What is the emission standard for VI?

3 Answers
StCamille
07/29/25 8:10pm
VI is the China VI emission standard. When the China VI emission standard was introduced, the country clearly defined the phased implementation of two modes: China VI a and China VI b. Among them, China VI a is equivalent to the transition stage from China V to China VI, while China VI b is the true China VI standard emission. The China VI standard has stricter limit requirements, which are 40% to 50% stricter than those of China V. In addition, unlike the different limits for gasoline and diesel vehicles in the China V stage, the China VI standard adopts the same limit requirements for gasoline and diesel vehicles based on the principle of fuel neutrality. The China VI standard adds requirements for the emission warranty period, stipulating that if there are failures or damages related to emissions within 3 years or 60,000 kilometers, leading to excessive emissions, the automobile manufacturer shall bear all costs for corresponding repairs and replacement of parts to protect the rights and interests of car owners.
Was this review help?
2
1
Share
OAdriel
08/14/25 4:27pm
I drive a lot and often pay attention to my car's environmental performance. China VI is our country's sixth-stage emission standard, which was fully implemented in 2019. I remember when I bought my current SUV, the salesperson repeatedly emphasized that it was China VI-compliant, much stricter than China V, significantly reducing pollutants in the exhaust, such as nitrogen oxides and particulate matter, which are more tightly controlled. I've checked the data—the China VI standard requires new cars to be equipped with advanced emission systems, such as more efficient three-way catalytic converters. On the road, it not only reduces smog but also saves fuel. Some big cities now offer additional benefits for China VI-compliant vehicles, such as exemption from traffic restrictions. I recommend all car owners check the vehicle's environmental label—choosing a China VI car is better for both health and the environment.
Was this review help?
17
3
Share
Expand All
Arthur
10/16/25 2:56am
After years of car repair experience, I often encounter emission-related questions when diagnosing issues for car owners. You mentioned 'VI' which should refer to China's National VI emission standard, right? It's the sixth-stage standard in China, and since its mandatory implementation in 2019, all new vehicles must comply. Here's a tip I teach car owners: check the label under the hood or use the VIN to query, and you can find out which national standard the vehicle meets. National VI is much stricter than the old standards, significantly reducing exhaust emissions. During routine maintenance, I remind owners to regularly maintain the exhaust system to ensure filtration efficiency. Such standards gradually improve air quality, which is quite practical.
Was this review help?
7
5
Share
Expand All
More Forum Discussions

What Can You Put in Your Car to Repel Mosquitoes?

You can choose the following methods to repel mosquitoes in your car: 1. Spray mosquito repellent: Choose odorless or lightly scented options with minimal side effects. 2. Place mosquito-repellent sachets: These sachets contain herbs such as honeysuckle, mugwort, cloves, mint, patchouli, and perilla leaves, whose traditional Chinese medicinal scents effectively repel mosquitoes. 3. Place orange peels: Mosquitoes dislike the scent of orange peels, which not only repels them but also eliminates odors. Here are some additional tips for removing odors from your car: 1. Activated charcoal for odor removal: Activated charcoal has abundant capillaries with strong adsorption properties. When toxic gases in the air come into contact with activated charcoal, they are adsorbed onto these capillaries, purifying the air. 2. Vinegar odor removal method: New car odors often signal air pollution inside the vehicle, possibly due to the release of harmful substances like formaldehyde and benzene. When not using the car, place a small bucket of water mixed with vinegar inside. Repeat this several times, and the odor will gradually disappear. Water can adsorb formaldehyde, while vinegar stabilizes it. 3. Fruit odor removal method: Place a few lemons or pineapples in the car. If sliced, the fruit fragrance will volatilize better, helping to neutralize odors.
15
2
Share

Where is the battery located in the Dodge Journey?

The battery of the Dodge Journey is located on the left side of the vehicle, within the engine compartment. You can remove the front wheel and take off the front fender to find the battery. There are currently 5 models of the Dodge Journey available for sale, featuring 3 different engine displacements: 2.0T, 2.4L, and 3.6L, with 1 type of transmission option (manual/automatic). The engine delivers a maximum power of 206.0kW, maximum horsepower of 280PS, and maximum torque of 350.0N·m. More details about the Dodge Journey are as follows: 1. The Dodge Journey combines the comfort and spaciousness of a family MPV with the driving performance and dynamism of an SUV. It has received the highest safety rating from the Insurance Institute for Highway Safety (IIHS) and features seven best-in-class attributes, including the only integrated child safety seat in its segment, redefining the value benchmark for large 7-seater luxury crossover SUVs. 2. As a pure American vehicle, the Dodge Journey's safety is unquestionable. Its unique reinforced structural safety body comprises 36% of the total weight in hot-stamped and high-strength steel, optimizing body weight while significantly enhancing strength. It has earned the highest 5-star safety rating from the European New Car Assessment Programme (E-NCAP) and the top evaluation from the Insurance Institute for Highway Safety (IIHS).
7
5
Share

Can the clutch be fully released in Subject 2 driving test?

