What is the emission standard of Dongfeng Peugeot 3008?

1 Answers
Keith
07/28/25 3:42pm
Dongfeng Peugeot 3008 meets the China V emission standard. In terms of power, this vehicle is equipped with a 1.6T turbocharged engine. Vehicle emission standards are established to control pollutant emissions from automobiles. With the continuous development of automotive production technology, the number of vehicles in use is also increasing. The reason for implementing emission standards is primarily to reduce harmful gas emissions, inhibit the generation of harmful gases, and protect China's atmospheric environment. The Dongfeng Peugeot 3008 is a compact SUV, with body dimensions of 4435mm in length, 1840mm in width, and 1652mm in height, and a wheelbase of 2613mm.
Was this review help?
20
5
Share
More Forum Discussions

What is the transmission model of the Volkswagen Golf?

The new Golf GTI-2.0TSI is equipped with a 7-speed DSG dual-clutch transmission. The DSG dual-clutch automatic transmission is currently the most widely used dual-clutch transmission technology in the automotive industry and was the first to be applied in mass production. It utilizes a traditional gear transmission with either 6 or 7 forward gears as the power transmission component, primarily paired with engines featuring high torque platforms. Below is an introduction to the Volkswagen Golf: 1. The Golf pays meticulous attention to ergonomic design and comfort features throughout the vehicle, ensuring all functions are user-friendly. It offers comprehensive comfort and humanized care, providing users with a luxury car-like driving experience. The Golf also incorporates numerous configurations and design standards typically found in higher-end models, such as a multifunctional electric sunroof, a three-spoke genuine leather multifunction steering wheel, and advanced noise reduction and soundproofing designs. 2. The new Golf is powered by the EA211 engine. With the assistance of TSI turbocharging technology, the 1.4T model not only delivers efficient performance with a 0-100 km/h acceleration time of 8.2 seconds but also achieves a lower fuel consumption of 5.4L/100 km, saving 0.4L/100 km compared to the current model. The 1.6L model has a combined fuel consumption of 6.1L/100 km, saving 0.2L/100 km compared to the current model.
14
5
Share

Where is the VIN number on an Audi A6?

Open the hood of the Audi A6, and you will find a black plastic panel in the upper right corner of the engine compartment. Remove this panel to reveal the VIN number. Alternatively, you can locate the VIN near the windshield wipers on the front windshield or on the floor mat inside the vehicle. Additional information: 1. The VIN (Vehicle Identification Number), known in Chinese as the vehicle identification code, is a unique set of characters assigned by the manufacturer to identify a vehicle. The VIN consists of a 17-character alphanumeric code, also referred to as the 17-digit identification code, chassis number, or 17-digit number. Through various combinations, the VIN ensures that no two vehicles of the same model have the same number within 30 years, providing a unique identifier for each vehicle—hence its nickname, the "car's ID card." 2. The VIN is typically located in the lower left corner of the front windshield, on the hinge pillar, door lock pillar, or door edge of the driver's side door, making it easily visible. It may also be found in the engine compartment. If not found in these locations, it might be fixed on the inner side of the door near the driver's seat. 3. The VIN is like a fingerprint for a car. If the metal plate bearing the VIN is damaged, the owner must not attempt to cut out the plate themselves. Instead, the vehicle should be preserved in its damaged state and taken directly to the vehicle management department for certification to prove the damage. The department will then handle the situation according to the actual circumstances.
19
3
Share

Does selecting one less correct answer in the multiple-choice questions of Subject 4 count as correct?

It counts as wrong. The difficulty of the Subject 4 driving test lies in the multiple-choice questions, where neither selecting too many nor too few options is allowed. Therefore, it is essential to memorize the test questions thoroughly before the exam. Subject 4 is actually part of the Subject 3 test, specifically the safe and civilized driving knowledge exam. Hence, when booking Subject 4 online, it will appear as Subject 3. Below are some precautions for the Subject 3 safe and civilized driving knowledge exam: 1. Pay attention to the questions: When entering the exam room, carefully read each question. The questions may differ from those in the textbook, with possible variations in order and requirements. Be cautious when clicking the mouse—avoid double-clicking and only click once. 2. Questions: Once you move to the next question, you cannot change the answer to the previous one, even if it was wrong. If you are unsure about a question, you can skip it temporarily and return to it after completing the other questions. 3. Camera: During the exam, ensure that the small camera is aligned with your face, as several photos will be taken during the test. If a clear frontal photo is not captured, the exam will be considered invalid.
7
5
Share

What type of gasoline should a Camry use?

