What is the emission standard of Geely Panda?

1 Answers
RowanLee
07/30/25 3:26am
Geely Panda meets the China IV emission standard. China I standard: Implemented nationwide on July 1, 2001, mainly imposing restrictions on carbon monoxide, hydrocarbons, and particulate emissions. China II standard: Implemented nationwide on July 1, 2004, requiring a 30% reduction in carbon monoxide and a 55% reduction in hydrocarbons and carbon oxides. China III standard: Implemented nationwide on July 1, 2007, requiring a 40% reduction in total pollutant emissions compared to China II. China IV standard: Implemented nationwide on July 1, 2010, requiring a 50% to 60% reduction compared to China III. China V standard: Implemented nationwide on January 1, 2018, requiring a 25% reduction in nitrogen oxide emissions compared to China IV. China VI standard: China VIa was implemented nationwide on July 1, 2020, and China VIb will be implemented nationwide on July 1, 2023.
Was this review help?
15
5
Share
More Forum Discussions

What is the reason why the Volkswagen CC parking assist system cannot be used?

Volkswagen CC parking assist system failure may be caused by line or control unit failure. It is recommended that the owner go to a repair shop or 4S store for inspection in time to avoid affecting the car experience. The following is a partial introduction of the parking assist system: 1. Introduction: The parking assist system, also known as the parking radar system, can inform the driver of the surrounding obstacles through sound and visual display. It eliminates the troubles caused by the driver looking around when parking, reversing and starting the vehicle, helps the driver eliminate blind spots, and improves driving safety. 2. Working principle: Ultrasonic detection, similar to the principle that bats can fly at high speed at night without colliding with any obstacles.
10
4
Share

Is it okay not to change brake fluid for ten years?

It is not advisable to go without changing brake fluid for ten years, as this can cause the brake fluid to become turbid, lower its boiling point, reduce effectiveness, and may eventually lead to brake failure. The brake fluid system undergoes wear during use, and the brake fluid absorbs moisture from the air, leading to oxidation and deterioration. Therefore, it is necessary to replace the brake fluid in a timely manner to ensure driving safety. For ordinary household cars, it is recommended to change the brake fluid every two years. Brake fluid, also known as hydraulic brake fluid, is made from refined diesel fractions with thickeners and antioxidants. There are three types: mineral oil brake fluid, alcohol-based brake fluid, and synthetic brake fluid. The primary function of brake fluid is to act as a transmission medium in the automotive braking system.
6
1
Share

Why is the engine indicator light on?

The reasons for the engine indicator light being on are: 1. Inaccurate coordination between various components of the engine leads to poor combustion state; 2. The car lacks power, and the engine noise is too loud or there is obvious knocking sound; 3. Poor fuel quality or unclean engine cylinders with severe carbon deposits. Precautions for engine maintenance: 1. Check the antifreeze in time during winter, especially in northern regions where temperatures are low. Using ordinary water instead of antifreeze can easily cause freezing, which may lead to radiator cracking, pipe blockage, and overheating; 2. The intake system needs regular inspection. A failed air filter can cause engine failure and increase carbon deposits.
4
3
Share

What is the speed range for 2nd gear in a manual transmission?

Second gear is typically used between 20 km/h and 35 km/h. Below is a related introduction to the gears of a manual transmission car: 1. 1st gear: Used for normal starting or climbing very steep slopes. The speed in this gear is generally around 10 km/h; 2. 2nd gear: Used as a transition gear for acceleration after starting, or for low-speed driving or climbing steep slopes. The speed in this gear is generally around 20 km/h; 3. 3rd gear: Generally used at speeds between 20 km/h and 40 km/h, commonly used for city driving; 4. 4th gear: Used at speeds between 40 km/h and 60 km/h; 5. 5th gear: Used at speeds above 60 km/h, typically for high-speed driving.
8
0
Share

Which country's brand is Subaru?

Subaru is a Japanese brand. Taking the 2021 Subaru Forester as an example, its body dimensions are: length 4640mm, width 1815mm, height 1730mm, wheelbase 2670mm, minimum ground clearance 220mm, and fuel tank capacity 63L. The 2021 Subaru Forester is equipped with a 2.0L naturally aspirated engine, with a maximum power of 113kW and a maximum torque of 196Nm. It is paired with a CVT continuously variable transmission. The front suspension uses a MacPherson independent suspension, and the rear suspension uses a double-wishbone independent suspension.
4
4
Share

Which engine is used in the Trumpchi GS5?

The Trumpchi GS5 is equipped with a 1.5-liter turbocharged engine across its entire lineup, with the specific model being 4A15J1. The Trumpchi GS5 is an SUV model produced by GAC Motor, with body dimensions of 4732mm in length, 1854mm in width, and 1680mm in height, and a wheelbase of 2710mm. The Trumpchi GS5 emphasizes European urban design, featuring a double-wishbone independent front suspension and a multi-link independent rear suspension. The lightweight aluminum suspension arm design, combined with the Bosch ninth-generation ESP electronic stability system, provides excellent handling and off-road capability on slippery surfaces such as gravel and snow.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.