···
Log in / Register

What is the emission standard for the 2014 Verna?

4 Answers
LaLawson
07/29/25 9:25pm

The 2014 Verna is a China V compliant vehicle. The China V emission standard imposes stricter limits on pollutants such as nitrogen oxides, hydrocarbons, carbon monoxide, and particulate matter from motor vehicles. From China I to China VI emission standards, each upgrade reduces vehicle pollution by 30% to 50%. The 2014 Verna has a body size of 4300mm in length, 1705mm in width, and 1460mm in height, with a wheelbase of 2570mm. It features a fuel tank capacity of 43 liters and a trunk capacity of 475 liters. The car is equipped with a 1.4L naturally aspirated engine, delivering a maximum horsepower of 95 PS, a maximum power of 70 kW, and a maximum torque of 132.4 Nm, paired with a 5-speed manual transmission.

Was this review help?
1
1
Share
StEmilio
08/15/25 8:09pm

I've been driving my 2014 Verna for many years now, and it meets the China IV emission standard, which was pretty mainstream back then. I remember when I bought it in 2014, the market had just transitioned from China III, so most cars were set at this level. The car still runs fine now, but you need to pay attention to policy changes. In some big cities like Beijing and Shanghai, certain districts restrict China IV vehicles during rush hours, so you might not be able to drive in. I suggest checking your vehicle registration certificate or the environmental label sticker—it clearly states the standard. As for maintenance, be diligent; the catalytic converter tends to have issues, but fixing it only costs a few hundred bucks. Overall, the Verna is quite durable, with low fuel consumption and maintenance costs, making it great for daily commutes. In the long run, consider its resale value—cars with older emission standards depreciate faster—but no need to rush to replace it; enjoy the driving experience for now.

Was this review help?
17
2
Share
Expand All
AidenDella
10/17/25 3:36am

I did my research when I bought this car. The 2014 Hyundai Verna models are almost entirely compliant with the China IV emission standard. Driving requires attention to environmental regulations because many cities now have emission restrictions, and China IV vehicles may not have an advantage. For example, I work in a restricted zone and usually have to plan my route to avoid sensitive hours. During annual inspections, the exhaust emission tests are strict—last year, I had to repair a sensor due to exceeding the limit before passing. I recommend downloading a traffic app to check local regulations to avoid fines. The emission information is printed on the vehicle certificate—just take a look. Daily use is fuel-efficient and worry-free, with ample space. In the long run, as emission standards have upgraded to China VI, it may affect resale value. Don’t slack on maintenance—replacing air filters and cleaning carbon deposits can extend the car’s lifespan. Overall, it’s fine to drive, but just be mindful of the restrictions.

Was this review help?
12
2
Share
Expand All
LeAdrian
11/30/25 4:20am

Having worked on cars for many years, I've encountered quite a few Vernas. The 2014 models are generally China IV emission standard compliant, which can be verified by checking the vehicle management certificate or VIN. Key components of the emission system like oxygen sensors often accumulate carbon deposits, so cleaning them during maintenance helps maintain proper function. For fault diagnosis, use an OBD tool to read data streams to avoid error codes causing exhaust issues. Replacement parts are affordable, costing just a few hundred yuan. Always use high-quality fuel when driving, as poor-quality fuel can worsen emission faults. Regular maintenance is recommended to ensure compliance with standards.

Was this review help?
7
3
Share
Expand All
More Forum Discussions

What is the issue with the Audi hydraulic oil elbow bushing noise?

Audi hydraulic oil elbow bushing noise issue is caused by valve oil leakage and joint detachment. Below is the relevant introduction: 1. Introduction: Audi is a renowned car developer and manufacturer, with its logo featuring four interlocking rings. It is now a subsidiary of Volkswagen Group, headquartered in Ingolstadt, Germany. 2. Main models: Audi A1, Audi A3, Audi A4, Audi A5, Audi A6, Audi A7, Audi A8, Audi Q1, Audi Q2, Audi Q3, Audi Q5, Audi Q7, Audi Q8, Audi TT, Audi R8, and the S, RS performance series, etc.
17
2
Share

Why are second-hand Besturn B50 cars so cheap?

