What is the emission standard of Roewe RX5?

Why is the motorcycle noisy after replacing the piston rings?

After replacing the piston rings on a motorcycle, the increased noise occurs because the new piston rings do not match the old cylinder, resulting in excessive clearance. During the engine's power stroke, the piston is subjected to high-pressure gas forces, causing it to oscillate within the cylinder and strike the cylinder walls, which produces the knocking sound. Function of piston rings: Piston rings are metal rings fitted into the grooves of a piston. There are two types: compression rings and oil rings. Compression rings seal the combustible gas mixture in the combustion chamber, while oil rings scrape excess oil from the cylinder walls. Function of the cylinder: The cylinder is a cylindrical metal component that guides the piston in linear reciprocating motion. In an engine cylinder, air expands to convert thermal energy into mechanical energy. In a compressor cylinder, gas is compressed by the piston to increase pressure.

10

4

Share

Can a Motorcycle Shift Gears Continuously?

Motorcycles can shift gears continuously. Requirements for continuous gear shifting: Continuous gear shifting means holding the clutch and shifting several gears up or down in a row. However, this operation must be performed during rapid acceleration or deceleration, and the gears shifted must match the speed after acceleration or deceleration. Alternatively, when shifting gears, do not release the clutch, otherwise it may cause severe engine strain, potentially damaging the engine or leading to loss of control and a crash. Precautions for gear shifting: Do not apply throttle while shifting gears, otherwise the engine will rev loudly and spin freely. When shifting from low to high gears, step on the throttle to increase speed, ensuring the speed matches the target gear. Once the speed is reached, quickly pull the clutch and shift gears. As long as there is no lugging, try to use higher gears, then quickly release the clutch.

2

4

Share

What is the difference between 92 and 95?

92#: Gasoline with an octane rating of 92% and a heptane rating of 8%. 95#: Gasoline with an octane rating of 95% and a heptane rating of 5%. Below are specific details about gasoline octane ratings: 1. Differences in gasoline octane ratings: The higher the octane rating of gasoline, the better its anti-knock performance. Anti-knock performance refers to the ability of gasoline to resist knocking when burned in the engine. 2. Anti-knock performance of gasoline: Higher anti-knock performance is not always better for gasoline. If the manufacturer recommends using 95# gasoline but 92# gasoline is used instead, it can cause engine knocking and reduced engine efficiency. Conversely, if the manufacturer recommends using 92# gasoline but 95# gasoline is used, it can lead to delayed ignition (i.e., the piston compresses the gasoline to the limit without reaching its auto-ignition point). Therefore, different grades of gasoline generally should not be mixed.

6

0

Share

Can the battery capacity of a underbone motorcycle be increased?

No, the capacity cannot be increased. If the battery capacity is larger than the originally specified capacity, the battery will often be in an "undercharged" state. This causes the chemical reaction between the electrolyte and the plates to always occur in the shallow part, while the deep part of the electrolyte and the plates remain dormant. The normally shed material between the plates can easily accumulate in large quantities, forming a "short circuit between plates," which accelerates the "self-discharge" rate, thereby quickly shortening the battery's lifespan. Battery lifespan: The lifespan of a battery is generally about 300 full charge-discharge cycles, meaning the higher the frequency of use, the shorter the lifespan. Typically, a battery can last from one to three years. Battery capacity: The size of motorcycle batteries is categorized as follows: 4-6 amps for 110cc displacement, 7-9 amps for 125-150cc displacement, and 9 amps for 200-250cc displacement.

1

3

Share

Can the silencer be removed from the stock exhaust of Kawasaki Z900?

Kawasaki Z900's stock exhaust cannot have its silencer removed. Once the silencer is taken off a motorcycle, the noise level becomes extremely high, and traffic police may issue penalty points if caught. Motorcycle Silencer: A motorcycle silencer is a device installed at the end of the motorcycle's exhaust pipe to reduce noise generated by exhaust emissions. It features a conical metal housing containing a silencing core. The housing's rear end is inwardly rolled, parallel to the housing wall. The silencing core consists of metal pipes of varying diameters welded together and inserted into holes on partitions within the housing. Regular Maintenance of Silencers: Since engine fuel does not combust completely during operation, and fuel contains certain impurities, high-temperature exhaust gases passing through the silencer will cause carbon deposits to accumulate on the silencer's core and partitions. Over time, these deposits can block airflow channels, increasing exhaust resistance, reducing silencing performance, causing engine power loss, and affecting normal vehicle operation. In severe cases, it may lead to blue discoloration of the exhaust pipe and engine damage due to overheating. Therefore, regular maintenance and cleaning of motorcycle silencers are essential.

10

4

Share

Is 4WD Full-Time Four-Wheel Drive or Part-Time Four-Wheel Drive?

4WD includes three forms: full-time four-wheel drive, part-time four-wheel drive, and on-demand four-wheel drive. Here is some relevant information about 4WD: 1. Introduction to 4WD: 4WD (four-wheel drive) uses low-range gearing to help vehicles overcome slipping on muddy or snowy roads, similar to driving off-road, on rocky terrain, or over rolling hills. These vehicles must shift into low-range gearing when stopped or moving at low speeds, and the shifting is done via a gear lever or button. 2. Classification of 4WD: Part-time four-wheel drive: This is a four-wheel drive system where the driver can manually choose between two-wheel drive and four-wheel drive. Full-time four-wheel drive: This type of drivetrain does not require the driver to select the operation. On-demand four-wheel drive: Vehicles with an on-demand four-wheel drive system can use a computer to select the most suitable drive mode for the current situation.

6

1

Share

What is the emission standard of Roewe RX5?

Why is the motorcycle noisy after replacing the piston rings?

Can a Motorcycle Shift Gears Continuously?

What is the difference between 92 and 95?

Can the battery capacity of a underbone motorcycle be increased?

Can the silencer be removed from the stock exhaust of Kawasaki Z900?

Is 4WD Full-Time Four-Wheel Drive or Part-Time Four-Wheel Drive?

Are there OEM mud flaps?

What Causes Vehicle Body Shaking When Driving on Smooth Roads?

What to Do When the Engine Fault Light Comes On?

Is It Normal for New Car Seats to Have No Protective Film?