compliance label. If any items fail, the owner must repair the vehicle and participate in a re-inspection until it passes before proceeding with the visa procedures.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.