First, the pricing is not high; second, the sales of new cars are not good, with continuous price reductions leading to depreciation of used cars; third, the marketing is poor. Additional information is as follows: 1. In terms of comfort: The Besturn B50 continues to optimize vibration and noise control, achieving improvements in areas such as passing noise and constant-speed driving vibration noise, enhancing the quietness of the cabin space. At the same time, the Besturn B50 is also equipped with an audio system configuration, such as the addition of an AUX interface, forming two external audio source playback functions with USB, providing users with more choices. 2. In terms of configuration: The Besturn B50 adds a cornering assist lighting system, which can automatically control the cornering lights (front fog lights) based on changes in driving conditions and vehicle status. In addition, new safety equipment includes a reminder for the front passenger seatbelt not being fastened, anti-whiplash seats, full hidden airbags, central locking, and headlight level adjustment.
1
5
Share

Tesla's Maximum Wading Depth?

Tesla's maximum wading depth is 138mm. Tesla's wading depth is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake is below the water level when wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. Alternatively, installing a wading snorkel can increase the height of the engine's air intake, thereby increasing the maximum wading depth. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, always turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in water, which could lead to severe damage if water enters the engine. Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, use warning water level markers, trees, or other vehicles' wheels and doors as reference points to estimate water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the tire height or the engine's air intake, avoid entering the water and choose an alternative route instead.
11
4
Share

Should the Nissan Sylphy ECO Mode Be Turned On?

In congested urban traffic conditions, turning on the ECO mode yields the best results, while it is unnecessary during high-speed driving. In stop-and-go city traffic, strong power is not required, and frequent acceleration and braking lead to higher fuel consumption. Activating the ECO mode in such scenarios not only reduces fuel consumption but also enhances driving comfort. Scenarios where ECO mode is unnecessary: There are a few situations where ECO mode is not needed: 1. When the car is driving at high speeds (up to 100km/h), even if ECO is turned on, the vehicle's computer will prioritize speed, causing the ECO mode to automatically deactivate. 2. When high torque output is required, such as when climbing hills, the engine computer will prioritize delivering sufficient power to drive the vehicle, and the ECO mode will automatically deactivate. Location of the ECO button: The ECO button is typically located on the left side of the car, marked with the letters 'ECO.' Some models feature a green button, making it easily identifiable.
12
2
Share

Do I Need to Change to Snow Tires When Driving to Northeast China During the Spring Festival?

Driving to Northeast China requires snow tires, as their grip performance is significantly better than regular summer tires or all-season tires. If you encounter icy roads, most vehicles without snow tires will be unable to move. Snow tires help vehicles achieve optimal braking performance on winter roads. Snow tires, also known as winter tires, are made by adding certain additives to ordinary rubber during production, ensuring the tires do not harden significantly in winter. Regular tires tend to become very hard in winter, reducing their grip and making them prone to slipping in snowy conditions. The tread material of snow tires is softer, and their specially formulated silica-mixed rubber compound allows for tighter contact with smooth ice surfaces, generating greater friction than all-season tires. This improves the vehicle's handling and safety on icy roads. Tires are rubber products, and prolonged use leads to aging. Therefore, it is recommended that car owners replace their tires regularly. Generally, tires should be replaced every four years. When purchasing tires, make sure to check the production date clearly.
16
2
Share

Where is the China VI Emission Standard Implemented?

The China VI emission standard has been implemented ahead of schedule in regions such as Beijing-Tianjin-Hebei, Yangtze River Delta, Pearl River Delta, Chengdu-Chongqing, Fenwei Plain, and Inner Mongolia. Specific provinces and cities include Beijing, Tianjin, Hebei, Shanxi, Shandong, Henan, Shanghai, Jiangsu, Zhejiang, Anhui, Shaanxi, some cities in Inner Mongolia, Guangdong, Chongqing, Sichuan, and Hainan. The early implementation regions are based on national-level documents such as the 'Blue Sky Defense Battle' and the 'Action Plan for the Battle Against Pollution by Diesel Trucks,' combined with statistics, leading to the issuance of the 2019 document on the early implementation of the China VI standard in these provinces and cities. For light vehicles (such as cars, SUVs, pickup trucks, and micro trucks), the normal implementation time for the China VI standard is July 1, 2020. For general-purpose heavy-duty vehicles, the implementation date is July 1, 2021.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.