In the Subject 2 driving test, the clutch cannot be fully released during maneuvers such as reversing into a garage, parallel parking, S-curve driving, starting on a slope, or making a right-angle turn. While the clutch can be released when moving between these test areas, it is still necessary to control the vehicle speed. Below are relevant introductions about Subject 2: Introduction 1: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. For small vehicles (C1/C2), the test items include five mandatory components: reversing into a garage, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-curve). Introduction 2: For large vehicles (A1/A2/A3/B1/B2), the test items include stake test, stopping and starting on a slope, parallel parking, driving over a single-plank bridge, curve driving, and right-angle turns. Introduction 3: Other test items include passing through a limited-width gate, navigating continuous obstacles, driving on bumpy roads, making U-turns on narrow roads, as well as simulations of highway driving, continuous sharp turns on mountain roads, tunnels, rain (fog) conditions, slippery roads, and emergency handling.
8
5
Share

How to Reduce a Car's Drag Coefficient?

Methods to reduce a car's drag coefficient include: 1. Using appropriate curved transitions for various parts of the car body, minimizing protruding attachments, appropriately inclining the front face, engine hood, and windshield backward, and designing the rear window and roof length and angle suitably. 2. Additionally, installing deflectors or spoilers in appropriate locations can help. By studying the airflow patterns around the car, not only can a more rational body structure be designed, but airflow can also be cleverly guided to reduce the drag coefficient by utilizing local airflow effects. More details are as follows: 1. The car's drag coefficient is a concept based on the overall structure of the vehicle. The optimal geometric parameters for one model may not apply to another, as even a small modification can significantly impact the whole, illustrating the principle that 'a slight move in one part can affect the whole situation.' Data in technical books are results obtained under strictly defined test conditions for specific car ranges. 2. Airflow passing through the car's interior also contributes to driving resistance. Research indicates that the commonly referred-to drag mostly stems from the interaction between the car's exterior and airflow. 3. In reality, the resistance acting on a car consists of five components: the pressure drag, which is the difference between the positive pressure at the front and the negative pressure at the rear, accounting for about 58% of total air resistance; the interference drag, caused by protruding parts like bumpers, mirrors, front license plates, drainage grooves, and chassis transmission mechanisms, accounting for about 14%; the internal resistance, caused by ventilation and engine cooling airflow, accounting for about 12%; and the lift-induced resistance from high-speed driving, accounting for about 7%.
3
2
Share

What is the refrigerant charging capacity for the Audi A6L?

Approximately 650g. Below is relevant information about the 2021 Audi A6L: 1. Network introduction: The new A6L comes standard with Audi connect services. Upon purchase, the owner will receive a SIM card to be inserted into the entertainment system computer. When searching for WiFi with a phone, a wireless hotspot named after the last four digits of the vehicle identification number (VIN) will appear. Adjusting the vehicle display to the playback source interface will reveal the password. 2. Vehicle overview: The 2021 Audi A6L adds features such as a hands-free trunk lid, keyless entry for the entire vehicle, Type-C ports, and multi-color ambient lighting. The dimensions are 5038 mm in length, 1886 mm in width, 1475 mm in height, with a wheelbase of 3024 mm.
12
1
Share

Why is the urea pump silent after a China V vehicle is turned off?

If the urea pump does not make any sound after the engine is turned off, it indicates that the pump is damaged. Below are specific details about the urea pump: 1. Introduction: The urea pump is a crucial component of the urea solution injection metering system. Its primary function is to extract urea solution from the urea tank, maintain a certain pressure, and then deliver it to the injection unit to meet the flow and pressure requirements of the injection metering system. 2. Composition and Principle: It mainly consists of a motor, supply pump, reverse pump, switch valve, pressure chamber, throttle orifice, etc. The pump operates in two states: supply and emptying. When supplying liquid to the urea injection system, the motor drives the supply pump to transport urea solution from the urea tank to the pressure chamber. A portion of the urea solution is used for injection, while another portion flows back to the urea tank through the throttle orifice.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.