According to the official vehicle manual recommendation, the Camry should use 92-octane gasoline. In addition to checking the appropriate gasoline grade in the vehicle manual, you can also find it on the fuel tank cap, which will also be indicated. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92-octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95-octane gasoline. However, with the use of some new technologies, the gasoline grade cannot be solely determined by the compression ratio. A high compression ratio can also be adjusted to use lower-grade gasoline. This is because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline grade, the higher the octane number and the better the anti-knock performance. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. If the Camry occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower-grade gasoline, using higher-grade gasoline will not cause damage, but the increase in octane number will alter the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in poorer performance in actual driving experience. For vehicles recommended to use higher-grade gasoline, using lower-grade gasoline can cause engine knocking. Because the octane number is too low, the gasoline's ignition point decreases, causing it to ignite prematurely during the compression stroke. If the fuel ignites before the spark plug fires during the compression stroke, resistance will occur during the upward stroke. This resistance makes the engine run very unstably. If the knocking is imperceptible, it only increases noise and does not significantly damage the engine. However, if the knocking is noticeable, it indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.
15
2
Share

What are the methods for matching Nissan intelligent keys?

Nissan's intelligent car key contains a mechanical sub-key without a chip. Use the national matching instrument version 3.9, select the OBD communication port to connect with the vehicle. Once the national matching instrument is successfully connected, use the original smart car key card to illuminate the dashboard. Below is an introduction to the intelligent car key system: 1. Intelligent key system: The car intelligent keyless entry system, abbreviated as PKE, adopts the world's most advanced RFID radio frequency technology and the most advanced vehicle identity coding recognition system. It pioneers the development of miniaturized, low-power RF antenna solutions and successfully integrates remote control systems with keyless systems, while maintaining traditional vehicle circuit protection. This truly achieves a dual RF system and dual anti-theft protection, providing maximum convenience and safety for car owners. 2. Keyless entry function: When the key approaches the vehicle body, the doors automatically unlock and the anti-theft alarm is deactivated, with the turn signals flashing twice. When the key moves away from the vehicle body, the doors automatically lock and the anti-theft alarm is activated, with the turn signals flashing once and the horn sounding a short beep. The effective detection distance for the main door is no less than 1.5 meters, while other doors require proximity to the door edge for effective operation.
18
0
Share

Reasons for Audi Q5 Air Conditioning Not Cooling

Audi Q5 air conditioning not cooling may be caused by a lack of Freon, damage or leakage of the air conditioning pressure sensor leading to insufficient pressure, leakage points in the air conditioning pipes causing Freon to escape, dew points in the condenser leading to Freon leakage, or the compressor not working, which prevents the air conditioning system from operating normally. Below is an introduction to situations where the car air conditioning is not cooling: 1. No cooling at all. First, turn on the air conditioning and activate the internal circulation. If the air conditioning still does not cool, it is likely due to a lack of Freon. Adding Freon can solve the problem. 2. Poor cooling effect. There are many reasons for poor air conditioning cooling performance. Firstly, it may be affected by the panoramic sunroof; adding a thicker sunshade in the car can help. Secondly, check for any leaks, whether the two air conditioning filters are too dirty, if the condenser is too dirty, or if the radiator is too dirty. 3. Check if the AC switch inside the car is not turned on. If only the ventilation function is activated without starting the AC switch, it will not cool either. If none of the above situations apply, and the car is within three years or 100,000 kilometers, you can go directly to the 4S store for free repairs. If necessary, based on the inspection results, if it meets the claim conditions, a claim can also be filed.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.