What is the emission standard for the 2012 Focus?

1 Answers
LeClayton
07/28/25 9:18pm
2012 Focus is compliant with China IV emission standard. China IV generally refers to the National Phase IV Motor Vehicle Pollutant Emission Standard. The main pollutants emitted by vehicles include hydrocarbons, nitrogen oxides, carbon monoxide, and particulate matter. Through the application of technologies such as improved catalytic converter active layers, secondary air injection, and exhaust gas recirculation systems with cooling devices, the standard controls and reduces vehicle emissions to below specified limits. Taking the 2012 Focus Hatchback 1.6L Automatic Fashion model as an example, its body dimensions are: length 4368mm, width 1823mm, height 1483mm, wheelbase 2648mm, and fuel tank capacity 55L.
Was this review help?
9
0
Share
More Forum Discussions

Do the 86 and BRZ use the same suspension?

The 86 and BRZ do not use the same suspension. Both cars feature MacPherson strut independent suspension at the front, but their rear suspensions differ as follows: 1. The 86 employs a multi-link independent suspension at the rear. 2. The BRZ utilizes a double-wishbone independent suspension at the rear. Although the 86 and BRZ are built on the same platform with the development code 860B and share similar powertrains, the difference in rear suspension setups results in distinct driving experiences between the two models.
11
3
Share

What is the wading depth of Tesla Model 3?

Tesla Model 3 has a maximum wading depth of approximately 138mm. Here is some related information about the Tesla Model 3: Exterior: The overall design style follows that of the older model, with blackened treatments applied to parts such as the side turn signal covers, lower mirror trim, door handles, and window trim. Configuration: It includes added features like double-layer glass, an electric tailgate, wireless phone charging, two high-power Type-C ports, and a fifth USB port in the glove box for easy connectivity, supporting USB storage for Sentry Mode and dashcam functions.
12
5
Share

What is the minimum ground clearance of the Honda Haoying?

Honda Haoying's minimum ground clearance is 208mm. Here is some introduction about the minimum ground clearance: 1. The minimum ground clearance of a car refers to the height of the car's chassis. It is the shortest distance between the car's chassis and the ground when the car is fully loaded. Different types of cars have different minimum ground clearances, which affects the car's off-road capability. 2. In the initial regulations, the minimum ground clearance of a car could not be less than 160mm, but with the continuous development of car production technology, this regulation has been abolished.
2
2
Share

What is the displacement of the Ducati 696?

Ducati 696 is a two-cylinder motorcycle with a displacement of 696cc. Here is some related information about vehicle displacement: What is vehicle displacement: Vehicle displacement refers to the volume of fluid inhaled or exhausted per stroke or cycle, describing the size of the engine, usually measured in displacement or exhaust volume. How to choose vehicle displacement: Based on your specific needs—whether for household use, long-distance travel, or off-road adventures—the required displacement will vary. Generally, higher displacement means greater vehicle power but also higher fuel consumption.
15
5
Share

Where are the sensors located on the Toyota Corolla?

Toyota Corolla sensors are located at: 1. Oxygen sensor: The oxygen sensor is installed on the exhaust pipe to monitor whether the engine combustion is sufficient. 2. Wheel speed sensor: Generally installed on the hub of each wheel to collect the vehicle's rotation speed and determine if there are signs of skidding. 3. Water temperature sensor: Usually located near the thermostat, converting the cooling water temperature into an electrical signal. 4. Intake pressure sensor: Typically installed near the throttle valve, sensing a series of resistance and pressure changes with different engine speed loads, converting them into voltage signals for the ECU to adjust fuel injection and ignition timing angles.
11
0
Share

How to Reset the Maintenance Light on Karry?

Car maintenance light refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car maintenance. The steps to reset the Karry maintenance light are: 1. First, insert the key and turn it to the ON position. The "SERVICE" sign on the display will flash, and the sign will disappear after starting the engine, indicating that the vehicle requires maintenance. 2. Press and hold the small button for a few seconds, then release. 3. Press the small button again and gently rotate it to the right before releasing to reset the maintenance light. After maintenance, the maintenance light should be reset to zero.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.