What is the emission standard of GAC Trumpchi GS4?

What does unpaved road mean?

Generally refers to roads other than Class A or Class B highways. Below is more information about unpaved roads: 1. Introduction: Unpaved roads are those without surface materials like slabs or concrete bricks, directly consisting of concrete surfaces, asphalt roads, or even dirt roads, gravel roads, etc. 2. Paved roads: Unpaved roads are defined in contrast to paved roads. Paved roads with a thickness of 2.5~4cm are a widely used road structural layer, typically serving as the wearing course for multi-layer asphalt surfaces, thin overlays in maintenance and repair, and pavement for bridge decks.

6

0

Share

What does ABS stand for?

Automotive ABS stands for Anti-lock Braking System. Its function is to automatically control the braking force of the brakes during vehicle braking, preventing the wheels from locking up and maintaining a state of rolling while slipping (with a slip ratio of around 20%), ensuring maximum adhesion between the wheels and the road surface. The following is an introduction to the ABS system: 1. The ABS system consists of components such as the ABS module, ABS master cylinder, oil pipes, and wheel speed sensors. 2. During braking, the ABS quickly determines the wheel lock-up state based on the speed signals from each wheel speed sensor, closing the normally open input solenoid valve on the wheel that is starting to lock up, keeping the braking force unchanged.

4

2

Share

What is the Drag Coefficient of a Car?

The drag coefficient of a car is a function of the Reynolds number, and the air resistance of the car is directly proportional to the drag coefficient. This means that the larger the drag coefficient, the greater the resistance the car experiences while driving. The magnitude of air resistance a car encounters during driving is related to many factors, such as exterior design and chassis design. The lower the car's chassis, the smaller the air resistance during driving. Additionally, the flatter the car's chassis, the less resistance it will experience. Car owners can observe the chassis of supercars; these vehicles have their chassis completely sealed with protective panels. The chassis of supercars is extremely flat and very low.

13

2

Share

What Causes the Horn to Stop Working After Vehicle Wading?

When a vehicle's horn stops working after wading through water, the reason is typically that most vehicle horns are installed near the front bumper. During wading, external water can enter the high or low-frequency horn, altering the sound. More details are as follows: 1. If you notice a change in the horn's sound, the first step is to remove the horn, either by yourself or at a professional repair facility. After removal, clear any accumulated water inside the horn and allow it to dry. 2. If the horn returns to normal after this process, it can continue to be used. However, if the horn still doesn't work after treatment, the damaged horn will need to be replaced.

15

0

Share

Which part of the car window should be struck with a safety hammer?

When a driver needs to break the window for emergency escape, they should first attempt to shatter the side window. Below is additional information about safety hammers: 1. Function: In the event of an accident where the vehicle is sealed and the doors are too damaged to open due to strong impact, using a safety hammer to break the window can help passengers escape. In such situations, the safety hammer essentially becomes a "life-saving hammer." 2. Usage: Safety hammers are typically installed in easily accessible locations within enclosed spaces like cars. In emergencies such as fires or submersion in water, the hammer should be taken down, held firmly, and the metal head used to strike the four corners and edges of the glass. This is because tempered glass is strongest in the center, making the corners and edges the weakest points.

3

1

Share

What is the actual fuel consumption of the Golf?

The Golf has a fuel consumption of 5.4L per 100 kilometers. Here is an introduction to the Golf: 1. Powertrain. Equipped with a TSI turbocharged EA211 engine. It achieves 0-100 km/h acceleration in 8.2 seconds, with maximum power at 5000-6000 RPM, maximum torque of 200 N.m, and maximum torque available between 2000-3500 RPM. 2. Body dimensions. Dimensions are 4199mm in length, 1786mm in width, and 1479mm in height, with a wheelbase of 2578mm. Curb weight is 1285kg, trunk capacity is 380L, and minimum turning diameter is 10.9 meters.

20

0

Share

What is the emission standard of GAC Trumpchi GS4?

What does unpaved road mean?

What does ABS stand for?

What is the Drag Coefficient of a Car?

What Causes the Horn to Stop Working After Vehicle Wading?

Which part of the car window should be struck with a safety hammer?

What is the actual fuel consumption of the Golf?

What is the Principle Behind Speed-Reducing Glass in Cars?

How to Deal with Foggy Windshield on Rainy Days?

Which gear should be used for overtaking in an automatic transmission car?

What happens if the parking brake is not released while driving?