What is the emission standard for vehicles in 2009?

1 Answers
Raymond
09/06/25 5:08am
Vehicles in 2009 are either China III or China IV emission standard. The specific emission standard depends on the brand and model of the vehicle in 2009. Methods to check the vehicle emission standard: 1. Take the vehicle registration certificate to the vehicle management office for inquiry; 2. Log in to the vehicle environmental protection website for inquiry; 3. Check the environmental protection label on the annual inspection. Vehicle emission standards refer to the regulations on the content of harmful gases such as carbon monoxide, hydrocarbons, nitrogen oxides, and PM (including particles, carbon smoke, etc.) emitted from vehicle exhaust. Since vehicle exhaust emissions mainly occur between 0.3 meters and 2 meters, they cause severe harm to human health. Controlling vehicle exhaust pollution has become a major task for environmental protection departments, automobile manufacturers, and all sectors of society.
Was this review help?
8
1
Share
More Forum Discussions

What is the ratio of antifreeze to water?

Antifreeze should not be mixed with water. Antifreeze is an alcohol-based chemical reagent designed to prevent freezing and rust. Adding water can alter its properties and reduce its effectiveness. Functions of antifreeze: Antifreeze is a special additive coolant primarily used in liquid-cooled engine cooling systems. It provides excellent performance in preventing freezing in winter, boiling in summer, and resisting scale and corrosion year-round. Composition of antifreeze: The main components of antifreeze are 50% pure water, 40% methanol, and 10% other substances. Types of antifreeze: Antifreeze is generally categorized into three types: ethanol-water type, glycerol-water type, and ethylene glycol-water type. Can different antifreeze brands be mixed? Only antifreeze of the same brand should be used. Different brands may have varying production formulas, and mixing them could trigger chemical reactions among additives, rendering them ineffective.
17
2
Share

What is the buckle on the seat belt?

A seat belt buckle is a device that can be inserted into a car's seat belt socket, preventing the seat belt alarm from sounding even if the driver does not fasten the seat belt. These buckles come in a wide variety of designs, ranging from vehicle brand logos to anime characters, basketball or soccer team emblems. Below is a detailed introduction to car seat belts: 1. Passenger Safety: Car seat belts play a crucial role in protecting passengers, especially on highways where rear passengers are also required to buckle up. A seat belt buckle is a device that can be inserted into a car's seat belt socket, preventing the seat belt alarm from sounding even if the driver does not fasten the seat belt. 2. Ensuring Driving Safety: Seat belts are the primary safeguard for a driver's safety, serving as an active safety measure. Even at relatively low speeds, in the event of a collision or sudden braking, the resulting inertia, though relatively small, can still cause the driver and passengers to lose control of their bodies, potentially colliding with hard components like the steering wheel or windshield, leading to injuries.
14
1
Share

What to Do When the Inside of the Car Windows Fog Up?

Methods to deal with fogging inside car windows: 1. Turn on the car's fan and air conditioning switch, and the cold air will blow onto the windshield, quickly clearing the fog. 2. If the fog is not heavy and it's not very cold outside, you can open the side windows slightly to allow air convection inside the car. This will gradually equalize the temperature inside the car with the outside temperature, causing the fog to dissipate. 3. You can choose to use specialized anti-fog products. 4. You can also use dishwashing liquid with a dry cloth to wipe the windows. The specific method is to mix dishwashing liquid with water, apply it evenly to the inside of the car windows with a sponge, and then wipe it clean with a car towel after it dries, leaving no water marks. Generally, this can effectively prevent fogging for up to 20 hours.
14
3
Share

What is the function of the mid-section of a car's exhaust system?

The mid-section exhaust pipe serves to reduce gas flow velocity, exhaust noise, and exhaust temperature. Below are the relevant details: 1. A car's exhaust system consists of the exhaust pipe, catalytic converter, muffler, tailpipe, etc. 2. The exhaust pipe is the pathway for exhaust gases. Its chassis layout, pipe length, diameter size, and muffler size all affect the flow of exhaust gases, preventing interference between exhaust streams from adjacent cylinders. In fuel-injected engines, the oxygen sensor is installed on the exhaust manifold, detecting the oxygen content in the exhaust and feeding this information back to the Engine Control Unit (ECU), which then determines the air-fuel mixture ratio entering the engine. 3. The exhaust manifold connects to the catalytic converter, whose function is to purify the car's exhaust gases using catalysts, converting harmful substances in the exhaust into harmless ones.
14
0
Share

How to Adjust the Height of a Car Clutch?

The method for adjusting the height of a car clutch is as follows: 1. Turn off the engine, engage the handbrake, and shift to neutral. 2. Lie down in the driver's footwell area and remove the plastic panel with lights. During removal, push firmly toward the front of the car, then pull in the opposite direction to detach it from the vehicle. Gently pull downward, being careful not to damage the wiring for the mood lights inside. 3. Use an open-end wrench to loosen the adjustment nut counterclockwise. You can then adjust the height—clockwise to lower and counterclockwise to raise. 4. After adjustment, test drive the car. If it feels right, tighten the nut clockwise to secure the screw and reinstall the plastic panel. Notes for adjusting clutch height: Clutches come in mechanical and hydraulic types. Mechanical clutches are adjustable, while hydraulic ones are not.
19
5
Share

How to Solve the Abnormal Noise from the Left Front Wheel?

Solution: Abnormal engine noise indicates that the technical state of a certain engine mechanism has changed. This is mainly caused by excessive wear of some parts or improper assembly and adjustment. Some abnormal noises can even predict potential catastrophic damage to the engine. Therefore, when abnormal noise occurs in the engine, it should be repaired promptly to prevent the fault from worsening. Here are some tire maintenance suggestions: 1. When replacing a new tire, it is best to perform a four-wheel alignment to prevent tire wear or edge wear. 2. Check the tire pressure once a month, which should be between 2.2 and 2.8. The pressure on the same axle must be the same to prevent running deviation and uneven wear. 3. Occasionally use a hard object to pick out stones stuck in the tread. 4. Pay special attention when the tire is punctured by a nail or other objects; it is best to replace it with a spare tire promptly.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.